Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"result comparison"”.

  1. Finite element model development and result comparison for human hand-arm vibration

    … mild to severe discomfort to the user, which can result from vibration-induced disorders. It is therefore necessary to reduce the vibrations transmitted to the system and discover the mechanism and kinds of vibration inputs to the system that cause damage. Much research has been done to determine …

    ttu Repository record for Finite element model development and result comparison for human hand-arm vibration (opens in a new tab)

  2. Investigation of the effect of tool geometry on the machining process

    … In addition, this study presents the machining result comparison between the new and conventional geometries as well as the failure analysis from both experimental and FEA perspectives.

    mcmaster Repository record for Investigation of the effect of tool geometry on the machining process (opens in a new tab)

  3. Application of the iterative moment method for dielectric scattering calculations

    … unknowns than the conventional MM is used. For result comparison and checking, conventional MM is discussed too. Generally, the method also applies for any arbitrarily shaped penetrable body with arbitrary dielectric distributions which will have importance in communication, medical, biological, …

    ubc Repository record for Application of the iterative moment method for dielectric scattering calculations (opens in a new tab) Download PDF for Application of the iterative moment method for dielectric scattering calculations (opens in a new tab)

  4. Pratimų ant nestabilių plokštumų poveikis jaunųjų regbininkų kojų raumenų funkcijoms ir traumų prevencijai /

    … static balance was evaluated as fair, increased result of functional movement performance showed reduced risk for trauma during physical activities. 3. After result comparison of 8 weeks balance training programme we concluded that static and dynamic balance inproved, progressed performance of …

    vilnius Repository record for Pratimų ant nestabilių plokštumų poveikis jaunųjų regbininkų kojų raumenų funkcijoms ir traumų prevencijai / (opens in a new tab)

  5. Optimising image feature zero-shot-learning with EEG

    … Finally, we demonstrate improvement over these results by designing a set of metric-learning-based deep neural network architectures, representing a more data-driven and state-of-the-art approach. This results in the first time a multi-modal network based on metric learning has been applied to …

    qu-belfast Repository record for Optimising image feature zero-shot-learning with EEG (opens in a new tab) Download PDF for Optimising image feature zero-shot-learning with EEG (opens in a new tab)

  6. A deep learning approach for identifying sarcasm in text

    … in tweets. This is done partly by comparing our results to current state-of-the art performance, and partly by making a qualitative analysis of network functionality. In addition to this, we also conduct a survey to examine the human ability to detect sarcasm in tweets for result comparison. We …

    chalmers Repository record for A deep learning approach for identifying sarcasm in text (opens in a new tab)

  7. Development of a rapid Hormosira banksii bioassay using chlorophyll a fluorescence

    … 8 h) on macroalgal gametes. This rapid time-to-result allows for timely management decisions to be made. This is significant since past macroalgal bioassays have necessitated up to a 48 h delay before results are available to decision makers. In addition to this much improved rapidity of result, …

    uts Repository record for Development of a rapid Hormosira banksii bioassay using chlorophyll a fluorescence (opens in a new tab)

  8. Long Term Evolution – License Assisted Access (LTE-LAA): Modeling and Coexistence Performance Analysis

    … is demonstrated through numerical and simulation result comparison. Model performance evaluation is examined and contrasted with the IEEE 802.11 Distributed Coordination Function (DCF) and analysis results are subsequently presented and discussed herein. Finally, succeeding model development, a …

    oklahoma-thes Repository record for Long Term Evolution – License Assisted Access (LTE-LAA): Modeling and Coexistence Performance Analysis (opens in a new tab) Restricted access

  9. Stability analysis of advanced composite arches.

    … of the geometric nonlinear analysis is stated by result comparison. Secondly, the static buckling analysis is conducted; particularly, two buckling modes are discussed, which are the limit point buckling and the bifurcation buckling. Finally, the equilibrium paths are illustrated in different …

    unsw Repository record for Stability analysis of advanced composite arches. (opens in a new tab)

  10. Ανατομική μελέτη των κολποκοιλιακών βαλβίδων, των θηλοειδών μυών και των τενοντίων χορδών της καρδιάς, στον ελληνικό πληθυσμό

    … SPSS (v.19) was used for the analysis of the results. The distribution of the results between sex and age are presented in tables for each of the measurements. The level of significance was set at p<0,05. In addition, novel measurements not described in the literatures were also included, such …

    greece Repository record for Ανατομική μελέτη των κολποκοιλιακών βαλβίδων, των θηλοειδών μυών και των τενοντίων χορδών της καρδιάς, στον ελληνικό πληθυσμό (opens in a new tab)

  11. Economic and Hydraulic Simulation Models for Evaluation of Sediment Management in a Reservoir

    … and RSEM evaluate it economically. The result comparison of current Paonia operation with hypothetical Paonia (added low-level gate) proved sluicing incoming sediment-laden flow effectively reduces sedimentation without interruption in the reservoir targeted functions like irrigating …

    byu Repository record for Economic and Hydraulic Simulation Models for Evaluation of Sediment Management in a Reservoir (opens in a new tab) Download PDF for Economic and Hydraulic Simulation Models for Evaluation of Sediment Management in a Reservoir (opens in a new tab)

  12. Statistical Calibration and Validation of a Homogeneous Ventilated Wall-Interference Correction Method for the National Transonic Facility

    … correction, are expected to produce the same result. Comparison of these independent cases with respect to the uncertainty in the correction process establishes a domain of applicability based on the capability of the method to provide reasonable corrections with respect to customer accuracy …

    vt Repository record for Statistical Calibration and Validation of a Homogeneous Ventilated Wall-Interference Correction Method for the National Transonic Facility (opens in a new tab)

  13. Porovnávání anotačních nástrojů

    Táto práca sa zaoberá problematikou porovnávania anotačných nástrojov pri práci s rozličnými dátovými sadami a získaním výsledkov porovnávania použiteľných pre vylepšenie znalostnej bázy anotátorov. V práci sú analyzované existujúce riešenia a ich nedostatky, z ktorých sú vyvodené požiadavky na …

    brno-tech Repository record for Porovnávání anotačních nástrojů (opens in a new tab)

  14. Inverse modeling to predict effective leakage area

    … the real monitor boiler gas consumption with the result calculated from the EnergyPlus model with a dynamic infiltration rate input to find the best estimation of the parameter of effective leakage area (ELA). This thesis considers only the feasibility of replacing the blower door test with the …

    gatech Repository record for Inverse modeling to predict effective leakage area (opens in a new tab)

  15. Design and Analysis of Additively Manufactured Components with Integrated Lattice Structures

    … unit cell in the optimized component. The final results of the linear analysis of the homogenized model was compared to the linear analysis of the steel sheet metal pivot bracket given by Volvo Cars. The final result comparison and analysis showed that the topology optimized pivot bracket …

    chalmers Repository record for Design and Analysis of Additively Manufactured Components with Integrated Lattice Structures (opens in a new tab)

  16. Hiperparametrų optimizavimo metodai virpesinės spektrometrijos duomenų analizėje /

    … published articles, which allows for meaningful result comparison. Datasets included MIR (FT-IR) spectra of fruit purees (classification – 0.9350 accuracy), Raman spectra of tablets (regression – 0.56 RMSE), and NIR spectra of frozen and thawed chicken (classification – 0.8760 accuracy). It was …

    vilnius Repository record for Hiperparametrų optimizavimo metodai virpesinės spektrometrijos duomenų analizėje / (opens in a new tab)

  17. Experimental investigation of water absorption in polymer-matrix composite structures

    … be categorised according to material type for result comparison. The categories were gelcoats, fillers, fibre-reinforced composites, peel ply and PVC foam. Absorption in terms of moisture content was 0.28% to 0.29% for gelcoats, 0.50% for Novolac coating, 0.76% to 1.43% for fillers, between …

    nwu-za Repository record for Experimental investigation of water absorption in polymer-matrix composite structures (opens in a new tab)

  18. The development of the Tension Connection Analyzer : a computer aided teaching tool for connection analysis and design

    … bridged. Simulation allows for an animated time-result comparison that, combined with proper instructional interface, can result in a computer aided tutorial program. The title of the developed computer aided teaching tool is the <em>Tension Connection Analyzer</em>. The Tension Connection …

    ut-knoxville Repository record for The development of the Tension Connection Analyzer : a computer aided teaching tool for connection analysis and design (opens in a new tab)

  19. Evaluation Of CO2 Flooding In Tight Formation

    … the above injection pressure variables. The result comparison demonstrates that, with the supercritical CO2 injection pressure increase, the recovery factor gets incremental trend from 8.8% up to 33% recovery. Also, the macro pore and natural fracture system were proved to contribute more on …

    nodak Repository record for Evaluation Of CO2 Flooding In Tight Formation (opens in a new tab)

Page 1 of 2