Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 242 for “"return loss"”.
-
Impedance matching techniques for ethernet communication systems
… and Electronic Engineers (IEEE) as the S11 return loss. The specifications for S11 return loss in Gigabit Ethernet are given in terms of magnitude only in the IEEE 802.3 guidelines. This does not fully take into account, however, the effects of frequency dependant impedances within the …
-
Estudo de arranjos de antenas de microfita com Patch quase-fractal para comunicações sem fio
… plane, in order to obtain better bandwidths and return loss. For feeding the structures, we used microstrip transmission line. In the design of planar structures, was used HFSS software for the simulation. Next were built and measures electromagnetic parameters such as input impedance and return …
-
A Finite Difference Time Domain Study on the Design of Microwave Catheters
… resonant frequency allowing for acceptable return loss, less than -10 dB, at a resonant frequency of 2.7 GHz without a sleeve choke and 2.45 GHz with a choke. Several designs are investigated in order to eliminate the power coupled into waves travelling along the coaxial feedline’s exterior. …
-
Design of a 4-bit phase shifter using PIN diodes and high-pass/low-pass topology at 2.45 GHz
… were used, to improve the isolation and return loss of the phase shifter. Digital control circuitry was also implemented to control the different phase states. A Monte Carlo statistical analysis was performed for sensitivity analysis used in test of repeatability. A 4-layer PCB layout was …
-
Broadband feed antenna design
… with frequency-specific farfield issues. The return loss of the antenna varied greatly with frequency, being greater than 2 dB across the entire bandwidth of the antenna and greater than 6 dB for the majority of the bandwidth of the antenna. There were significant difficulties in achieving a …
-
CAD study of linear tapered slot antenna
… within the slot region at the expense of smaller return loss, contrary to the previously obtained optimization where the base of the stub was on the side of the slot line region. Furthermore, if the rectangular cavity is replaced by a circular cavity, then there is a slight increase in the …
-
Integration of a 15-Element, VHF Bow-Tie Antenna Array into an Aerodynamic Fairing on a NASA P-3 Aircraft
… the antenna, limited bandwidth and decreased return loss. Detailed analysis through full-wave simulations and measurements identified the structural effects on the antenna. Proper compensation techniques regarding antenna design and adaption of the surrounding structure improved the antenna …
-
Remote sensing based on hyperspectral data analysis
… are made in this study: 1) Developing concept of return loss for target detection: Unlike typical radar detection methods which uses radar cross section to detect an object, it is possible to enhance the process of detection and identification of concealed targets using the wideband radar based on …
-
Design and Fabrication of Centre Frequency and Bandwidth Tunable Cavity Filters
… an absolute constant bandwidth, a reasonable return loss, and a high Q value over a relatively wide tuning range are some of the challenges in developing tunable filters for real system applications. This thesis deals with the design and implementation of combline cavity filters with bandwidth …
-
NON-ADAPTIVE ECHO CANCELLATION
… estimate was tested by measuring the echo return loss enhancement and the singing margin improvement which were provided by the echo canceller. The results of the echo return loss enhancement tests are close to theoretical predictions and compare favourably with the reported performance of …
-
Wireless Interconnects for Intra-chip & Inter-chip Transmission
… different antenna orientations and locations. Return loss and transmission coefficients are simulated in ANSYS HFSS. Moreover, wireless interconnects are designed, fabricated and tested on a 6’’ silicon wafer with resistivity of 55Ω-cm using a basic standard CMOS process. Wireless interconnect …
-
The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design
… each antenna under study is evaluated based upon return loss, operational bandwidth, and radiation pattern characteristics. For our purposes, return loss is measured using the S11-port reflection coefficient which helps characterize how efficiently the small antenna is able to be fed. Operational …
-
Receiver front-end circuits and components for millimetre and submillimetre wavelengths
… a probe structure. The measured insertion and return loss of an X-band (8.2-12.4 GHz) back-to-back structure are less than 0.5 dB and more than 17 dB, respectively, over the entire frequency band (fractional bandwidth of > 40 %). The transition is used in a submm-wave mixer. 2) Novel …
-
Analysis of an air-spaced patch antenna near 1800 MHz
… because air has the lowest permittivity and no loss. The goal of this work is to build an air-spaced patch antenna, with the minimum resonant frequency at 1800 MHz and with a return loss of at least 10 dB. This work is novel because the air-spaced patch antenna has not been extensively studied. …
-
The Design and Implementation of Continuous Frequency and Bandwidth Tunable Combline Cavity Filters
… couplings which control centre frequency, return loss ripple level and bandwidth and respectively. A variety of bespoke components are introduced and compared with each other through simulation for their effectiveness of tunability with actuation. Novel, and independent techniques for …
-
Tunable Substrate Integrated Waveguide Filters Implemented with PIN Diodes and RF MEMS Switches
… from 2.3 percent – 3.0 percent with insertion loss and return loss better than 5.4 dB and 14 dB respectively for all frequency tuning states. The second tunable design utilizes the Radant RMSW-100 MEMS switch, providing six states ranging from 1.65 GHz to 2.1 GHz. Fractional bandwidth for this …
-
Broadband phase shifter design for phased array radar systems
… proposed, where trade-offs between phase error, return loss and bandwidth are possible. Based on this method, an octave band phase shifter with an RMS phase error of 3.6? and a return loss larger than 15 dB (|S11|<-15dB) was designed. Further study of the all-pass phase shifter is also presented …
-
Novel orthomode transducer for millimeter wave and terahertz frequencies. Design, fabrication and characterization of novel probe-based orthomode transducer
… manufacturing techniques resulting in low loss, wide bandwidth and a compact design. These are all important parameters for radio astronomy applications. Several design ideas from literature are considered. Room for improvement is iden tified and the novel design is developed using an …
-
Implementação de estruturas EBG em antenas de microfitas e polarização linear-circular com metasuperfície para WLAN
… of frequency band, axial ratio and desired return loss, the optimetric tool was used, allowing to exploit results for return loss of less than -10 dB and axial ratio below 3 dB. The numerical analysis of the structures takes place through ANSYS HFSS and, to validate these results, the …
-
Design of a High Temperature GaN-Based Variable Gain Amplifier for Downhole Communications
… -11.57 dBm at 230 °C (-3.63 dBm at 25 °C). Input return loss is below 19 dB, and output return loss is below 12 dB across the entire gain control range from 25 °C to 230 °C. The variation with temperature (25 °C to 230 °C) is 1 dB for maximum gain, and 4.7 dB for gain control range. The total …
Page 1 of 13