Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"rotary table"”.

  1. Magnetically levitated six degree of freedom micro-machining rotary table

    … a six degree of freedom magnetically levitated rotary table that has one unlimited rotation axis. The actuation force is achieved by the Lorentz force. The underside of the actuator has an axial Halbach array mounted circumferentially near the outside edge. Force is produced in the stator coils …

    ubc Repository record for Magnetically levitated six degree of freedom micro-machining rotary table (opens in a new tab) Download PDF for Magnetically levitated six degree of freedom micro-machining rotary table (opens in a new tab)

  2. Trajectory generation, control, and geometric error compensation for a 9-axis micromachining center

    … a 6 degree of freedom magnetically levitated rotary table. The proposed trajectory generation algorithm resolves redundant degrees of freedom by numerically solving for axes positions from desired tool positions and orientations. Differential axes positions are found while ensuring the stroke …

    ubc Repository record for Trajectory generation, control, and geometric error compensation for a 9-axis micromachining center (opens in a new tab) Download PDF for Trajectory generation, control, and geometric error compensation for a 9-axis micromachining center (opens in a new tab)

  3. On-axis self-calibration of angle measurement errors in precision rotary encoders

    … angular position and velocity in ultra-precision rotary table based manufacturing and measurement applications. One specific application is to enable the development of maskless lithography technology used for mass manufacture of next generation semiconductors. In order to achieve accuracy well …

    ubc Repository record for On-axis self-calibration of angle measurement errors in precision rotary encoders (opens in a new tab) Download PDF for On-axis self-calibration of angle measurement errors in precision rotary encoders (opens in a new tab)

  4. Application Of Antenna Synthesis And Digital Signal Processing Techniques For Active Millimeter-wave Imaging Systems

    … mounted on arms that extend radially on a rotary table. Using this test bed a circular area with a maximum diameter of 900 mm can be scanned. The signal is down-converted using heterodyne receivers with digital in-phase and quadrature detection. Signal correlation is performed using the …

    ucf Repository record for Application Of Antenna Synthesis And Digital Signal Processing Techniques For Active Millimeter-wave Imaging Systems (opens in a new tab)

  5. Optimizing task placement in robotic cells

    … Two cases of RPs are investigated, namely a rotary table and a linear guide. An innovative method using swept volume is proposed for determining the number of independent parameters for both cases under study. The outcome of this study is an intuitive method to identify the number of …

    ets-quebec Download PDF for Optimizing task placement in robotic cells (opens in a new tab)

  6. Automated manufacturing of orthodontic appliances

    … and cure light activated liquid acrylic. The rotary table system provides orientation for the dental cast to permit surface mapping and acrylic deposition and curing. The table is able to orient the dental cast to avoid movement of the liquid acrylic on the surface of the cast before curing …

    ubc Repository record for Automated manufacturing of orthodontic appliances (opens in a new tab) Download PDF for Automated manufacturing of orthodontic appliances (opens in a new tab)

  7. Virtual prediction of volumetric errors of 5-axis machine tools

    … for all classes of machine tools, including rotary table, spindle rotary, and hybrid types. A screw-theory-based kinematic model is employed, which can be generalized to map the axis commands into the workpiece coordinate system, defining the relative motion of the tooltip with respect to the …

    ubc Repository record for Virtual prediction of volumetric errors of 5-axis machine tools (opens in a new tab) Download PDF for Virtual prediction of volumetric errors of 5-axis machine tools (opens in a new tab)

  8. Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas

    … on a linear track and synchronized with a rotary table. To accomplish this main objective, previous work is required. Each task carried out entails a methodology, objective and partial results that complement each other, namely: - It is described the architecture of the workcell in depth, …

    upv Repository record for Postprocesamiento CAM-ROBOTICA orientado al prototipado y mecanizado en células robotizadas complejas (opens in a new tab)

  9. Phosphate Exploration and Property Evaluation in Southeastern Idaho, Illustrated by the Dry Valley Area

    … profile drilling patterns using a portable rotary-table drilling rig, geophysical logging of the drill holes including gamma-radiation logs, neutron logs, temperature gradient and differential temperature logs, and bulk density logs, trenching, tunneling, and test mining. The economic …

    utahstate Repository record for Phosphate Exploration and Property Evaluation in Southeastern Idaho, Illustrated by the Dry Valley Area (opens in a new tab)

  10. Linear and traceable scales for nanometrology

    Methods for the implementation of reliable, repeatable scales are central to all measurementtechniques. Laser interferometers and diffractometers can be used for accurate dimensionalmeasurements that are readily traceable to the definitions of the SI (Système International)units. This thesis is a …

    aalto Repository record for Linear and traceable scales for nanometrology (opens in a new tab)

  11. Multi-Sensor Blue LED and Touch Probe Inspection System

    … for scanner calibration and a lightweight 2-axis rotary table for multiple-orientation scanning as well. Software in programming language C for interacting with the scanner and the CMM was developed. A sample stamped sheet metal automobile part was experimentally measured. This system is currently …

    mcmaster Repository record for Multi-Sensor Blue LED and Touch Probe Inspection System (opens in a new tab)

  12. Modeling Coordinate Measuring Machine Scanning Operations

    … speed, low-pass filter cut-off frequency, rotary table action, probe tip diameter, and ring orientation. The methods used in this work are based on techniques developed for point-to-point probing. The first phase of research develops a calibration method for the ring artifact and determines …

    utk-theses Repository record for Modeling Coordinate Measuring Machine Scanning Operations (opens in a new tab)

  13. Experimental investigation of a turbofan nacelle at different mass flow ratios and angles of attack

    … angles of attack (AoA) has been conducted using rotary table and mass flow ratios (MFR) have been controlled by varying (EDF) rotational speed in accordance with the wind tunnel air velocity. Results show that the flow around the nacelle body differs substantially depending on whether the fan is …

    chalmers Repository record for Experimental investigation of a turbofan nacelle at different mass flow ratios and angles of attack (opens in a new tab)

  14. Ultra-precise on-axis encoder self-calibration for fast rotary platforms

    … implementation, and experimental testing of a rotary platform and its use for encoder calibration research. So far, the experimental results have demonstrated a calibration repeatability of better than 200 nano-radians (0.04 arc-second), which is much better than the state of the art precision …

    ubc Repository record for Ultra-precise on-axis encoder self-calibration for fast rotary platforms (opens in a new tab) Download PDF for Ultra-precise on-axis encoder self-calibration for fast rotary platforms (opens in a new tab)

  15. Skaitmeninio navigacinio saulės jutiklio tyrimas /

    … axes, so the camera was attached to a dual axis rotary table. They can be rotated around 360 degrees. Video image was read with a free software project FFmpeg, which is used for handling multimedia data. Video stream was then processed with the program that was written in C++. It takes an image …

    vilnius Repository record for Skaitmeninio navigacinio saulės jutiklio tyrimas / (opens in a new tab)

  16. Návrh malého rotačního stolu

    Tato bakalářská práce se zabývá návrhem konstrukce, vlastní realizací a následným zprovozněním rotačního stolu. Cílem je vyrobit malý rotační stůl, který bude možné použít v laboratoři robotiky pro pick and place aplikace, případě další úkony, jako například 3D skenování objektů. První část práce …

    brno-tech Repository record for Návrh malého rotačního stolu (opens in a new tab)

  17. Konstrukční návrh otočného stolu s nosností 65 000 kilogramů

    Diplomová práce se zabývá návrhem otočného stolu pro obrábění rozměrných nerotačních obrobků do maximální hmotnosti 65 000 kg. Cílem práce je rozbor a vyhodnocení současného stavu poznání v oblasti otočných stolů, vytvoření návrhu stolu dle zadání a jeho 3D modelu s částí výkresové dokumentace. …

    brno-tech Repository record for Konstrukční návrh otočného stolu s nosností 65 000 kilogramů (opens in a new tab)

  18. In-situ monitoring and intermittent controller for adaptive trajectory generation during laser directed energy deposition via powder feeding

    … angle. The algorithm verifies the tilt angle suitable to build the dome and the angle is transferred from the tilt angle to the tilt angle of the rotary table. In order to build the bent pipe geometry, the variation in scanning speed is used to realize the adaptive slicing, which aids in having …

    waterloo Repository record for In-situ monitoring and intermittent controller for adaptive trajectory generation during laser directed energy deposition via powder feeding (opens in a new tab)

  19. Návrh robotického pracoviště pro lepení magnetů na DC motory

    Předmětem diplomové práce je návrh obecné koncepce pracoviště pro lepení magnetů do DC statorů. Práce obsahuje výběr průmyslových robotů a jejich rozmístění, návrh koncových efektorů pro manipulaci se segmenty a statory, a návrh řešení konstrukčních uzlů v pracovišti. Mezi konstrukční uzly patří: …

    brno-tech Repository record for Návrh robotického pracoviště pro lepení magnetů na DC motory (opens in a new tab)

Page 1 of 2