Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"rotor performance"”.

  1. Generalized helicopter rotor performance predictions.

    The Generalized Rotor Performance (GRP) program is a computer program designed for calculating forward flight performance of a helicopter rotor system at a specific flight condition. It can be used to evaluate either an articulated or a hingeless single rotor system in forward flight or in a …

    nps Repository record for Generalized helicopter rotor performance predictions. (opens in a new tab)

  2. A Coupled CFD/CSD Investigation of the Effects of Leading Edge Slat on Rotor Performance

    … the adverse effects of dynamic stall on rotor blade aerodynamic and dynamic response. This involved the following improvements over the existing CFD methodology to handle a multi-element airfoil rotor: incorporating the so-called Implicit Hole Cutting method for inter-mesh connectivity, …

    maryland Repository record for A Coupled CFD/CSD Investigation of the Effects of Leading Edge Slat on Rotor Performance (opens in a new tab)

  3. CFD simulation of a large-scale VAWT- Evaluation of the rotor performance for a gradient wind profile

    … and in previous aerodynamic studies of the rotor performance a uniform wind profile have been used. However, the characteristics of the landscape result in friction for the wind flow and the shear stresses generates a gradient wind profile. Hence, this study aims to investigate how the …

    chalmers Repository record for CFD simulation of a large-scale VAWT- Evaluation of the rotor performance for a gradient wind profile (opens in a new tab)

  4. Incorporation of Airfoil-Interactional Data to Improve the Accuracy of Stacked Rotor Performance Predictions in the Design Stage

    … presented for lower-fidelity modeling of stacked rotors, with improved accuracy compared to existing lower-fidelity rotor models. This methodology is built on a conventional prescribed vortex wake model of the rotor, with lifting-line airfoil blades. Such a lifting-line model cannot fully capture …

    maryland Repository record for Incorporation of Airfoil-Interactional Data to Improve the Accuracy of Stacked Rotor Performance Predictions in the Design Stage (opens in a new tab)

  5. Testing and analysis of a transonic axial compressor

    … system was commissioned and programmed for stage performance measurements. These were obtained at 50, 60, 65, 70, and 80% of the design speed before failure of the spinner retaining bolt led to the loss of the stage. The flow through the rotor was analyzed and the rotor performance predicted using …

    nps Repository record for Testing and analysis of a transonic axial compressor (opens in a new tab)

  6. A study of the effect of design parameter variation on predicted tilt-rotor aircraft performance

    … little data available for trend analysis of tile-rotor performance. This study analyzed the sensitivity of predicted tile-rotor performance to variations in six design parameters: disk loading, tip speed, solidity, download, wing loading, and wing thickness ratio. Two mission profiles were …

    nps Repository record for A study of the effect of design parameter variation on predicted tilt-rotor aircraft performance (opens in a new tab)

  7. Aerodynamic Performance and Starting Behavior of Multi-Bladed Waterpumping Windmills

    … number, Re, operation, however, complicates the rotor aerodynamic behavior due to the mutual interaction between adjacent blades. While studies on aerodynamic and starting performance of windmills indicate that increasing blade number and airfoil type are critical analysis and design parameters, …

    calgary Repository record for Aerodynamic Performance and Starting Behavior of Multi-Bladed Waterpumping Windmills (opens in a new tab)

  8. A blade design methodology for overspeed power regulation of horizontal axis tidal turbines

    … levels, an increased chance of cavitation on the rotor, and potentially detrimental thrust forces; these challenges may be best overcome with blade design alterations limiting the maximum rotational velocity.;The blade design methodology uses a design platform to set boundary conditions, an …

    strathclyde Repository record for A blade design methodology for overspeed power regulation of horizontal axis tidal turbines (opens in a new tab)

  9. Development of Hybrid Air-Water Rotor Transition Thrust Prediction and Control

    … in two vastly different fluid mediums. Multirotor HAW vehicles configurations have advantages in maneuverability, but pose a challenge in the water entry or water exit transitions. The interaction of a powered rotor with the air-water interface and its performance in a mixed air-water medium …

    maryland Repository record for Development of Hybrid Air-Water Rotor Transition Thrust Prediction and Control (opens in a new tab)

  10. Noise And Propulsive Efficiency Interactions For Rotors And Propellers At Constant Thrust

    … with an electric motor and a variable pitch rotor/propeller. The combination of the electric motor with the variable pitch propeller/rotor allows for a decoupled rotational speed and torque generation, meaning that the electric motor can generate the same amount of torque while operating at …

    embry-riddle Repository record for Noise And Propulsive Efficiency Interactions For Rotors And Propellers At Constant Thrust (opens in a new tab)

  11. Modeling helicopter blade dynamics using a modified Myklestad-Prohl transfer matrix method

    Rotor blade vibratory stresses are of utmost importance in helicopter design. A modified Myklestad-Prohl method for rotating beams has been coded to assist in preliminary helicopter rotor blade design. The rotor blade dynamics program is part of the Joint Army/Navy Rotorcraft Analysis and Design …

    nps Repository record for Modeling helicopter blade dynamics using a modified Myklestad-Prohl transfer matrix method (opens in a new tab)

  12. Modeling of unsteady aerodynamic effects on wind turbine performance

    … especially for horizontal axis wind turbine performance predictions. In the current work, the non-uniform aerodynamic effects of yaw and tower shadow were investigated on three existing rotors, the Enertech 21-5, Carter 25 and the combined experiment machines taking into account the effect of …

    ttu Repository record for Modeling of unsteady aerodynamic effects on wind turbine performance (opens in a new tab)

  13. The Darrieus wind turbine: An analytical performance study

    … of this thesis is to analyze and predict the performance of the Darrieus Wind Turbine. The analysis employs a multiple stream tube concept. The standard blade element theory is applied to each of the stream tubes to calculate the induced flow velocity which is then used to estimate the force …

    ttu Repository record for The Darrieus wind turbine: An analytical performance study (opens in a new tab)

  14. Investigation on the aerodynamic performance of cycloidal rotors with active leading-edge morphing

    A cycloidal rotor is a novel form of propulsion system which has a geometrical design differing completely from the conventional screw propeller. The blades of a cycloidal rotor rotate about the horizontal axis of rotation. A key advantage of this rotor system is the instantaneous control of the …

    glasgow Repository record for Investigation on the aerodynamic performance of cycloidal rotors with active leading-edge morphing (opens in a new tab) Download PDF for Investigation on the aerodynamic performance of cycloidal rotors with active leading-edge morphing (opens in a new tab)

  15. A two-dimensional model to predict rotating stall in axial-flow compressors

    … of these dynamic models on experimental performance data, significant effort has been devoted to the development of stage characteristic prediction techniques. As part of this ongoing effort, a model to simulate rotating stall inception and development in axial-flow compressor stages was …

    vt Repository record for A two-dimensional model to predict rotating stall in axial-flow compressors (opens in a new tab)

  16. NUMERICAL MODELING OF FLUID BEHAVIOR AROUND A HOVERING DRONE ROTOR

    … drone aids in the quantification of individual rotor performance in the hovering state. Analysis via a three-dimensional numerical model identifies specific flow characteristics that are unique to the drone blade selected for the study. These flow characteristics give insight to lifting force, …

    nps Repository record for NUMERICAL MODELING OF FLUID BEHAVIOR AROUND A HOVERING DRONE ROTOR (opens in a new tab)

Page 1 of 5