Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 101 for “"rotordynamics"”.

  1. Rotordynamics/discharge water-hammer coupling via seals in pump rotordynamics

    … to incorporate the water hammer effect with pump rotordynamics, in order to investigate the sub-synchronous instability problem observed in a field pump. Seal flow-rate perturbations due to eccentricity are calculated from Soulas and San Andres's seal code. A complete transfer function matrix …

    tamu Repository record for Rotordynamics/discharge water-hammer coupling via seals in pump rotordynamics (opens in a new tab)

  2. Rotordynamics of Twin-Screw Pumps

    … and rotor response. The topic of twin-screw pump rotordynamics is absent from the literature. The original contribution of the work presented in this dissertation to the field of rotordynamics includes: (1) demonstrating the adequacy of an axisymmetric model for modeling the screw section, (2) …

    tamu Repository record for Rotordynamics of Twin-Screw Pumps (opens in a new tab)

  3. Non-linear interactions in rotordynamics

    Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 1989

    msu Repository record for Non-linear interactions in rotordynamics (opens in a new tab)

  4. Discussion of Induction Motor Effect on Rotordynamics

    … of using induction motor in machinery train on rotordynamics is discussed. Two areas are considered – the use of variable frequency drives (VFDs), which control and drive the induction motor; and the unstable forces due motor eccentricity, which is resulted from motor rotor lateral motion. VFDs …

    tamu Repository record for Discussion of Induction Motor Effect on Rotordynamics (opens in a new tab)

  5. Electromechanical interaction in rotordynamics of cage induction motors

    Electromagnetic fields in the air gap of an electric machine produce electromagnetic forces between the rotor and stator. The total force exerted on the rotor due to the eccentric rotor position is called the unbalanced magnetic pull. This eccentricity force is directed roughly over the shortest …

    aalto Repository record for Electromechanical interaction in rotordynamics of cage induction motors (opens in a new tab)

  6. Advanced Rotordynamics Analysis through CFD-Informed Machine Learning Mixing Prediction

    The Mixing Coefficient (MC) is an uncertain, assumed parameter for predicting the leading-edge temperature of a pad film domain. The conventional approach, employing an assumed MC has shown limitations for accurately predicting rotor-bearing system performance. This leads to a temperature …

    tamu Repository record for Advanced Rotordynamics Analysis through CFD-Informed Machine Learning Mixing Prediction (opens in a new tab)

  7. An Analysis of the Impact of Flexible Coupling Misalignment on Rotordynamics

    Misalignment in turbomachinery has been commonly known to produce twotimes- running-speed (2N) response. This project aimed to investigate the source of the 2N vibration response seen in misaligned vibrating machinery by simulating misalignment through a coupling. Three flexible disc-pack couplings …

    tamu Repository record for An Analysis of the Impact of Flexible Coupling Misalignment on Rotordynamics (opens in a new tab)

  8. 3D Solid Finite Element Rotordynamics: Parametric Stability Analysis and Contact Modelling

    Conventional rotordynamic analyses generally simplify the rotor, neglecting detailed geometrical characteristics. However, in modern rotating machines, rotors consist of multiple complex-shaped parts that are usually non-axisymmetric with preloads to ensure the assembly. These effects may …

    tamu Repository record for 3D Solid Finite Element Rotordynamics: Parametric Stability Analysis and Contact Modelling (opens in a new tab)

  9. Housing Shape's Impact on Electric Submersible Pump's Equilibrium Position and Rotordynamics

    Electric Submersible Pumps (ESPs) are a subgroup of pumps designed to have small diameters to accommodate tight working environments. The long length of an ESP (5-100 stages) requires a large amount of annular seals. Each seal provides a lateral reaction force for the rotor. Lateral loading caused …

    tamu Repository record for Housing Shape's Impact on Electric Submersible Pump's Equilibrium Position and Rotordynamics (opens in a new tab)

  10. Squeeze Film Dampers in High-Speed Turbomachinery: Fluid Inertia Effects, Rotordynamics, and Thermohydrodynamics

    Unbalance induced vibrations are the main source of structural vibrations in high-speed turbomachinery. This mass unbalance is associated with the limitations and imperfections in manufacturing rotor systems and leads to a synchronous load cycle in the rotor. Squeeze film dampers (SFDs) are …

    toronto-retro Repository record for Squeeze Film Dampers in High-Speed Turbomachinery: Fluid Inertia Effects, Rotordynamics, and Thermohydrodynamics (opens in a new tab)

  11. Adapting a Beam-Based Rotordynamics Model to Accept a General Three-Dimensional Finite-Element Casing Model

    The subject of this thesis is an extension of a two-dimensional, axisymmetric, Timoshenko-beam finite-element rotordynamic code to include a three-dimensional non-axisymmetric solid-element casing model. Axisymmetric beams are sufficient to model rotors. Spring and damper forces provide the …

    tamu Repository record for Adapting a Beam-Based Rotordynamics Model to Accept a General Three-Dimensional Finite-Element Casing Model (opens in a new tab)

  12. Rotordynamics Analysis with a Hirth and Curvic Coupling: 3D Solid Finite Element and Efficient Beam Model

    … into the conventional beam-type finite element rotordynamics. The equivalent beam models are validated using a variety of axial contact models with butt joints, Hirth couplings, and Curvic couplings, with natural frequencies measured in relation to preloads. Experimental data are utilized to …

    tamu Repository record for Rotordynamics Analysis with a Hirth and Curvic Coupling: 3D Solid Finite Element and Efficient Beam Model (opens in a new tab)

  13. A Nonlinear Rotordynamics Model for Automotive Turbochargers Coupled to a Physical Model for (Semi) Floating Ring Bearing System

    Automotive turbochargers (TCs) rely on engine oil lubricated floating ring bearing systems to produce acceptable performance as per the engine volumetric efficiency, and along with proven reliability. However, these TCs produce rotordynamic responses that are rich in subsynchronous whirl motions …

    tamu Repository record for A Nonlinear Rotordynamics Model for Automotive Turbochargers Coupled to a Physical Model for (Semi) Floating Ring Bearing System (opens in a new tab)

  14. Rotordynamics in alternative energy power generation : a thesis presented in fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Albany, Auckland, New Zealand

    … main alternative energy systems that work with rotordynamics machines to generate power. Hydropower systems, wave and ocean energy, geothermal, gas turbines, wind power, tidal energy and biofuels are the most important systems that use rotating shafts to generate power. Descriptions of the …

    massey Repository record for Rotordynamics in alternative energy power generation : a thesis presented in fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Albany, Auckland, New Zealand (opens in a new tab)

  15. Dynamic Stability Evaluation of an Automotive Turbocharger Rotor-Bearing System

    … how the linear analysis of a turbocharger rotordynamics can be very beneficial for the design evaluation and maintenance purposes.

    vt Repository record for Dynamic Stability Evaluation of an Automotive Turbocharger Rotor-Bearing System (opens in a new tab)

  16. Seal inlet disturbance boundary conditions for rotordynamic models and influence of some off-design conditions on labyrinth rotordynamic instability

    … were performed to better understand seal-inlet rotordynamics. A CFD-perturbation model was employed to compute the seal-inlet flow disturbance quantities. Seal inlet disturbance boundary condition correlations were proposed from the computed seal-inlet quantities using the important parameters. …

    tamu Repository record for Seal inlet disturbance boundary conditions for rotordynamic models and influence of some off-design conditions on labyrinth rotordynamic instability (opens in a new tab)

  17. Nonlinear Prediction of Thermally Induced Rotor Instability (Morton Effect) and Experiment Verification

    … side and neglects the coupled effect on rotordynamics and bearing behavior from the other side. The assumptions above are abandoned in the current dissertation and replaced with the high-fidelity transient finite element analysis (FEA). The FEA is based on the recent …

    tamu Repository record for Nonlinear Prediction of Thermally Induced Rotor Instability (Morton Effect) and Experiment Verification (opens in a new tab)

  18. Development of a high power density rotor

    … to high speed, and thin radial builds that affect rotordynamics. Similarly, the design creates thermal challenges, of which extracting heat from a small geometry, and the difficulty of estimating windage losses because of the high speed and large diameter, are two. These challenges have been …

    uiuc Repository record for Development of a high power density rotor (opens in a new tab)

Page 1 of 6