Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"rubber composites"”.

  1. Experimental and Numerical Investigation of FDM-Printed PLA-Rubber Composites

    … to investigate the potential for valorized waste rubber to act as a Polylactic Acid (PLA) toughening agent for Fused Deposition Modelling (FDM) 3D printing. A literature review established the basis for this research, followed by experimental validation to address the identified research gaps, and …

    guelph Repository record for Experimental and Numerical Investigation of FDM-Printed PLA-Rubber Composites (opens in a new tab)

  2. Engineered polysaccharide, Alpha-1,3 Glucan, as a Functional Filler of Rubber Composites

    Rubber products represent an essential and highly functional class of performance materials required in many daily applications. However, the increasing interest in enhancing the overall material sustainability of rubber products has accelerated the focus on compatible, lightweight, and …

    waterloo Repository record for Engineered polysaccharide, Alpha-1,3 Glucan, as a Functional Filler of Rubber Composites (opens in a new tab)

  3. Finite Element Analysis of Defects in Cord-Rubber Composites and Hyperelastic Materials

    … and computational methods for analyzing composites, investigating the effect of lamina properties and lay-up configurations on the strength of composites still remains an active field of research. Finite Element Method (FEM) and Extended Finite Element Method (XFEM) are powerful tools for …

    vt Repository record for Finite Element Analysis of Defects in Cord-Rubber Composites and Hyperelastic Materials (opens in a new tab)

  4. Development and Characterization of Pellet-Printable PLA/Waste Tire Rubber Composites for 4D Additive Manufacturing

    Waste tire rubber (WTR) presents a persistent environmental challenge but also offers potential as a functional filler for polymer-based additive manufacturing. This study developed and characterized pellet-printable polylactic acid (PLA)/WTR composites for conventional and 4D printing. WTR powder …

    rit Repository record for Development and Characterization of Pellet-Printable PLA/Waste Tire Rubber Composites for 4D Additive Manufacturing (opens in a new tab)

  5. A study of the erosion suppression mechanisms of nanofilled silicone rubber composites for HVDC outdoor insulation applications

    … of nano-sized inorganic fillers in silicone rubber composites for high-voltage-direct-current outdoor insulation applications. The DC inclined plane tracking-erosion test and the dry-arc resistance test are employed to evaluate the erosion performance of the composites in the study. Thermal …

    ets-quebec Download PDF for A study of the erosion suppression mechanisms of nanofilled silicone rubber composites for HVDC outdoor insulation applications (opens in a new tab)

  6. Reinforcement of Natural Rubber using Nanostructured Carbon Materials

    … the earliest applied elastomer material, natural rubber has undergone development for nearly I 00 years, and its performance has become a bottleneck. With the development of technology, industry increasingly needs higher performance natural rubber as a new generation of shock absorbing materials …

    adelaide Repository record for Reinforcement of Natural Rubber using Nanostructured Carbon Materials (opens in a new tab)

  7. Exploring the Piezoresistive Characteristics of Solution Styrene Butadiene Rubber composites under static and Dynamic Conditions - A Novel Route to Visualize Filler Network Behavior in Rubbers

    … of a composite developed from tire rubber. Thus, a commercially available grade of solution styrene butadiene rubber (SSBR) was primarily chosen as the matrix rubber along with butadiene rubber (BR) and natural rubber (NR). The initial focus was given to develop simple strain sensors …

    qucosa-diss

  8. The acoustic field scattered from some approximate pressure release materials coating a finite cylinder/

    … from the scattering problem. Two closed cell rubbers and two cork- rubber composites (nitrile and neoprene based) were investigated. The dynamic viscoelastic constants of the materials were determined by wave propagation techniques. The far field scattering form functions for an infinite …

    nps Repository record for The acoustic field scattered from some approximate pressure release materials coating a finite cylinder/ (opens in a new tab)

  9. Thermoplastic Composites of Recycled High Density Polyethylene and Recycled Tire Particles

    … high density polyethylene (HDPE), recycled rubber tire particles, and/or ethyl co-vinyl acetate and poly (e-caprolactone). The composites were processed using a single screw extrusion system. Three groups of experiments were conducted, on the composites in their extruded form to investigate …

    eiu Repository record for Thermoplastic Composites of Recycled High Density Polyethylene and Recycled Tire Particles (opens in a new tab)

  10. In-situ generation of silica particles in solution styrene butadiene rubber – A possible material solution to improve the performance of rubber

    … However, the proper dispersion of the silica in rubber compounds is one of the challenging tasks to engineers, physicist and chemist. In this thesis, a very controlled in-situ silica based solution styrene butadiene rubber composites were developed and intensively investigated by the synthesis of …

    qucosa-diss

  11. Study on degradation of polymeric nanocomposite dielectric materials used for high voltage outdoor insulation

    Silicone rubber is a hydrophobic polymer which is widely employed for high voltage outdoor insulation under contaminated environments. Corona discharge can alter the basic chemical structure of polymer and degrade surface properties. Ultraviolet (UV) weathering is considered one of the major issues …

    unsw Repository record for Study on degradation of polymeric nanocomposite dielectric materials used for high voltage outdoor insulation (opens in a new tab)

  12. Analysis of polyhydroxyethyl methacrylate coatings on polyethylene terephthalate fabric substrates for cardiovascular prosthetic applications

    … a small amount of tissue ingrowth. Silicone rubber composites were surrounded by a thin layer of encapsulating collagen in the range of 10 to 30 (mu)m. Scanning electron microscopy (SEM) evaluation of microstructural details (e.g., the relationship of tissue penetration to the interconnecting …

    iastate Repository record for Analysis of polyhydroxyethyl methacrylate coatings on polyethylene terephthalate fabric substrates for cardiovascular prosthetic applications (opens in a new tab)

  13. Zastosowanie hydrometalowania wiązań wielokrotnych węgiel-węgiel w syntezie boro- i krzemoorganicznych bloków budulcowych dla chemii organicznej i materiałowej

    … were applied to prepare silica-reinforced rubber composites (SSBR) in cooperation with Synthos. Improvements in rolling resistance predictor and wet grip properties were noted, which positively impact lower fuel consumption (and CO2 emissions) and higher driving safety. The obtained …

    amu-pl Repository record for Zastosowanie hydrometalowania wiązań wielokrotnych węgiel-węgiel w syntezie boro- i krzemoorganicznych bloków budulcowych dla chemii organicznej i materiałowej (opens in a new tab)

  14. Mechanical and Tribological Properties of Composites of Recycled High Density Polyethylene and Recycled Rubber

    … high density polyethylene (HDPE) and recycled rubber tire particles. The materials were compounded by extrusion and formed into test specimens by injection molding. The first experiment studied the effect of recycled rubber percentage on mechanical properties of composites of recycled HDPE and …

    eiu Repository record for Mechanical and Tribological Properties of Composites of Recycled High Density Polyethylene and Recycled Rubber (opens in a new tab)

  15. Chemical Tailoring of Lignin for Functional and Sustainable Material Solutions

    … for eventual incorporation in natural rubber matrix. Lignin being the hard moiety imparted mechanical strength to the composites, while NR being the soft moiety, provided it with elastomeric characteristics. The enhanced hydrophobicity enabled the specimens to better disperse in natural …

    waterloo Repository record for Chemical Tailoring of Lignin for Functional and Sustainable Material Solutions (opens in a new tab)

  16. Synthesis, characterization, and reactivity of organometallic complexes of early and late metals and the functionalization of polydienes

    … improved physical properties of the resulting rubber composites. 2-Me2XSi-1,3-C4H5 (X = OiPr, OtBu, and NiPr2) monomers were also synthesized and studied for the functionalization of polydienes. No functional group incorporation during neodymium-based polymerizations was observed for X = OiPr …

    iastate Repository record for Synthesis, characterization, and reactivity of organometallic complexes of early and late metals and the functionalization of polydienes (opens in a new tab)

  17. Lignin derived nano-biocarbon: its deposition on polyurethane foam for wastewater dye adsorption and as a filler for composite applications

    … was performed by incorporating it in natural rubber (NR) films. At loading levels of 5 and 10 phr, it was found that improvements in tensile and tear properties were observed, along with an increase in modulus. Overall, the use of LN and NFLN biocarbons show promise for use in adsorbent, …

    waterloo Repository record for Lignin derived nano-biocarbon: its deposition on polyurethane foam for wastewater dye adsorption and as a filler for composite applications (opens in a new tab)

  18. Water Responsive Mechano-adaptive Elastomer Composites based on Active Filler Morphology

    Mechanically adaptable elastomer composites are a class of stimuli responsive polymer composites which can reversibly change its mechanical properties when it comes in contact with stimuli like electric field, light, water, solvents, ions and others. Mechanically adaptable composites are mainly …

    qucosa-diss

  19. FEM-basierte Modellierung stark anisotroper Hybridcord-Elastomer-Verbunde

    Zur Analyse der Beanspruchungen in textilverstärkten Elastomerbauteilen wie Luftfedern, Reifen, Riemen und Schläuchen sind Berechnungsmodelle mit einer feinen Balance zwischen Genauigkeit und Effizienz erforderlich. Die großen Deformationen, stark anisotropen Struktureigenschaften und kleinen …

    qucosa-diss

Page 1 of 2