Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"running surface"”.
-
Optimal Railroad Rail Grinding for Fatigue Mitigation
… a tangent rail with one-point contact at the running surface, a finite element analysis of a full-scale wheel-rail rolling contact with a nonlinear isotropic kinematic hardening material model is performed to simulate the accumulation of residual stresses and strains in the rail head. Using …
-
Optimalizace tvaru strojních součástí s vlivem variabililty vstupních údajů
… bearing geometry number of segments(m), angle of running surface(), segment inner radius(R0), and segment outer radius(R1) substitute in Reynolds’ equation. In order to know friction force, it is necessary to generate a connecting variable, oil film thickness(h0) from loading capacity(W ) and …
-
Intricate dynamics and hydrodynamic frictional losses of the piston-ring assembly in internal combustion engines
… the interaction between piston skirt, ring running surface, and the lubricating oil film was included in order to predict hydrodynamic and elasto-hydrodynamic lubrication regimes.
-
Does Wearing Multiple Pairs of Shoes Influence Injury Rates?
Running research has attempted to better understand the causes of movement-related injuries and a large segment of this research revolves around footwear and training regimens. A survey has reported lower injury rates in runners who wore multiple shoes with in a 5-month period. Previous literature …
-
Advancements and progressions in greyhound racing: a professional and personal trajectory
… of the interaction of greyhounds’ feet with the running surface.
-
Optimalizace tvaru mazací mezery hydrodynamického ložiska
… rotor speed of 45000 rpm and angle of running surface of $0.5^0$. Lubricant properties were also provided for the initial problem: oil density of $ 840 kg/m^3$, dynamic viscosity $(\eta)$ of 0.01 Pa.s With this data, the numerical solution of the Reynolds equation was computed using …
-
Gait Intervention for Improvements in Human Top Speed Running
… greater stance average forces against the running surface. Recent evidence further indicates that elite level performers also strike the ground with leg kinematics that differ from those of non-elites and that these leg movements act to enhance the force transients occurring in the …
-
Gait Intervention for Improvements in Human Top Speed Running
… greater stance average forces against the running surface. Recent evidence further indicates that elite level performers also strike the ground with leg kinematics that differ from those of non-elites and that these leg movements act to enhance the force transients occurring in the …
-
Tactical Escape Behavior and Performance of a Small Sceloporine Lizard in Two High Risk Habitats
… small terrestrial vertebrates. Variation in the running surface due to obstacles like woody debris or vegetation can alter escape paths and running performance. Additionally, these microhabitat features can influence behavioral tactics in complex environments. The ability to negotiate physical …
-
Characterisation and Understanding of Rail Steel Behaviour for In-Service Life Prediction
… steels commonly accumulate large amounts of subsurface plastic deformation due to repeated rail-wheel contacts. The accumulation of this plastic damage is known to be responsible for the generation of RCF (rolling contact fatigue) and significant instances of wear damage while in-service. An …
-
Development of High-throughput Membrane Filtration Techniques for Biological and Environmental Applications
… hydrodynamic conditions, membrane structure and surface properties can significantly influence the separation performance and the membrane’s fouling propensity. The conventional approach for studying filtration performance is to use a single lab- or pilot-scale module and perform numerous …
-
A Geometric Framework for Evaluating Compound Slopes Within the Wheelchair Footprint on a Curved Ramp
… and ICC117.1 (ICC) are based on the slope of the running surface of a ramp and the cross-slope. This is usually measured along the side of the ramp. This is suitable for straight ramps but when used on curved ramps three-dimensional geometry must be considered. This is something that the current …
-
The Effect of Surface Compliance n Knee Joint Loads During Level and Decline Running
Running is known for providing numerous health benefits that untimely leads to decreased cardiac mortality. Despite these health benefits, running can cause overuse injuries in up to 79% of runners with a high incidence rate occurring in the knee¹,². Decline running in particular is associated with …
-
Experimental Testing Procedures to Investigate and Improve Insulated Rail Joint Design and Life Cycle
… rail steel or a hardened laser clad layer on the running surface of the rail it has been found that lipping performance can be improved greatly. The work has led to the development of a new design of IBJ that incorporates material and design changes and aims to increase the life cycle of the IBJ …
-
Modelling of rail corrugation growth in curved track
… is a frequent wavy wear pattern on the running surface of the rails. The corrugation generated on curved tracks is investigated through numerical modelling. A time domain simulation model is developed that allows the growth of the corrugation to be simulated through models of the coupled …
-
Returning Female Athletes to Running Following a Tibial Bone Stress Injury
… in the wider management and successful return to running. Following a tibial BSI, a critical component to complete rehabilitation is the successful return to running, and there is a lack of consistency or strong evidence to guide this process in female athletes. Therefore, the primary aim of this …
-
Detection and characterization of rolling contact fatigue types of defects using surface acoustic waves
… Contact Fatigue or Damage (RCF/RCD) is the surface and near-surface damage that occurs on the rail head and wheel treads of rail cars. The damage in the rail head due to progressive cyclic loading from the contact between the wheel and the rail head can lead to formations of small cracks …
-
The Comparison of Treadmill and Overground Running with the Use of Inertial Measurement Units (IMUs)
Treadmill running has historically been utilized in the laboratory to mimic outdoor running. Recent developments in portable technology, such as Inertial Measurement Units (IMUs) allow researchers to assess runners in their natural environment. PURPOSE: The primary purpose of the study was to …
-
Experimental Evaluation of Wheel-Rail Interaction
… versus amount of worn material at the contact surface is analyzed and related to wheel-rail friction. It is determined that the accumulation of the worn material at the contact surface, which appears as a fine gray powder, acts as a friction modifier that increases friction. The friction …
-
Sprint biomechanics of female National Collegiate Athletic Association division track and field athlete
… the body is instantaneously in contact with the surface of the ground (contact phase). The contact phase can be divided into braking and propulsion phases according to the vertical movement of whole body center of gravity (CG) or the negative and positive horizontal reaction forces during foot …
Page 1 of 2