Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 289 for “"salt solution"”.

  1. Laplace transform simulator using a liquid salt solution of various thicknesses

    <p>The purpose of this research was to establish theoretical guidelines for testing and finding the appropriate concentration and maximum thickness of electrolyte sheet to use in a potential analogue problem.</p><p>The relation between the' network functions and the complex potential are discussed …

    ut-knoxville Repository record for Laplace transform simulator using a liquid salt solution of various thicknesses (opens in a new tab)

  2. Effectiveness of Fillers for Corrosion Protection of AISI-SAE 1018 Steel in Sea Salt Solution

    … such as supercritical carbon dioxide on salt water corrosion are systematically investigated. The constants maintained in the design of experiments were the substrate, AISI-SAE 1018 steel substrate, and the corrosive fluid synthetic sea salt solution (4.2 wt%) and the polymer, …

    unt Repository record for Effectiveness of Fillers for Corrosion Protection of AISI-SAE 1018 Steel in Sea Salt Solution (opens in a new tab)

  3. Investigation of Moisture Sorption Properties of Food Materials Using Saturated Salt Solution and Humidity Generating Techniques

    … best practices for both the standard saturated salt solution method and the new automated water sorption instruments with the Dynamic Vapor Sorption instrument as a representative instrument for obtaining moisture sorption isotherms, and (B) Explore additional applications of humidity generating …

    uiuc Repository record for Investigation of Moisture Sorption Properties of Food Materials Using Saturated Salt Solution and Humidity Generating Techniques (opens in a new tab)

  4. Viability of Human Periodontal Ligament Fibroblasts After Storage in Save-A-Tooth, EMT Toothsaver and Hank's Balanced Salt Solution

    … by replacement resorption. Hank’s Balanced Salt Solution (HBSS) has been recommended as the standard storage medium for an avulsed tooth. Save-A-Tooth and EMT Tooth saver (Dentosafe)are commercially available tooth storage media. With the best of our knowledge no study has yet compared these …

    marquette Repository record for Viability of Human Periodontal Ligament Fibroblasts After Storage in Save-A-Tooth, EMT Toothsaver and Hank's Balanced Salt Solution (opens in a new tab)

  5. The geology of the Newburg-South Westhope oil fields, Bottineau County, North Dakota

    … dissolving of deep seated, presumably Devonian, salt beds and complementary gradual subsidence of overlying sediments. Two stages of salt solution are recognized, a pre-Spearfish stage which is reflected in thickened Spearfish sediments in depressions in the New burg Field and a later …

    nodak Repository record for The geology of the Newburg-South Westhope oil fields, Bottineau County, North Dakota (opens in a new tab)

  6. Types of Structures in Southern Saskatchewan

    … structures. Chemical structures include salt solution phenomena. Tectonic structures, such as folds, faults, and jointing, can be observed in Southern Saskatchewan. Faulting is indicated in the Avonlea, North Fortal, and Woodpile Coulee areas. Tectonic folds are found at Wood Mountain and …

    sask Repository record for Types of Structures in Southern Saskatchewan (opens in a new tab)

  7. Experimental detection and reversal of crystallization fouling in a liquid-to-air membrane energy exchanger

    … transfer heat and moisture between aqueous salt solutions and air, are designed to control the temperature and humidity in buildings. However, crystallization fouling may occur under some operating conditions where the salt solution becomes saturated and degrade LAMEE performance. The …

    sask Repository record for Experimental detection and reversal of crystallization fouling in a liquid-to-air membrane energy exchanger (opens in a new tab)

  8. The susceptibility of various UK aggregates to alkali silica reaction

    … for each aggregate. These prisms were placed in salt solution to establish the effects of ASR. The results showed that an external source of NaCl does accentuate ASR in high alkali mixes. However, in low alkali mixes the ASR initiated was even greater than that developed by the high alkali mixes. …

    aston Download PDF for The susceptibility of various UK aggregates to alkali silica reaction (opens in a new tab)

  9. Studies on the nutritional requirements of Diplostomum phoxini (Strigeida trematoda) in vitro

    … develop in a medium containing glucose balanced salt solution, amino acids, yeast extract, egg albumen and horse serum at 40

    glasgow Download PDF for Studies on the nutritional requirements of Diplostomum phoxini (Strigeida trematoda) in vitro (opens in a new tab)

  10. Modeling the transient behavior of a run-around heat and moisture exchanger system

    … exchanger is compared to an available analytical solution and good agreement is obtained. It is shown that the discrepancy between the numerical and theoretical dimensionless bulk outlet temperature of the fluids is less than 4% during the transient period. The model is also validated for the case …

    sask Repository record for Modeling the transient behavior of a run-around heat and moisture exchanger system (opens in a new tab)

  11. The effects of environmental aging on the durability of glass/epoxy composites.

    … composite samples were soaked in four different solutions (distilled water, saturated salt solution, 5 M NaOH, and 1 M HCl solution) for 5 months. The samples were also subjected to a combination of temperature and sustained load at room temperature and at 60°C. The glass transition temperature …

    wvu Repository record for The effects of environmental aging on the durability of glass/epoxy composites. (opens in a new tab)

  12. Quantifying the adhesion strength of microalgae on polydimethylsiloxane surfaces

    … (PDMS), deionized water-exposed PDMS, and salt solution-exposed PDMS samples were used as substrates in adhesion experiments. The results indicate that surface hydrophobicity played a critical role in adhesion strength. At low shear stress, both B. braunii and T. rotula cells demonstrate a …

    uvic Repository record for Quantifying the adhesion strength of microalgae on polydimethylsiloxane surfaces (opens in a new tab)

  13. Dependence of Strength on Corrosion-Fatigue Resistance of AISI 4130 Steel

    … aggressive environments as a result of aqueous salts from the road coming into contact with unprotected steel. This situation greatly reduces both the life and the appearance of the affected parts. Ultra-high strength steel parts are suspected to exhibit poor corrosion-fatigue properties and be …

    gatech Repository record for Dependence of Strength on Corrosion-Fatigue Resistance of AISI 4130 Steel (opens in a new tab)

  14. Surface Corrosion Response of Al Alloys A383 and Aural 2 with Ce Additions in Aqueous NaCl and Salt-fog Environments

    … alloys to increase its strength by solid solution and precipitation strengthening, however, the corrosion resistance is inversely related to the amount of copper in the alloy. Over 70 percent of material used to produce aluminum alloys in the US come from recycled (secondary) alloys, many …

    ut-knoxville Repository record for Surface Corrosion Response of Al Alloys A383 and Aural 2 with Ce Additions in Aqueous NaCl and Salt-fog Environments (opens in a new tab)

  15. The corrosion fatigue behavior of notched 2024-T351 aluminum

    … behavior of aluminum alloy 2024-T351 in 3% salt solution. Notched characteristics of aluminum alloy 2024-T351 were found to be the same as those of other high strength aluminum alloys. Triaxiality and stress concentration were the main factors in determination of the notch characteristics. A …

    vt Repository record for The corrosion fatigue behavior of notched 2024-T351 aluminum (opens in a new tab)

  16. Influence of Surface Coating on the Degradation Properties of Metallic Orthopaedic Implants

    … to a sodium dihydrogen phosphate anhydrous solution. An immersion process for coating metallic implants was developed by submerging the implant in the stirred octacalcium phosphate reaction solution for the duration of the reaction. A design of experiment approach was then used to …

    dcu Download PDF for Influence of Surface Coating on the Degradation Properties of Metallic Orthopaedic Implants (opens in a new tab)

  17. Corrosion behaviour of fly ash-reinforced aluminum-magnesium alloy A535 composites

    … the South Saskatchewan River and 3.5 wt.% NaCl solution at room temperature. The pH of the salt solution varied from 3 to 9. For comparison, two other aluminum alloys, AA2618 and AA5083-H116, were tested in the same electrolytes. The results of the weight-loss corrosion test showed that …

    sask Repository record for Corrosion behaviour of fly ash-reinforced aluminum-magnesium alloy A535 composites (opens in a new tab)

  18. Interaction of Inorganic and Organic Fluoride Ions With Available Calcium on Root Growth in <i>Triticum vulgare</i>, L.

    … were treated with various concentrations of solutions containing CaSO4, KCl, KF, NaCL, NaF, CH3COONa, FCH2COONa, K2C2O4 and Na2EDTA and observations were recorded 24 and 48 hours after treatment. The new root growth was described with respect to root hairs, root tissue collapse and root …

    utahstate Repository record for Interaction of Inorganic and Organic Fluoride Ions With Available Calcium on Root Growth in <i>Triticum vulgare</i>, L. (opens in a new tab)

Page 1 of 15