Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 134 for “"sample holder"”.

  1. PROTON IRRADIATION SAMPLE HOLDER II (PISH II)

    … in a nuclear reactor. Previously, it used the sample holder known as PISH I to hold samples during proton or alpha particle irradiation. The sample holder controls the temperature of the sample along with monitoring the beam current during experiments. This thesis explores the design and …

    queens Repository record for PROTON IRRADIATION SAMPLE HOLDER II (PISH II) (opens in a new tab)

  2. BUTTON SAMPLE HOLDER APPLICATIONS FOR MID-INFRARED SPECTROSCOPY STUDIES OF MINERALS

    … mineralogical applications of a novel button sample holder and describes various analytical features of this new technique. Buttons are manufactured by spot welding various sizes of stainless-steel meshes to polished stainless-steel backings. The thin wire mesh and shallow well of a button …

    oklahoma-thes Repository record for BUTTON SAMPLE HOLDER APPLICATIONS FOR MID-INFRARED SPECTROSCOPY STUDIES OF MINERALS (opens in a new tab)

  3. Numerical simulation of water-cooled sample holders for high-heat flux testing of low-level irradiated materials

    … order to conduct HHF testing on the PFMs various sample holders designs were developed to accommodate radioactive specimens during HHF testing. As part of the effort to design sample holders that are compatible with the IMTS facility, numerical simulations were performed for different water-cooled …

    gatech Repository record for Numerical simulation of water-cooled sample holders for high-heat flux testing of low-level irradiated materials (opens in a new tab)

  4. Design and analysis of an instrument system for rheological testing of whole blood samples

    … design of a rheometer for testing whole blood samples through to the clotting state. While the design aims at increased measurement accuracy, the design employs well known technologies and available components. The main reason for preoccupation with blood testing is that recent investigations …

    njit Repository record for Design and analysis of an instrument system for rheological testing of whole blood samples (opens in a new tab)

  5. Examination of the Material Removal Rate in Lapping Polycrystalline Diamond Compacts

    … rate (MRR) and MRR uniformity of lapped PDC samples. Experiments that focused on several controllable lapping parameters were performed to determine to what extent they affected the process. It was determined that the MRR can be modeled with the Preston equation under certain ranges of …

    tamu Repository record for Examination of the Material Removal Rate in Lapping Polycrystalline Diamond Compacts (opens in a new tab)

  6. Apparatus and Instrumentation Design for Investigation of Surface Impact Effects on Superconductivity

    … of these experiments using the CUEBIT and a new sample holder installed in section 3. This thesis begins by presenting an overview of the CUEBIT and the basic operations of the equipment. This is followed by a brief explanation of surface physics effects on superconductivity to provide a …

    clemson Repository record for Apparatus and Instrumentation Design for Investigation of Surface Impact Effects on Superconductivity (opens in a new tab)

  7. Some Electrical Properties of Ceramic Semiconductors Containing Barium Titanate

    Some samples of a ceramic material containing barium titanate were obtained from the Globe Union Co. While some research has been reported in the field of oxide ceramic semiconductors, the material used in this thesis was a compound originated by the manufacturer, and the measurements observed are …

    marquette Repository record for Some Electrical Properties of Ceramic Semiconductors Containing Barium Titanate (opens in a new tab)

  8. Application of a Network Model for Complex Fenestration Systems

    … technique which was investigated used a sample holder inserted into an integrating sphere. This is a non-standard way of using an integrating sphere, and early analyses did not provide conclusive information as to the effect of the sample holder. A Monte Carlo analysis confirmed the …

    waterloo Repository record for Application of a Network Model for Complex Fenestration Systems (opens in a new tab)

  9. Applications of Button Sample Holders for Mid-Infrared Spectroscopy Measurements

    … that involves the use of a unique “button” sample holder. Buttons are fabricated from stainless-steel and comprise a backing to which a wire mesh is attached. This type of sample holder can accommodate thin layers of neat solid or liquid samples, eliminating the need for time-consuming and …

    oklahoma-thes Repository record for Applications of Button Sample Holders for Mid-Infrared Spectroscopy Measurements (opens in a new tab)

  10. EVALUATION OF THERMAL INTERFACE MATERIALS AND THE LASER FLASH METHOD

    … as well as an adhesive and a gel. While most samples showed little change (less than 10% in thermal resistance) or slight improvement in the thermal performance, one thermal putty material showed degradation due to temperature cycling resulting from bulk material changes near the glass …

    maryland Repository record for EVALUATION OF THERMAL INTERFACE MATERIALS AND THE LASER FLASH METHOD (opens in a new tab)

  11. Implementação da técnica de difração de elétrons de baixa energia

    … is basically mini-sputtering, whose function is sample cleaning; and set-up, maintenance and handling of the quadrupole mass spectrometer, whose main purpose is to investigate gas contamination inside the ultra-high vacuum chamber. It should be pointed out that the main contribution of this …

    brazil-ufrn Repository record for Implementação da técnica de difração de elétrons de baixa energia (opens in a new tab)

  12. A kinetic study of the thermal decomposition of calcium carbonate

    … equipment for this process is a vanadium steel sample holder approximately two inches in diameter and one inch thick. Two wells, approximately one inch apart, serve as holders for the sample and reference material. Inserted in the bottom of each well is a thermo- couple of platinum, …

    u-pacific Repository record for A kinetic study of the thermal decomposition of calcium carbonate (opens in a new tab)

  13. Design and evaluation of a temperature controlled cell for microgravity protein crystallization

    … was to design and construct a proof of concept sample holder, or cell, for use in microgravity protein research. The temperature control cell was part of the Microgravity Protein Crystallization project funded by the Iowa Space grant Consortium. The project participants included John Wiencek and …

    iastate Repository record for Design and evaluation of a temperature controlled cell for microgravity protein crystallization (opens in a new tab)

  14. Microwave dielectric measurements in potassium dihydrogen phosphate

    … also the construction of a broad band, coaxial sample holder. Preliminary measurements of the dielectric constant of potassium dihydrogen phosphate (KDP) at approximately 9.4 GHz show this to be above the dielectric relaxation frequency of this solid. Extensive measurements made to detect the …

    nps Repository record for Microwave dielectric measurements in potassium dihydrogen phosphate (opens in a new tab)

  15. Smartphone Based 3D Printed Colorimeter for Biomedical Applications

    … glucose and protein concentrations in biological samples. The key innovation of our approach was to combine powerful image processing encoded into a mobile phone application with a low cost 3D printed sample holder that allowed to control lighting conditions and significantly improved sensitivity. …

    usf Repository record for Smartphone Based 3D Printed Colorimeter for Biomedical Applications (opens in a new tab)

  16. TEMPERATURE-INDUCED SPECTRAL ARTIFACTS IN FOURIER TRANSFORM INFRARED (FTIR) SPECTROSCOPY. OPTIMIZATION OF VARIABLE TEMPERATURE DIFFUSE REFLECTION FTIR SPECTROSCOPY INSTRUMENTATION

    … conduct experiments designed to identify subtle sample structure changes resulting from external perturbations. In particular, variable temperature diffuse reflection infrared Fourier transform spectroscopy (VT-DRIFTS) can be used to associate specific structure changes with incremental additions …

    oklahoma-thes Repository record for TEMPERATURE-INDUCED SPECTRAL ARTIFACTS IN FOURIER TRANSFORM INFRARED (FTIR) SPECTROSCOPY. OPTIMIZATION OF VARIABLE TEMPERATURE DIFFUSE REFLECTION FTIR SPECTROSCOPY INSTRUMENTATION (opens in a new tab)

  17. Saturation Dependent Dielectric Constant Measurements of Carbonates between 1 MHz and 300 MHz

    … Maxwell-Wagner term by studying clean, carbonate samples with porosities ranging from 8% to 18%. The reflection coefficient was measured from at frequencies between 1 MHz and 300 MHz using an impedance analyzer and dielectric sample holder. Matlab programs were written and utilized to automate the …

    houston Repository record for Saturation Dependent Dielectric Constant Measurements of Carbonates between 1 MHz and 300 MHz (opens in a new tab)

  18. Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication

    … for more effective cooling of the dipstick and sample holder, and the installation of a capillary doser for concentrating the precursor gas to the tip-ample junction during silicon nanostructure growth. The updated cooling plate is able to shorten the total sample preparation time from 6 hours …

    uiuc Repository record for Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication (opens in a new tab)

Page 1 of 7