Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"saturation exponent"”.

  1. Determination of saturation exponent using well logs

    Includes bibliographical references.

    colo-mines Repository record for Determination of saturation exponent using well logs (opens in a new tab)

  2. The effect of fractional wettability on the Archie saturation exponent

    The determination of fluid saturations from electric well logs uses a calculation procedure which is highly sensitive to a parameter known as the Archie saturation exponent. Evidence has been found that this parameter is affected by the wettability of the grains which comprise the matrix of the …

    texas Repository record for The effect of fractional wettability on the Archie saturation exponent (opens in a new tab)

  3. THE DEPENDENCE OF ELECTRICAL RESISTIVITY, SATURATION AND SATURATION EXPONENT ON MULTI-PHASE FLOW INSTABILITY

    … between electrical resistivity and water saturation in a porous medium, depends on multiphase flow instability leading to flow channeling. In this research a series of 34 flow experiments were conducted in a thin, two-dimensional tank (55cm x 55cm x 3.75cm) packed with 2mm glass beads …

    clemson Repository record for THE DEPENDENCE OF ELECTRICAL RESISTIVITY, SATURATION AND SATURATION EXPONENT ON MULTI-PHASE FLOW INSTABILITY (opens in a new tab)

  4. Electrical resistivity of partially saturated sandstones

    … can provide information on the level of water saturation, Sw, and the pore-scale fluid distribution. The objective of this thesis was to study the effect of fluid distribution on electrical resistivity measurements. In this study two methods were used to change the fluid/air distribution within …

    ubc Repository record for Electrical resistivity of partially saturated sandstones (opens in a new tab) Download PDF for Electrical resistivity of partially saturated sandstones (opens in a new tab)

  5. Shaly sand interpretation using CEC-dependent petrophysical parameters

    … of petrophysical parameters such as cementation exponent, saturation exponent and effective porosity as a function of cations exchange capacity (CEC), and its impact on shaly sand interpretation. Experimental and field data were used in the study. The latest LSU model for shaly sand …

    lsu-thes Repository record for Shaly sand interpretation using CEC-dependent petrophysical parameters (opens in a new tab)

  6. Assessing the influence of diagenesis on reservoir quality: Happy Spraberry Field, Garza County, Texas

    … did not produce any reliable value of water saturation (Sw). An attempt to take advantage of wireline log data indicates that the saturation exponent (n) may be variable in this reservoir.

    tamu Repository record for Assessing the influence of diagenesis on reservoir quality: Happy Spraberry Field, Garza County, Texas (opens in a new tab)

  7. Wettability Assessment in an Asphaltic-Shaly Sandstone Reservoir Using Relative Permeability, Capillary Pressure, and Resistivity

    … to investigate the application of the water saturation-crossover point for wettability assessment. The effect of pore-body to pore-throat ratio on the microscopic displacement efficiency and residual non-wetting fluid saturation was observed in the forced imbibition simulation. The study …

    tamu Repository record for Wettability Assessment in an Asphaltic-Shaly Sandstone Reservoir Using Relative Permeability, Capillary Pressure, and Resistivity (opens in a new tab)

  8. Petrophysical study of the Glorieta-Clearfork dolomite in the Monahans Field, Ward County, Texas

    Calculation of a reservoir's water saturation using the Archie equation requires the values for cementation exponent (m) and saturation exponent (n). Determination of these two parameters, particularly in carbonate reservoirs, is often difficult. Recently a new method (CAPE) for estimating m and n …

    ttu Repository record for Petrophysical study of the Glorieta-Clearfork dolomite in the Monahans Field, Ward County, Texas (opens in a new tab)

  9. Drill Cuttings, Petrophysical, and Geomechanical Models for Evaluation of Conventional and Unconventional Petroleum Reservoirs

    … and non-effective porosity and the porosity exponent (m) of naturally fractured reservoirs. 2) The use of electromagnetic mixing rules for construction of dual and triple porosity models with a view to quantify the water saturation exponent (n) and to estimate the wettability of reservoir …

    calgary Repository record for Drill Cuttings, Petrophysical, and Geomechanical Models for Evaluation of Conventional and Unconventional Petroleum Reservoirs (opens in a new tab)

  10. Waterflood feasibility of the Brushy Canyon Formation: Red Tank field, Lea County, New Mexico

    … factor measurements indicate a cementation exponent of 1.41 and an a coefficient of 1.28. A saturation exponent of 1.80 was obtained using a modified Maute method (1992). Relative permeability measurements indicate this reservoir to be uniformly water-wet. From the relative permeability …

    ttu Repository record for Waterflood feasibility of the Brushy Canyon Formation: Red Tank field, Lea County, New Mexico (opens in a new tab)

  11. High Resolution Geophysical Characterization of a Gasoline Release into a Sand Column

    … measured using the resistivity method. Water saturation values were calculated using conductivity and permittivity values before and after each injection. Different values of saturation exponent (n) were tested for Archie’s law until an appropriate value was found which gave the best water …

    waterloo Repository record for High Resolution Geophysical Characterization of a Gasoline Release into a Sand Column (opens in a new tab)

  12. Petrophysical and mineralogical evaluation of shale gas reservoirs: a Cooper Basin case study

    … and total porosity as well as estimated brine saturation. These uncertainties in the results raised the question, which tools/standards are suitable for petrophysical and mineralogical evaluation of shale gas reservoir. This research outcome tried to answer the above questions and tells how …

    adelaide Repository record for Petrophysical and mineralogical evaluation of shale gas reservoirs: a Cooper Basin case study (opens in a new tab)

  13. STORMWATER MANAGEMENT PRACTICE MONITORING USING LONG-TERM TIME LAPSE ELECTRICAL RESISTIVITY TOMOGRAPHY AND SOIL SENSORS: IMPLICATIONS FOR DESIGN, MAINTENANCE, AND SOIL MOISTURE MONITORING

    … in resistivity when soil sensors indicated saturation. This resistivity change began to decrease and finally reached pre-SRT levels (0 – 5% change) after 68 hours, leading to our estimate of a three day recovery time for SMP A. Interestingly, inflow/outflow measurements at SMP A showed that …

    temple Repository record for STORMWATER MANAGEMENT PRACTICE MONITORING USING LONG-TERM TIME LAPSE ELECTRICAL RESISTIVITY TOMOGRAPHY AND SOIL SENSORS: IMPLICATIONS FOR DESIGN, MAINTENANCE, AND SOIL MOISTURE MONITORING (opens in a new tab)