Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"selective heating"”.

  1. Dewatering of fine coal slurries by selective heating with microwaves

    … dewatering coal. Consequently, dewatering using selective heating by conventional microwaves at 2.45 GHz and IR heating at 10 14 Hz was undertaken as the primary focus of this project. The basis for this choice is the fact that theoretically water absorbs 120 times more microwave energy than …

    wvu Repository record for Dewatering of fine coal slurries by selective heating with microwaves (opens in a new tab)

  2. A Numerical Model for Thermal Effects in a Microwave Irradiated Catalyst Bed

    … analysis is used to determine possibility of selective heating of nanometer-sized, metallic catalyst particles attached to a ceramic support through microwave irradiation. This analysis is incorporated into a macroscopic heat transfer model of a packed and fluidized catalyst bed heated by a …

    vt Repository record for A Numerical Model for Thermal Effects in a Microwave Irradiated Catalyst Bed (opens in a new tab)

  3. Numerical Simulation of Interbedded Shale Failure in Oilsand Reservoirs by Electromagnetic Wave Excitation

    This thesis work offers an exploratory study of selective heating and fracturing of a shale layer embedded into an oilsand material. A three phase (oil-water-steam) thermal-fluid flow formulation enriched with electromagnetic physics is developed to serve as a basic model to investigate whether …

    calgary Repository record for Numerical Simulation of Interbedded Shale Failure in Oilsand Reservoirs by Electromagnetic Wave Excitation (opens in a new tab)

  4. TRANSIENT AND MECHANICAL PROPERTIES OF POLY(PHTHALALDEHYDE) AND THE VARIABLE FREQUENCY MICROWAVE CURING OF HIGH-PERFORMANCE THERMOSETS

    … for complete cure. Variable frequency microwave heating as an alternative to conventional, thermal heating has been proposed as a method for reducing cure times and temperatures. However, proposed and sometimes conflicting microwave heating phenomena described by scientists and engineers are …

    gatech Repository record for TRANSIENT AND MECHANICAL PROPERTIES OF POLY(PHTHALALDEHYDE) AND THE VARIABLE FREQUENCY MICROWAVE CURING OF HIGH-PERFORMANCE THERMOSETS (opens in a new tab)

  5. Local Heating and Curing of Carbon Nanocomposite Adhesives Using Radio Frequencies

    … carbon nanoparticles producing a strong, rapid heating response in the presence of a radio-frequency electromagnetic field is explored, and this extremely selective heating property is used to cure nanocomposite thermoset adhesives without harming the surrounding plastic components. By …

    tamu Repository record for Local Heating and Curing of Carbon Nanocomposite Adhesives Using Radio Frequencies (opens in a new tab)

  6. Melting Processes and Laser Manipulation of Strongly Coupled Yukawa Systems

    … spherical dust crystals and mechanisms for the selective heating of the dust particles. The observed dust crystals are composed of micrometer-sized plastic spheres, which become negatively charged inside an rf-plasma, and are therefore subject to strong (screened) Coulomb interactions. In a …

    cau-kiel Repository record for Melting Processes and Laser Manipulation of Strongly Coupled Yukawa Systems (opens in a new tab)

  7. Micro flow control using thermally responsive polymer solutions

    … of the polymer Pluronic will be discussed. Selective heating of small regions of microfluidic channels, which leads to localized gel formation in these channels and reversible channel blockage, will be used to control a membrane valve that controls flow in a separate channel. This new …

    ubc Repository record for Micro flow control using thermally responsive polymer solutions (opens in a new tab) Download PDF for Micro flow control using thermally responsive polymer solutions (opens in a new tab)

  8. Onset of selective laser flash sintering in 8YSZ

    … sample temperatures are approximately uniform. Selective Laser Flash Sintering (SLFS) combines the highly dynamic heating of a scanning laser with an electric field to selectively initiate flash sintering, only where the laser heats the ceramic. The evidence that flash sintering has been …

    texas Repository record for Onset of selective laser flash sintering in 8YSZ (opens in a new tab)

  9. Multiphysics Modeling of Microwave-Assisted Calcination of SOEC Perovskite Precursors

    … SOEC per- ovskite precursor powders. Microwave heating offers distinct advantages, including volumetric and selective heating, reduced processing times, and improved energy utilization compared to con- ventional thermal methods. A multiphysics modeling framework is developed, which integrates …

    wvu Repository record for Multiphysics Modeling of Microwave-Assisted Calcination of SOEC Perovskite Precursors (opens in a new tab)

  10. Radio frequency (RF) assisted disinfestation of red flour beetle (Tribolium castaneum) in stored canola seeds (Brassica napus L.)

    … (remaining toxic chemicals, inefficient heating, long treatment time, etc). One of the alternative methods for the disinfestation is radio frequency (RF) heating based on electromagnetic radiation. The main advantage of the RF heating over thermal gradient driven conventional heating …

    sask Repository record for Radio frequency (RF) assisted disinfestation of red flour beetle (Tribolium castaneum) in stored canola seeds (Brassica napus L.) (opens in a new tab)

  11. The Design of a Magnetic Component for Induction Brazing

    … and brazed. The current brazing process requires heating the whole jaw in a furnace for 4 hours, an inefficient and time consuming process. Induction brazing offers a much faster, cheaper alternative that reduces electricity consumption. Through the development of a concentrated induction coil, …

    auckland-tech Repository record for The Design of a Magnetic Component for Induction Brazing (opens in a new tab)

  12. Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive

    … of the conductive nanoparticles allows for selective heating of the adhesive via exposure to electromagnetic (EM) radiation and simultaneously can augment the mechanical properties of the adhesive and the adhesive joint. This approach provides a versatile mechanism for efficiently creating …

    msu Repository record for Application of high-impact polystyrene (HIPS) as a graphene nanoparticle reinforced composite thermoplastic adhesive (opens in a new tab)

  13. Thermal emission control with periodic microstructures.

    … Using this, the control of thermal emission by selective heating of periodic structures is explored. It is found that local periodic heating allows control over which peaks appear in the thermal emission spectrum. The modification of thermal emission using a self-assembled metallic photonic …

    umn Repository record for Thermal emission control with periodic microstructures. (opens in a new tab)

  14. Site-Specific Radio Frequency Heating of Nanomaterials and Conductive Polymers

    Carbon nanomaterials show remarkable heating rates in response to applied radio frequency (RF) fields, enabling non-contact, rapid, site, and frequency selective heating. In this dissertation, the RF heating behavior of nanomaterials and conductive polymers was studied and applied in the field of …

    tamu Repository record for Site-Specific Radio Frequency Heating of Nanomaterials and Conductive Polymers (opens in a new tab)

  15. Assessment of Time Reversal Methods Used For RF Hyperthermia in Cancer Treatment

    … technique, is introduced to enhance specific heating on the target while reducing the non-specific heating elsewhere. TR is applied to electromagnetics (EM) recently due to its intrinsic temporal and spatial focusing properties coming from the linear reciprocity of the Maxwell’s equations. It …

    houston Repository record for Assessment of Time Reversal Methods Used For RF Hyperthermia in Cancer Treatment (opens in a new tab)

  16. Dielectric Properties of Minerals and Ores and the Application of Microwaves for Assisted Comminution and Ore Sorting

    … while in general, gangue minerals do not. This selective heating leads to differential thermal expansion across phase boundaries and causes microfractures, which can improve liberation and reduce ore competency. During ore sorting, the heat signature is detected using infrared sensors to accept …

    toronto-retro Repository record for Dielectric Properties of Minerals and Ores and the Application of Microwaves for Assisted Comminution and Ore Sorting (opens in a new tab)

  17. Stereoselective synthesis of piperidines

    … TMSC1 to give cyclic iminium salts v. Diastereoselective reduction of the iminium salts v with NaBH(OAc)[sub]3 gave piperidines vi which, after cleavage of the chiral protecting group gave the desired enantiomerically-enriched, 2-substituted piperidines vii. [Illustrated] The piperidines vii …

    glasgow Download PDF for Stereoselective synthesis of piperidines (opens in a new tab)

  18. Characterization of zirconia-alumina composites sintered using 2.45 GHz radiation

    … GHz microwave radiation.</p> <p>The microwave heating process has shown potential for uniform material heating on a macroscopic scale, and internal and volumetric heating, and selective heating on the both a macroscopic and microscopic scale with rapid heating rates possible. This work showed …

    ut-knoxville Repository record for Characterization of zirconia-alumina composites sintered using 2.45 GHz radiation (opens in a new tab)

  19. Development of a Novel Technology for Rapidly Austenitizing Usibor® 1500P Steel

    … of automotive manufacturing. It involves slowly heating Usibor® 1500P steel (a 22MnB5 steel substrate with a protective Al-Si coating) sheets to temperatures exceeding 880 °C, and holding it for a fixed amount of time to ensure the crystallographic structure has become fully austenitic. Once …

    waterloo Repository record for Development of a Novel Technology for Rapidly Austenitizing Usibor® 1500P Steel (opens in a new tab)

  20. Microwave Assisted Extraction of Xylan

    … Current process of extraction involves prolonged heating of the biomass with the hydrolysis media at high temperature and/or pressure that leads to molecular degradation of xylan and limits its high potential polymeric applications. In this research, microwave assisted alkaline extraction of …

    toronto-retro Repository record for Microwave Assisted Extraction of Xylan (opens in a new tab)

Page 1 of 2