Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"selenization"”.
-
Optimization of CuInxGa1-xSe2 Solar Cells with Post Selenization
… normal to the direction of selenium flux. Our selenization results show that the CuInxGa1-xSe2 device performance can be optimized by tuning the Cu/In composition. An increase in Se flux facilitates In2Se3 and Ga2Se3 phases, resulting in CuInxGa1-xSe2 films with larger grains, and better device …
-
HIGH EFFICIENCY CIS SOLAR CELLS BY A SIMPLE TWO-STEP SELENIZATION PROCESS AND WAVEGUIDE BRAGG GRATINGS IN INTEGRATED PHOTONICS
Part I: High Efficiency CIS Solar Cells with Simple Fabrication Method CIS has a very high optical absorption coefficient, which makes it able to absorb more than 90% of the incident photons with energies higher than 1.04 eV within 1-2 µm thickness. Because of the high absorption coefficient and …
-
Synthesis, deposition, and microstructure development of thin films formed by sulfidation and selenization of copper zinc tin sulfide nanocrystals
… and in the thermodynamics involved during selenization and sulfidation of CZTS colloidal nanocrystal coatings to form CZTSSe or CZTS thin films, respectively. To understand these differences, the roles of vapor pressure, annealing temperature, and heating rate in the formation of different …
-
Fabrication of Cu<sub>2</sub>ZnSnSe<sub>4</sub> Thin-film Solar Cells by a Two-stage Process
… CZTSe absorber fabrication are: tin loss during selenization process and existence of secondary phases. Recent improvements of CZTSe absorber have increased the efficiency of CZTSe thin film solar cell to 9.7% in laboratory, and this was accomplished by using H2Se as selenium source in a …
-
Sintering of Cu(In,Ga)Se2 nanocrystal films for photovoltaics
… Two sintering methods are investigated here: selenization and photonic curing. The nanocrystal films can be sintered by annealing the films in a Se environment, also known as selenization. The selenized device morphology and efficiency is influenced by the starting nanocrystal composition. A …
-
In situ investigation of the rapid thermal reaction of Cu-In-Ga precursors to Cu(In,Ga)Se2 thin-film solar cell absorbers
… is then heated in Se vapor to form a CIGS layer (selenization) within minutes. However, sequential processing typically leads to Ga segregation at the back contact. The observed Ga segregation inhibits the adjustment of the effective band gap energy to achieve more efficient solar cells. Up to …
-
Photovoltaic devices based on Cu(In1-xGax)Se2 nanocrystal inks
… amounts of selenium vapor. The process of selenization, as it is called, took place at 500°C in a graphite box and led to an increase of the grain size from 15 nm to several microns in diameter. Devices with the increased grain size yielded efficiencies up to 5.1% under AM1.5 radiation. …
-
Synthesis and Reactivity of Electroactive Carbon Sulfide Ligands and Studies on Modifications of Nucleic Acids
Finally, a separate study into the selective selenization of nucleic acid oligonucleotides was pursued. By using the soluble Se-transfer agent (i-PrC5H4)2TiSe5 in a new method with solid-phase phosphoramidite oligonucleotide synthesis, a mono-, di-, tri-, and tridecanucleotide of DNA with one …
-
Effect of Heat Treatments and Reduced Absorber Layer Thickness on Cu(In,Ga)Se2 Thin Film Solar Cells
… and Selenium. In the second stage, designated as selenization, the substrate is annealed at high temperatures in a selenium environment during which a thin layer of copper is also deposited. The typical thickness of the absorber layers fabricated by this process is around 2µm. The ZnO transparent …
-
Research project to study cadmium selenide (CdSe) solar cells
… Chloride (CdCl2) treatment and Post-deposition selenization to improve the electrical properties of CdSe thin films. CdCl2 activation process is a vital step which reduces the density of mid-gap states inside the bandgap and helps to obtain recrystallization, grain-growth and passivation of …
-
Kesterite thin-film solar cell absorbers derived using inhomogeneous CZTS nanoparticles
… lamellae to study CZTSSe film formation during selenization. It is found that the compositionally inhomogeneous nanoparticles supply the metal cations – namely Cu, Zn, and Sn – to the CZTSSe nuclei that grow at the top surface of the nanoparticle layer. These CZTSSe grains form a continuous …
-
STUDY OF SELENIUM-BASED TRANSITIONAL METAL CHALCOGENIDES
… growth methods (CVT, mechanical exfoliation, selenization, and MBE) suitable for 2D PtSe2 device.
-
Formation of chalcogenide solar cell absorber layers using electrochemical deposition of precursors /
… printer. Also, the conditions of sulfurization/selenization of the precursor layers were investigated. The phase composition and photoelectrochemical activity of the formed CTSe layers were investigated. The formed CZTS absorber layers were characterized using SEM, TEM, EDX, Raman spectroscopy, …
-
Elektrocheminis Cu-Zn-Sn pirmtako nusodinimas ir Cu2ZnSnSe4 saulės elemento formavimas /
… The influence of initial CZT composition and selenization conditions (temperature, duration, amount of Se) on the CZTSe morphology, phase composition and CZTSe solar cell performance has been investigated. Cu-poor, Zn-rich composition and preheating of CZT precursor was necessary to obtain …
-
Electrochemical deposition of Cu-Zn-Sn precursor and formation of Cu2ZnSnSe4 solar cell /
… The influence of initial CZT composition and selenization conditions (temperature, duration, amount of Se) on the CZTSe morphology, phase composition and CZTSe solar cell performance has been investigated. Cu-poor, Zn-rich composition and preheating of CZT precursor was necessary to obtain …
-
Growth, Characterization and Simulation of Tungsten Selenide Thin Films for Photovoltaic Applications
… of WSe2 films has been studied. By means of selenization of tungsten films in a closed tube in a single-zone furnace, highly c-axis orientated P-type WSe2 thin films with a large carrier mobility have been grown. In the second part, multiple sets of simulations of the WSe2 solar cell devices …
-
Preparation And Characterization Of Cigss Solar Cells And Pv Module Data Analysis
… motor control for better uniformity. Further, selenization/ sulfurization of these precursors was carried out using rapid thermal processing (RTP). CIGS films were sulfurized using chemical bath deposition (CBD). ZnO:Al was deposited on the CIGSS films using RF sputtering. A separate LABVIEW …
-
Fabrication and Characterization of Novel 2SSS CIGS Thin Film Solar Cells for Large-Scale Manufacturing
A novel 2SSS (2 Step Solid Selenization) CIGS (Cu, In, Ga, Se) thin film solar cell recipe was developed which can be a replacement to the conventional co-deposition process usually employed for large-scale manufacturing. The co-deposition procedure is faced with multiple problems such as selenium …
-
Growth and Characterization of Wide Bandgap CIAGS Solar Cell Material and Devices
… (contact resistance). A TiN diffusion barrier to selenization improves the CIAGS/Mo interfacial adhesion and provides a potential solution to the delamination problem in the wide bandgap absorbers such as CIAGS.
-
Processing And Characterization Of CIGS - Based Solar Cells
… at 275oC followed by a high temperature selenization step. The advantage of the 2 stage process is that it is manufacturing friendly. The first step in fabrication of solar cells is to clean the substrate which is necessary to obtain good device performance. A variety of environmentally …
Page 1 of 3