Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"self locking"”.
-
Frictional Behaviour of Coated Self-locking Aerospace Fasteners
… is applied to the nut, in order to provide a self-locking feature preventing vibration self-loosening. In this study, the CoF of the thread contact will be investigated both during initial joint assembly, and after thermal ageing. Additionally, a finite element model will be employed to …
-
Desing of self-locking planetary gear trains for reahbilitation engineering and mobility devices.
… subject. The device is fully mechanical and can self-lock under any knee flexion angle. The main component of the system is a Planetary Gear train (PGT) with self-locking capability. This permits the movement of the orthosis during the swing phase, and the locking of the device during the stance …
-
Origami-inspired honeycombs as energy absorbing materials
… novel design of origami-inspired honeycomb with self-locking and stiffness gradient was proposed. The design used the concept of Miura-ori pattern to create the unique Miura-ori honeycomb, with a core layer being at the middle sandwiched by two secondary flange layers. The self-locking feature …
-
Development of A Kinetic Model For Loop-Free Colonoscopy Technology
… The following conclusions then are made: (1) self-locking of the colonoscope is the most basic cause for a loop to occur, while structural instability of the colonsocope is dependent on the self-locking; (2) both the scope and the colon can be well represented with the Timoshenko beam elements …
-
Incorporating Stability in Deployable Origami-based Engineering Applications
… use in origami-based design. The application of self-deploying, self-locking ThUDS in an origami-based CubeSat reflectarray is shown, designed using optimization principles. Last, various multistable furniture concepts are presented, with stability incorporated into the concept design. These …
-
Origami structures based on rigidly foldable tessellation patterns
… crease-stackable with each other, resulting in self-locking stacked OCTs.</p> <p>Third, the modular origami horn chain, MOHC, and the modular origami claw chain, MOCC, are proposed. Both are flat-foldable, rigidly foldable, and crease-stackable. These origami tessellations match the shape of a …
-
Design optimization of structures with path-dependent and non-linear material behavior
… mechanical response,plastic work maximization, self-locking behavior, and stiffness optimization.
-
Control and Gait generation of a 3D biped robot in Gazebo
… to the human muscle-tendon system, including non-self-locking, torque-controllable mechanisms with parallel elasticity and minimal friction. The effectiveness of the approach is validated through simulations of 3D dynamic walking, revealing an efficient, smooth, and rapid gait capable of handling …
-
Comparison of the primary stability and seating force of two uncemented cup designs used for total hip replacement
… other being peripherally enhanced (peripheral self-locking - PSL). The cups were seated in reamed polyethylene bone substrate of low (0.22g/cm3) and high (0.45g/cm3) density, mimicking two qualities of bone (softer and harder). The primary stability of each design was investigated by recording …
-
Towards Magneto-Acoustic Oscillators
… spin torque oscillators in a PLL and injection locking of spin torque oscillators has been demonstrated. However, these solutions need an external signal reference for their implementation. Recently, self-locking of spin torque oscillators to their amplified, delayed output signal has been …
-
Torque split between left and right drive shaft over a front wheel drive differential
… are not only the differential (friction, self locking effect, Torsen differential), but also the input from the ground and car geometry such as road conditions (friction and surface), the vehicle state (cornering, rolling, acceleration) and weight distribution (loading). In addition, the …
-
Nonlinear analysis of compliant deployable structures: modelling, simulation and experimental validation
… dynamic analyses, which are characterised by a self-locking of the tape springs in their final deployed configuration. In order to accurately capture these phenomena, the importance of a suitable representation of the physical structural dissipation in the model is demonstrated and, for metallic …
-
Particle-scale study of spout deflection in spouted beds by CFD-DEM modelling and experiments
… for the deflection amplitude because of the self-locking phenomenon in the bottom corner. Large W promotes the regularity of the alternating spout deflection while the effects of H0 on its regularity in the investigated range is neglectable. In addition, the main frequency of the alternating …
-
Samozajišťovací mechanismus pro přepravu betonových sloupů
Tato práce se zabývá problematikou zajištění a následného transportu břemena (betonového sloupu) o zadaných parametrech. Cílem je navrhnout vhodnou funkční kinematiku samozajišťovacího mechanizmu pro uchycení sloupu. Dále je zpracováno konstrukční řešení obsahující funkční i pevnostní výpočty …
-
Rapid adiabatic devices enabling integrated electronic-photonic quantum systems on chip
… electronics to clean the input pump laser, a self-locking source ring with integrated electronic circuits that allow the ring resonance to automatically align to the pump laser and low-loss, high extinction, high-order thermally tunable filters. These results taken together show that …
-
Diferenciální kladkostroj
Tato bakalářská práce se zabývá návrhem a výpočtem samosvorného diferenciálního kladkostroje s ručním pohonem. Maximální nosnost je 670kg a výška zdvihu 5200mm. Práce obsahuje vývoj diferenciálního kladkostroje a popis konstrukce Westonova diferenciálního kladkostroje. Dále teoretický výpočet a …
-
Friction-induced Vibration in Lead Screw Systems
… instability mechanisms can only occur in self-locking lead screws. The experimental case study presented in this work demonstrates the need for active vibration control when eliminating vibration by design fails or when it is not feasible. Using the sliding mode control method, two speed …
-
Diferenciály automobilů
Tato bakalářská práce pojednává o diferenciálech automobilů. Cílem bylo vytvořit přehled různých typů diferenciálů, především těch samosvorných. První kapitola se věnuje převodovému ústrojí, kterého je diferenciál součástí. Druhá kapitola je o funkci diferenciálu. V třetí, nejobsáhlejší kapitole je …
-
Diferenciální kladkostroj
Tato bakalářské práce má za cíl sestavit návrh a provést funkční výpočet diferenciálního kladkostroje s posouzením mezí bezpečnosti a samosvornosti. Zadanými parametry jsou nosnost 200 kg a zdvih 5 metrů. Důležitým požadavkem je samosvornost a zohlednění ruční obsluhy.
-
Graded origami honeycomb for energy absorption
… connection methods. Techniques to introduce self-locking, through the restriction of the kinematic range, in the in- plane and out-of-plane direction were then highlighted. When grading in the out-of-plane direction, the Miura-ori facet width, a, was found to be dependent on the Miura-ori …
Page 1 of 3