Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"separated shear layer"”.
-
Transitory control of separated shear layer using impulsive jet actuation
… transitory 2- and 3-D attachment of the separated flow over a 2-D airfoil model are investigated in wind tunnel experiments. Pulsed actuation is effected on time scales that are an order of magnitude shorter than the characteristic convective time scale of the base flow by momentary jets …
-
Flow-induced sound and vibration due to the separated shear layer in backward-facing step and cavity configurations
… flow oscillations due to coupling between separated shear layers and standing acoustic waves. Experimental investigation of acoustically-coupled flows was conducted using digital particle image velocimetry (DPIV) in conjunction with unsteady pressure measurements. Global instantaneous, …
-
Subsonic open cavity flows and their control using steady jets
… field and the oscillations of the cavity separated shear layer. The purpose of the steady jets is suppressing the oscillations of the cavity separated shear layer. The experiments were performed for an open cavity with L/D = 4 at Reθ between 1.28×103 to 4.37×103. The steady jets were …
-
Investing Flow over an Airfoil at Low Reynolds Numbers Using Novel Time-Resolved Surface Pressure Measurements
… to estimate salient flow characteristics in the separated flow region over the upper surface of an airfoil. The flow development over the airfoil was examined using hot wire anemometry and mean surface pressure for a range of Reynolds numbers from 80x103 to 200x103 and angles of attack from 0° to …
-
Conditionally Analyzed Mean Velocity and Turbulence Measurements in a Plume-Induced Boundary Layer Separated Flowfield
… (which both peak near reattachment), the primary shear stress, and the normal stress anisotropy. The shock-separated shear layer consists of only a single layer with a large initial growth rate followed by a much smaller growth rate, instead of the two layers found in rapidly expanded shear …
-
The Later Stages of Transition over a NACA0018 Airfoil at a Low Reynolds Number
The later stages of separated shear layer transition within separation bubbles developing over a NACA0018 airfoil operating at a chord Reynolds number of 105 and at angles of attack of 0, 5, 8, and 10 degrees were investigated experimentally in a wind tunnel. Several experimental tools, including a …
-
Separation control on a NACA 0025 Airfoil Wing Using An Array of Synthetic Jets
… wake of the airfoil and vortex roll-up in the separated shear layer. The effects of forcing parameters, including excitation frequency, momentum coefficient, and chordwise forcing location, were investigated through wind tunnel experiments. The results showed that the microblower array …
-
Effects of aspect ratio on flow characteristics on free surface-mounted rectangular cylinders
… flow behaviors for different aspect ratios. The separated shear layer is shed directly into the wake for AR1, while AR2 and AR2.5 exhibits intermittent reattachment on the cylinder and direct shedding into the wake. However, for AR ≥ 3 cylinders, the separated shear layer reattaches onto the …
-
Measurements and Visualizations of a Three-Dimensional Compressible Base Flow
… discontinuity, a base-edge expansion fan, a separated shear layer, an asymmetric recirculation region, and a turbulent wake. A strong secondary circumferential flow, which develops along the afterbody due to pressure gradients on its surface, results in the entertainment of fluid into the …
-
Reynolds number effects on turbulent wakes generated by rectangular cylinders with streamwise aspect ratios between 1 to 4
… aspect ratio and Reynolds number on the separated shear layer and near wake of rectangular cylinders in uniform flow are investigated experimentally using a particle image velocimetry system. Four length-to-height ratios (AR = 1, 2, 3 and 4) are examined at Reynolds numbers (based on …
-
FLOW SEPARATION IN ROTATING CHANNELS
… these two rates are examined. The bump and the separated flow are under the anti-cyclonic effects of the Coriolis force when the rotation rate is positive, or cyclonic stabilization when the rotation is negative. When positive rotation unstabilizes the boundary layer, the separation on the bump …
-
Investigation of Synthetic Jet Flow Control Parameters for the Mitigation of Laminar Boundary Layer Separation
… forcing parameters on the mitigation of boundary layer separation on an airfoil at low Reynolds number. Post- stall flow at a Reynolds number of 100,000 and angle-of-attack 12 degrees on a NACA 0025 airfoil served as the baseline for control with a synthetic jet actuator. This baseline flow is …
-
ROLE OF THE SHEAR LAYER IN SHOCK-WAVE/TURBULENT BOUNDARY-LAYER INTERACTION: SWEPT SEPARATION STUDIES
… experimental investigation into the role of the separated shear layer as a key driver of shock-wave/turbulent-boundary-layer interaction unsteadiness. The early stages of the study look into the unsteadiness of a large-scale swept separation over a reference axisymmetric base flow, based on …
-
The Effect of Inlet Conditions on the Turbulent Wake of a Surface Mounted Fence
… the Kelvin-Helmholtz instability in the separated shear layer and a 'shedding-type' instability which affects the entire recirculation region. In this study, two δ/h ratios are investigated while maintaining the same Reynolds number. It was hypothesized that the δ/h ratio affects the …
-
Iced Airfoil Separation Bubble Measurements by Particle Image Velocimetry
… revealed accelerated transition of the separated shear layer emanating from a three-dimensional ice simulation and therefore enhanced pressure recovery and reduced mean separation bubble length, each relative to the flowfield of a representative two-dimensional ice simulation. These …
-
Three-dimensional turbulence mechanisms in a supersonic separated/reattaching longitudinal cylinder wake
… in the immediate vicinity of reattachment of the separated shear layer, as these mechanisms are the main drivers of critical flow properties, such as the low pressure in the separated region. This work was experiment-based, utilizing non-intrusive optical measurement techniques, including …
-
Effects of pressure gradient on two-dimensional separated and reattached turbulent flows
… is designed to study the salient features of separated and reattached flows in pressure gradients generated in asymmetric diverging and converging channels. The channels comprised a straight flat floor and a curved roof that was preceded and followed by straight parallel walls. Reference …
-
An examination of ground effect phenomena and the development of ground effect induced flow separation on a downforce generating wing
… cannot supply kinetic energy to the boundary layer. This form of separation was found not to be due to an excessive adverse pressure gradient, as often thought. The sudden form of separation is associated with the eventual inability of the separated shear layer to reattach. This was caused by …
-
Experimental Investigation of Transition over a NACA 0018 Airfoil at a Low Reynolds Number
Shear layer development over a NACA 0018 airfoil at a chord Reynolds number of 100,000 was investigated experimentally. The effects of experimental setup and analysis tools on the results were also examined. The sensitivity of linear stability predictions for measured separated shear layer velocity …
-
Effect of freestream turbulence on flow structure around slanted-back Ahmed body
… FST shortened the roof bubble through earlier shear-layer reattachment, whereas wake length remained unchanged. Over the RL slant, bubble size increased with FST up to 10% before stabilizing, linked to stronger interactions between the C-pillar vortex and the separated shear layer. Turbulence …
Page 1 of 3