Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 74 for “"serrations"”.

  1. Aerodynamic and Wake Development of Aerofoils with Trailing-Edge Serrations

    … fitted with different types of trailing-edge serrations is provided. A symmetric NACA 0012 and a cambered NACA 65(12)-10 aerofoils have been studied experimentally. The aerodynamic force measurements have shown that the use of trailing-edge serrations can lead to significant reduction of the …

    bristol Repository record for Aerodynamic and Wake Development of Aerofoils with Trailing-Edge Serrations (opens in a new tab) Download PDF for Aerodynamic and Wake Development of Aerofoils with Trailing-Edge Serrations (opens in a new tab)

  2. On the Aerodynamics of Trailing Edge Serrations at Low Reynolds Numbers

    … including wavelength, amplitude, and shape of serrations. Five serration shapes were used, all with a thin flat plate as a baseline profile: (i) blunt, (ii) triangular, (iii) quadratic bird feather-like, (iv) quadratic membrane-like, and (v) quadratic membrane-like with tapering. Trailing edge …

    washington Repository record for On the Aerodynamics of Trailing Edge Serrations at Low Reynolds Numbers (opens in a new tab)

  3. Investigation of biomimetic fish scale arrays and leading-edge serrations on base flow modification for transition delay

    … by fish scale arrays and the leadingedge serrations have been investigated in this work. Both geometries modify the base flow to be more stable and less susceptible to fundamental fluid instability, namely the Tollmien-Schlichting wave and the cross flow vortices. Biomimetic fish scale …

    city-london Download PDF for Investigation of biomimetic fish scale arrays and leading-edge serrations on base flow modification for transition delay (opens in a new tab)

  4. Impact of ground plane serrations on radiation and impedance characteristics of a slot antenna over a conductive back plane

    … by treating the edge of the ground plane with serrations. Our primary goal is to show the design trade-offs between bandwidth and thickness for the conductor-backed, serrated slot antenna. In our analysis we use simulations which we validate through measurements. Two bandwidth measures, …

    uiuc Repository record for Impact of ground plane serrations on radiation and impedance characteristics of a slot antenna over a conductive back plane (opens in a new tab)

  5. Airfoil noise reduction by edge treatments

    … Project FLOCON. This thesis focuses on sawtooth serrations and a detailed study is conducted in which thirty seven sawtooth trailing edges are tested for reducing the noise at various flow velocities and angles of attack. Broadband noise reductions of up to 5 dB are obtained below some critical …

    soton Download PDF for Airfoil noise reduction by edge treatments (opens in a new tab)

  6. Experimental and Numerical Investigation of Bio-Inspired Airfoil Trailing-Edge Designs for Noise Reduction

    … Various designs, such as standard sawtooth serrations, surface finlets, finned serrations and slanted-root sawtooth serrations are studied and compared. The different designs are shown to leverage different noise-suppressing flow mechanisms. The effects of changing standard serration …

    carleton Repository record for Experimental and Numerical Investigation of Bio-Inspired Airfoil Trailing-Edge Designs for Noise Reduction (opens in a new tab)

  7. Nature-inspired morphing wing technology for aerodynamic and acoustic improvements

    … the tip vortex with the addition of leading edge serrations and slotted wingtips. The leading edge serrations are inspired from those found on an owl’s wing which are complex 3D geometries that protrude from the leading edge. And the slotted wingtip is formed of extensions that extend out of the …

    city-london Download PDF for Nature-inspired morphing wing technology for aerodynamic and acoustic improvements (opens in a new tab) Embargoed until 2029-09-30

  8. Understanding the Impact of a Serrated Trailing Edge on the Unsteady Hydrodynamic Field

    … have shown that a trailing edge with sawtooth serrations can reduce trailing edge noise compared to a straight trailing edge, but the mechanism by which sawtooth serrations reduce noise is not fully understood. Previous theoretical models have assumed that the turbulence field convecting past a …

    vt Repository record for Understanding the Impact of a Serrated Trailing Edge on the Unsteady Hydrodynamic Field (opens in a new tab)

  9. Aerodynamic and Aeroacoustic Performance of Bio-inspired Flapping Wings

    … as well as the effects of passive (trailing edge serrations, winglets, wingtip serrations) and active control (trailing edge flap motion). For a rectangular wing undergoing pitching and stroke motions in hovering flight at a Reynolds number (Re) of 310, results show that trailing edge serrations …

    unsw Repository record for Aerodynamic and Aeroacoustic Performance of Bio-inspired Flapping Wings (opens in a new tab)

  10. Radiation in the genus Amazilia: A comparative approach to understanding the diversification of hummingbirds.

    … Then I narrate the discovery of bill serrations among 28 hummingbird genera (Chapter 2), and hypothesized that these structures aid in nectar-robbing of long-tubed corollas. I test this hypothesis and found that the association between nectar-robbing and bill serrations evolved several …

    arizona-thes Repository record for Radiation in the genus Amazilia: A comparative approach to understanding the diversification of hummingbirds. (opens in a new tab)

  11. Low-order methodology for the design of propellers with serrated trailing edges

    … reduced by employing bio-inspired trailing edge serrations. The high computational cost of high-fidelity CFD simulations put them at the end of the design cycle rather than at the beginning. Therefore, propeller designers need a fast method for predicting noise reductions. Analytical models for …

    ets-quebec Download PDF for Low-order methodology for the design of propellers with serrated trailing edges (opens in a new tab)

  12. Tensile deformation, corrosion and crack-growth characterization of a nickel-base alloy

    … C-22 exhibited reduced failure strain (ef) and serrations under tensile loading within susceptible temperature regimes, indicating the occurrence of dynamic-strain-aging (DSA) phenomenon. A maximum dislocation density was observed at 600°C at which the lowest ef was noted. An average …

    unlv Repository record for Tensile deformation, corrosion and crack-growth characterization of a nickel-base alloy (opens in a new tab) Download PDF for Tensile deformation, corrosion and crack-growth characterization of a nickel-base alloy (opens in a new tab)

  13. Study of Effects of Design Modification in Static Mixer Geometry and its Applications.

    … of varying sizes and different shapes of serrations were introduced to the static mixer blades using AutoCAD software. These modified static mixer geometries include perforated SMX with 2 holes of D/20 size on each blade, perforated SMX with 4 holes of D/20 size on each blade, perforated …

    waterloo Repository record for Study of Effects of Design Modification in Static Mixer Geometry and its Applications. (opens in a new tab)

  14. Experimental Wind Tunnel Testing and Numerical Optimization Studies for Airfoil Trailing Edge Noise Reduction

    … NACA-0012 airfoil, and flat-plate trailing-edge serrations are investigated. A wind tunnel test section that provides the required environment is designed and created. The test section walls have been acoustically treated to simulate an acoustically far-field environment with forwarding flight. …

    carleton Repository record for Experimental Wind Tunnel Testing and Numerical Optimization Studies for Airfoil Trailing Edge Noise Reduction (opens in a new tab)

  15. Aerofoil geometry effects on turbulence interaction noise

    … study into the limitations of single-wavelength serrations in reducing interaction noise. The optimum profile is identified. Chapters 5, 6 and 7 all deal with the development of innovative profiles that can provide up to 10dB of additional noise reductions compared to single-wavelength serrations. …

    soton Download PDF for Aerofoil geometry effects on turbulence interaction noise (opens in a new tab)

  16. Analysis and design of planar slot antennas for RFID applications using characteristic mode theory

    … In addition, edge treatment in the form of serrations can be used to improve the bandwidth and radiation properties of thin planar antennas. Although serrations offer a simple technique to improve radiation characteristics of a microstrip antenna, there are no design guidelines or analytical …

    uiuc Repository record for Analysis and design of planar slot antennas for RFID applications using characteristic mode theory (opens in a new tab)

  17. Modifications of Coherent Structures in Fan Blade Wakes for Broadband Noise Reduction

    … of streamwise vorticity. In almost all cases the serrations reduce the spanwise and streamwise turbulence scales. Serrations do not, however, affect the apparent time scale of quasi-periodic structures in the wake, and this appears to limit the potential of this trailing edge treatment to reduce …

    vt Repository record for Modifications of Coherent Structures in Fan Blade Wakes for Broadband Noise Reduction (opens in a new tab)

  18. Parent Material Surface Deposits Origin in Finish Turning Operations of the Powder Processed Nickel Based Superalloy RR1000

    … linked to the fracture of primary and secondary serrations forming at the chip’s trailing edge, whilst it was found that the selection of machining parameters and the workpiece ductility performance were key factors for influencing pick-up severity.

    whiterose Download PDF for Parent Material Surface Deposits Origin in Finish Turning Operations of the Powder Processed Nickel Based Superalloy RR1000 (opens in a new tab)

  19. Provenance tests of loblolly pine (Pinus taeda L.) in Tennessee

    … present in three provenance tests for number of serrations per centimeter with the highest frequency of serrations being from trees of inland sources and the lowest from trees of Coastal Plain sources. Statistically significant differences among sources were obtained only in those provenance …

    ut-knoxville Repository record for Provenance tests of loblolly pine (Pinus taeda L.) in Tennessee (opens in a new tab)

  20. An embedded IoT antenna for smart pavement monitoring system

    … and measurement results show that with serrations on the ground plane, the proposed antenna is able provide broadside gain of 3.4 dB through asphalt pavement.

    uiuc Repository record for An embedded IoT antenna for smart pavement monitoring system (opens in a new tab)

Page 1 of 4