Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"shape memory alloy wires"”.

  1. Stucture and thermomechanical behavior of nitipt shape memory alloy wires

    … at% Pt). Structural characterization of the alloy includes grain size determination and texture analysis while the thermo-mechanical properties are explored using tensile testing. Variation in heat treatment is used as a vehicle to modify microstructure. The results are compared to …

    gatech Repository record for Stucture and thermomechanical behavior of nitipt shape memory alloy wires (opens in a new tab)

  2. Performance of Steel Braced Frame Reinforced with Shape Memory Alloy Wires

    Shape memory alloys have just recently made their way into structural design, and through studies have proved to be quite effective in increasing a structure’s strength and performance. This thesis focuses on the research performed on concentrically braced steel frames reinforced with …

    calgary Repository record for Performance of Steel Braced Frame Reinforced with Shape Memory Alloy Wires (opens in a new tab)

  3. A nonlinear thermodynamic model for phase transitions in shape memory alloy wires

    … computational model of the physical behavior of shape memory alloy wires, this study shows that localized heating and cooling of such materials provides an effective means of damping vibrational energy. The thermally induced pseudo-elastic behavior of a shape memory wire is modeled using a …

    rice Repository record for A nonlinear thermodynamic model for phase transitions in shape memory alloy wires (opens in a new tab)

  4. Electrical Resistance and Natural Convection Heat Transfer Modeling of Shape Memory Alloy Wires

    Shape memory alloy (SMA) wires are becoming increasingly popular as actuators in automotive applications due to properties such as large recovery strain, low weight, and silent actuation. The length change and thus actuation in SMA wires occur when the wire is heated, usually by passing a direct …

    waterloo Repository record for Electrical Resistance and Natural Convection Heat Transfer Modeling of Shape Memory Alloy Wires (opens in a new tab)

  5. Performance of Eccentrically Loaded Reinforced Concrete Columns Confined with Shape Memory Alloy Wires

    Smart materials such as Shape Memory Alloys (SMA) are recently utilized for strengthening and repairing of concrete structures. The most common form of SMA wires used for concrete confinement applications is Nickle Titanium (NiTi) because it possesses unique thermo-mechanical properties such as the …

    calgary Repository record for Performance of Eccentrically Loaded Reinforced Concrete Columns Confined with Shape Memory Alloy Wires (opens in a new tab)

  6. Synchrotron Radiation X-Ray Diffraction of Nickel-Titanium Shape Memory Alloy Wires During Mechanical Deformation

    Shape memory alloys (SMAs) are a new generation material which exhibits unique nonlinear deformations due to a phase transformation which allows it to return to its original shape after removal of stress or a change in temperature. It shows a shape memory effect (martensitic condition) and …

    unt Repository record for Synchrotron Radiation X-Ray Diffraction of Nickel-Titanium Shape Memory Alloy Wires During Mechanical Deformation (opens in a new tab)

  7. Electromechanical Shape Memory Alloy Actuators for Blood Extraction

    … for diabetes. All the designs used contracting shape memory alloy wires, fixed geometry and millimetre-scale moving parts, primarily to extend a disposable lancet needle from the device and into the skin. The lancet was to enter the skin at an acute angle that increased to 90° at full extension, …

    calgary Repository record for Electromechanical Shape Memory Alloy Actuators for Blood Extraction (opens in a new tab)

  8. Design and evaluation of a shape memory alloy-based tendon-driven actuation system for biomimetic artificial fingers

    … of novel artificial muscle technology, namely, shape memory alloys. The mechanism developed is based on the combination of compliant tendon cables and one-way shape memory alloy wires that form a set of agonist–antagonist artificial muscle pairs for the required flexion/extension or …

    uvic Repository record for Design and evaluation of a shape memory alloy-based tendon-driven actuation system for biomimetic artificial fingers (opens in a new tab)

  9. The Development of Actuators for the Whole Skin Locomotion Robot

    … of actuators for such a motion is performed by a shape memory alloy composite actuator. Unlike a typical composite model which utilizes a homogenization of fiber and matrix properties our model is developed for line loads produced in individual shape memory alloy wires onto the rod structure. The …

    vt Repository record for The Development of Actuators for the Whole Skin Locomotion Robot (opens in a new tab)

  10. Starfish: A Compact, Biomimetic, and Adaptive Shape Memory Alloy Orbital Debris Remover

    … of a compact, biomimetic, and adaptive shape memory alloy actuated orbital debris remover. The design, referred to as Starfish, is discussed in detail along with its fabrication process and object capture ability. A hard skeleton crafted from PETG was combined with shape memory alloy …

    embry-riddle Repository record for Starfish: A Compact, Biomimetic, and Adaptive Shape Memory Alloy Orbital Debris Remover (opens in a new tab)

  11. Design and Fabrication of Origami Elements for use in a Folding Robot Structure

    … was used for the self-folding structure. The shape memory alloy wires in torsion (TSW) and bending (BSW) was used in an embedded actuation system. A unit cell of origami ball was fabricated as a self-folding element by using three approaches: manually, acrylic, and Kapton and 3D printing. It …

    whiterose Download PDF for Design and Fabrication of Origami Elements for use in a Folding Robot Structure (opens in a new tab)

  12. Neuro-fuzzy model of superelastic shape memory alloys with application to seismic engineering

    Shape memory alloys (SMAs) have recently attracted much attention as a smart material that can be used in passive protection systems such as energy dissipating devices and base isolation systems. For the purpose of investigating the potential use of SMAs in seismic engineering applications a soft …

    tamu Repository record for Neuro-fuzzy model of superelastic shape memory alloys with application to seismic engineering (opens in a new tab)

  13. 4D printing of smart co-extruded wire-fibre polymer composites

    … enables printed structures to change their shape, properties, or function over time in response to external stimuli. However, most demonstrated systems are limited to a single functional response, and integrating actuation with sensing in one printed structure remains an open challenge. This …

    aalto Repository record for 4D printing of smart co-extruded wire-fibre polymer composites (opens in a new tab)