Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"shear compression"”.
-
FINITE ELEMENT ANALYSIS OF MECHANICAL BEHAVIOR OF MECHANICAL COMPONENTS UNDER COMPRESSION
… and soft materials. Third, responses of cubic shear–compression models are analyzed numerically. A set of approximate analytical relations are determined to obtain effective stress and effective strain of the material from the displacements of the gauge section and reaction force. A universal …
-
Shear and Compression Strength of Cold-formed Steel Clip Angles Subjected to Different Screw Patterns
… angle in three different limit states which are shear, compression, and combination of the screw connection. A previous cold-formed steel clip angle test program (which is Phase 1) developed design methods for clip angle. Therefore, the object of this thesis is to further investigate the behavior …
-
The development of DAPPAM, a glass fibre cable bolt
… testing consisted of tensile, preliminary shear, compression, grout column and Instron testing in addition to observations through the use of the scanning electron microscope at the University of British Columbia. Additional laboratory testing was completed at the United States Bureau of …
-
Sker í steypu og samanburður á helstu hönnunaraðferðum skerbentra bita við raunverulegar skerprófanir
… staðlarnir beita þeim. Einnig er fjallað um Compression chord capacity líkan sem er nýtt líkan, birt 2016, til að meta skerstyrk bita. Fræðilegar niðurstöður skv. þessum aðferðum eru svo bornar saman við ACI-DAfStb skergagnagrunn með 89 skerbrotum einfalt undirstuddra bita. Í ljós kom að þær …
-
An analytical study and computer analysis of three-dimensional, steady-state vibration of multishaft geared-rotor systems
… the involute spur gear mesh based on bending, shear, compression, and local contact deformation; development of the mesh transfer matrix; development of an automatic system solver to allow the engineer to analyze systems of arbitrary construction; and the development of a matrix solver to …
-
Modelling, characterization and development of new magnetorheological elastomers with enhanced vibration control performance
… manufactured. The samples were tested under pure compression and combined shear/compression loading mode, using an inclined prototype isolator device, to examine the principal elastic axis stiffness <i>kp/kq</i> and damping ratio <i>cp/cq</i> . MR effect of dynamic stiffness is higher in pure …
-
Development of a split mold for internal consolidated undrained isotropic compression (CUIC) testing of low effective-stress soils from slurry
… material to be tested in triaxial shear compression with the application of a small confining pressure, and then consolidated and sheared as normal. Tests performed using this method have only been limited to mine tailings, sand, and dredged sludge, and has not been used to …
-
Adobe materials for structural walls
… be discussed. This includes material testing for shear, compression, and rupture properties and wallette elements undergoing four-point bending. Ninety-four mortar cubes of varying material makeup, age, and drying environments were tested in compression. It was found that controlled drying …
-
Displacement Capacity of Load-Bearing Masonry as a Basis for Seismic Design
… to reproduce the envelope curves of the cyclic shear-compression tests and it is able to interpret the performances of panels linking them with limit states resulting from integration of cross-section equilibrium equations. Finally, it was applied a model able to reproduce the hysteretic …
-
Equivalent Viscous Damping and Inelastic Displacement for Strengthened and Reinforced Masonry Walls
… From the experimental results obtained by cyclic shear-compression tests on different types of masonry panels, an analytical model has been developed, that allows to reproduce the in-plane behavior of both the tested types: one is modern reinforced masonry and the other is traditional multi-leaf …
-
Behavior of the cast-in-place splice regions of spliced I-girder bridges
… of both test girders were characterized by a shear-compression failure of the web concrete with primary crushing occurring in the vicinity of the top post-tensioning duct. Most significantly, the girders acted essentially as monolithic members in shear at failure. Web crushing extended across …
-
Behaviour of Shear Critical RC Beams with Corroded Longitudinal Steel Reinforcement
… the effect of corrosion on the behaviour of shear critical reinforced concrete (RC) beams. The results of twenty RC beams (ten deep beams and ten slender beams) are described and discussed. The test variables included: corrosion level (2.5%, 5% and 7.5%) and existence of stirrups (beams …
-
Laser Powder Bed Fusion of Shape Memory Alloy NiTi for Biomedical Applications
… loading direction (Y-GCSs) exhibited a similar shear compression failure behavior and slightly better fatigue behavior (i.e., longer fatigue life under high cycles) compared to the uniform structure. In contrast, GCSs with graded density parallel to the loading direction (Z-GCSs) exhibited a …
-
Analysis of fillet function in wood-based sandwich construction
… was subjected to tensile load, a vertical shear failure took place at the center of the fillet concave meniscus regardless of fillet size. By assuming the uniformity of fillet shape, the following equation: [symbol omitted]= my + d , was found to express the relationship between the …
-
DESIGN, MECHANICAL EXPERIMENTS AND MODELING ON A NEW FAMILY OF 3D PRINTED HYBRID CHIRAL MECHANICAL METAMATERIALS WITH NEGATIVE POISSON’S RATIO
… materials with increased indentation resistance, shear resistance, energy absorption capability and variable permeability. Chiral auxetic mechanical metamaterial is a sub-family of the auxetic material, which is with a geometry that is non-superposable on its mirror image. Compared to symmetric …
-
Impact of Hydrate Dissociation on the Stiffness and Strength of Hydrate Bearing Sands
… dissociation on the small-strain stiffness and shear strength of laboratory-synthesized methane hydrate-bearing sands. The excess gas method was employed to form methane hydrates within the sand specimens, simulating the conditions prevalent in many natural gas hydrate reservoirs. During hydrate …
-
THE EFFECTS OF PREBLENDING TIME ON SAUSAGE TEXTURE
… batter stability, processing yield (PY), Instron compression (CO) and protein solubilization increased from 0-16 hr. No differences were observed for EM, PY and CO and in SEM micrographs for the 48-240 hr interval. The effects of preblending on textural properties occur rapidly (0-16 hr), reach a …
-
IMPROVEMENT OF DYNAMIC PROPERTIES AND SEISMIC RESPONSE OF CLAY USING FIBER REINFORCEMENT
… static geotechnical properties of clay such as shear, compression, tensile strengths, and so on. These improvements have triggered great interest in the possibility of mixing fibers with clay to improve the clay's dynamic properties. Because the percentage of fibers is currently arbitrarily …
-
Composition-Dependent Mechanisms of Multiscale Tendon Mechanics
… under non-tensile loading modalities (i.e., shear, compression). This information is vital to explore mechanisms of how mechanical signals lead to changes in tendon structure and composition to enable these tissues to function properly, including in in vivo multiaxial loading conditions. From …
-
On the use of XFEM for frictional crack face contact. Application to rolling contact crack growth in rails
… the XFEM results in terms of resolved contact shear stresses are compared with the explicitly meshed fracture surface. Crack face friction is implemented using Coulomb’s model with varying friction coefficients, and the comparisons are conducted for pure shear load and combined …
Page 1 of 2