Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"shift factor"”.

  1. Topology control algorithms in power systems

    … for production cost reduction based on a shift factor (SF) representation of branch and breaker flows is proposed. The framework models topology changes endogenously while maintaining linearity in the overall Mixed Integer Linear Programming (MILP) formulation. This work develops the DC …

    bu Repository record for Topology control algorithms in power systems (opens in a new tab)

  2. Utilization of Instrument Response of SuperPaveTM Mixes at the Virginia Smart Road to Calibrate Laboratory Developed Fatigue Equations

    … typically accounted for by the use of a single shift factor based mainly on engineering experience. The flexible pavement portion of the Virginia Smart Road includes 12 different flexible pavement designs. Each section is approximately 100m long. The sections are instrumented with pressure …

    vt Repository record for Utilization of Instrument Response of SuperPaveTM Mixes at the Virginia Smart Road to Calibrate Laboratory Developed Fatigue Equations (opens in a new tab)

  3. Rheology of molten polystyrene with dissolved gases

    … decrease in viscosity. The composition-dependent shift factor scaling method, which is similar to classical viscoelastic scaling techniques (time-temperature superposition), was adopted in order to evaluate the effect of gas concentration on viscosity. The method successfully consolidates the …

    wayne-thes Repository record for Rheology of molten polystyrene with dissolved gases (opens in a new tab)

  4. Volume-induced stress response in amorphous polymers

    … considerable flexibility in adjusting the shift factor for the glassy state.</p> <p>The data of the present work came from measuring the stress build-up in a uniaxially constrained fiber, subjected to cooling rates varying from 0.08 to 3.2 <i>°C/sec</i>. The volume contraction was …

    ut-knoxville Repository record for Volume-induced stress response in amorphous polymers (opens in a new tab)

  5. A finite element analysis of adhesively bonded composite joints including geometric nonlinearity, nonlinear viscoelasticity, moisture diffusion and delayed failure

    … response is taken into account by a nonlinear shift factor definition. Penetrant sorption is accounted for by a nonlinear Fickean diffusion model in which the diffusion coefficient is dependent on the penetrant concentration and the dilatational strain. A delayed failure criterion based on the …

    vt Repository record for A finite element analysis of adhesively bonded composite joints including geometric nonlinearity, nonlinear viscoelasticity, moisture diffusion and delayed failure (opens in a new tab)

  6. Viscoelastic characterization of polyurea based polymers

    … in the form of Prony series. The thermal shift factor for bulk relaxation was fitted with the Arrhenius equation while for shear relaxation, the trend was fitted with the WLF equation. The nonlinear response at ambient conditions was predicted using the modified free volume model (Park et …

    texas Repository record for Viscoelastic characterization of polyurea based polymers (opens in a new tab) Restricted access

  7. Development of tension and compression creep models for wood using the time-temperature superposition principle

    … creep compliance for each temperature was shifted along the log-time axis to obtain a "master" curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that …

    vt Repository record for Development of tension and compression creep models for wood using the time-temperature superposition principle (opens in a new tab)

  8. Measuring and predicting sealant adhesion

    … humidity is less than 35%. The temperature shift factor was not related to the WLF theory but worked well with an Arrhenius theory. The activation energy for the fracture process was 31.2 kcal/mol. Crack growth data for an expansion joint was calculated for the weather conditions in Miami, …

    vt Repository record for Measuring and predicting sealant adhesion (opens in a new tab)

  9. Durability Performance Of Geopolymer Concrete Beams And Columns Exposed To Hygrothermal Environment

    … (WLF) equation was employed here to develop the shift factor for regular concrete and geo-polymer concrete exposed to different environmental conditions. The shift factors were determined empirically based on experimental test results. To confirm the validity of the analysis process and the …

    wayne-thes Repository record for Durability Performance Of Geopolymer Concrete Beams And Columns Exposed To Hygrothermal Environment (opens in a new tab)

  10. The Role of Penetrant Structure on the Transport and Mechanical Properties of a Thermoset Adhesive

    … variables. The concept of a diffusion-time shift factor (log aDt) has been introduced to create doubly-reduced master curves, taking into account the effects of temperature and the variations in the polymer mechanical response due to the existence of a low molecular weight penetrant.

    vt Repository record for The Role of Penetrant Structure on the Transport and Mechanical Properties of a Thermoset Adhesive (opens in a new tab)

  11. A measurement of complex viscosity with large amplitudes

    … and η only have similar shapes. η' and η can be shifted into coincidence along the γ - Ω axis with shift factor of 2. The dependence of complex viscosity on amplitude was investigated for the 5 g/dl PIB L-80 solution. Both η' and η" decrease with increasing amplitude when amplitude is beyond a …

    must-thes Repository record for A measurement of complex viscosity with large amplitudes (opens in a new tab)

  12. Modeling of the linear viscoelastic response of polymer modified asphalt binders at intermediate and high temperatures

    … engineering problems was presented. The measured shift factor data was used to study the dependency of the viscoelastic response on temperature variations. It was observed that this dependency is dominated by the asphalt phase. Within the studied range of temperatures, the WLF equation with …

    vt Repository record for Modeling of the linear viscoelastic response of polymer modified asphalt binders at intermediate and high temperatures (opens in a new tab)

  13. Predicting in-service fatigue life of flexible pavements based on accelerated pavement testing

    … pavement configurations, stress level related factors, new materials and design improvements. This type of testing closely simulates field conditions; however, it does not capture actual performance because of the limited ability to address long-term phenomena. The same pavement structure may …

    texas Repository record for Predicting in-service fatigue life of flexible pavements based on accelerated pavement testing (opens in a new tab)

  14. Creep behaviour of wood-plastic composites

    … Moreover, the temperature-stress hybrid shift factor and a modified WLF equation were studied; and, the parameters were successfully calibrated. Temperature-induced strain was observed in the results of the 220-day creep test. For a temperature-sensitive material like WPCs, the …

    ubc Repository record for Creep behaviour of wood-plastic composites (opens in a new tab) Download PDF for Creep behaviour of wood-plastic composites (opens in a new tab)

  15. GFRP Bars in Concrete toward Corrosion-free RC Structures: Bond Behavior, Characterization, and Long-term Durability Prediction

    … procedures using the Arrhenius law and time shift factor approach are developed to predict the long-term bond degradation over time. Besides, the machine learning techniques of the artificial neural network integrated with the genetic algorithm are used for bond strength prediction and …

    ndsu Repository record for GFRP Bars in Concrete toward Corrosion-free RC Structures: Bond Behavior, Characterization, and Long-term Durability Prediction (opens in a new tab)

  16. Adaptive Hierarchical Control in V2G Integrated Micro-grids

    … identification with a variable forgetting factor for system identification, and pole-shifting control with a variable pole-shift factor for control synthesis. In Part II of the thesis, an ANFIS based EMS is proposed for micro-grid energy management at the secondary level of the hierarchical …

    calgary Repository record for Adaptive Hierarchical Control in V2G Integrated Micro-grids (opens in a new tab)

  17. Wetlaid Cellulose Fiber-Thermoplastic Hybrid Composites - Effects of Lyocell and Steam Exploded Wood Fiber Blends

    … for PP and its composites. Comparison of shift factor versus temperature plots revealed decreasing relaxation times of PP with increasing lyocell concentration, which indicated that PP interacted better with lyocell than with SEW fibers. Finally, it was observed from sorption tests that …

    vt Repository record for Wetlaid Cellulose Fiber-Thermoplastic Hybrid Composites - Effects of Lyocell and Steam Exploded Wood Fiber Blends (opens in a new tab)

  18. Data-Driven Stealthy Injection Attacks on Smart Grid

    … grid nodes. To construct the LR-FDI attack, the Shift factor is estimated from measurement and LMP data. Finally, the impact of the attacks on the state estimation and the nodal energy prices is thoroughly investigated.

    unsw Repository record for Data-Driven Stealthy Injection Attacks on Smart Grid (opens in a new tab)

  19. The Effects of Structure, Humidity and Aging on the Mechanical Properties of Polymeric Ionomers for Fuel Cell Applications

    … isotherms were measured. A mastercurve and a shift factor plot were constructed for 60% sulfonated Dais® membrane. It was determined that an increase in the degree of sulfonation raised the glass transition temperature of these materials by facilitating the formation of the ionic clusters …

    vt Repository record for The Effects of Structure, Humidity and Aging on the Mechanical Properties of Polymeric Ionomers for Fuel Cell Applications (opens in a new tab)

Page 1 of 2