Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"shock mitigation"”.
-
Joint design for shock mitigation
… components that can be damaged by severe shock loads. Propagation of shock from the region of initial loading to the locations of critical components can result in their failure. The objective of the research is to mitigate (absorb/reflect/disrupt, etc.) the incident shock loading, …
-
Joint design for shock mitigation in vehicles
Propagation of ballistic shock from the region of impact to the locations of critical components can result in human injury and component failure in a combat vehicle, leading to reduced effectiveness of the vehicle and its crew. The armor joints of the ground vehicle can be designed to reduce these …
-
Adaptive Magnetorheological Seat Suspension for Shock Mitigation
… a seated occupant, and (3) control schemes for shock mitigation. A linear stroking semi-active magnetorheological energy absorber (MREA) was designed, fabricated and tested for intense impact conditions with piston velocities up to 8 m/s. MREA design was optimized on the basis of Bingham-plastic …
-
Experimental investigation of shock mitigation of electronic boards within projectile
… of the research is to better understand how shocks are transmitted to electronic boards and to investigate ways to mitigate these shocks. A projectile model is created to mimic an actual projectile. As projectiles are usually composed of threaded components, the effect of the tightening …
-
Experimental Analysis and Modeling Validation of A Knee Brace in Shock Mitigation
… developed for the lower extremities to study the mitigation of shock impact. A single degree of freedom machine is equipped with six linear induction motors to produce impact acceleration ranging from 0.5G to 4G. The experiments are carried out along the dummy leg by using two configurations, one …
-
Evaluation, Rating, and Numerical Modeling of a Shock Mitigation Seat for High-Speed Craft Based on Laboratory Single Impact Testing
… the HSC occupants to mechanical oscillations and shock pulses due to wave slam events. A wave slam is the violent impact between a waterborne craft and an incoming wave, and the shock created by the impact is the predominant cause of musculoskeletal injuries sustained by HSC operators and …
-
Implementation of a Drop Test Impact Rig for Dynamic Testing of High Speed Craft Shock Mitigation Seats and Extraction of Modal Parameters
… for testing seats in order to characterize their shock mitigating effectiveness by simulating the severe conditions of a slam impact at sea through the use of singular impact testing. Further, in order to identify the seats' dynamic parameters from drop test data, the Eigensystem Realization …
-
Analysis and mitigation of mechanical shock effects on high speed planing boats
… seas, exposes the occupants to severe mechanical shock exposure that has been linked to significant increase in the rates of acute and chronic injury. While many government and civilian organizations have researched various aspects of this problem over the past decade or more, no effective …
-
Modelling and Synthesis of High Speed Craft Acceleration Profiles
… characterized by vibration and repeated shock. Significant research has therefore been invested into HSC shock mitigation. The objective of this work was to determine standard shock acceleration profiles for HSC based on sea trial data. The knowledge of real-life sea inputs is important …
-
Experimental Studies of Flow-Structure Interactions in Blast/Shock-Driven Complex Flows
… encountered in various situations. As the blast/shock waves propagate, any object in its path can be damaged by the combination of significant compression behind the shock front and the subsequent complex flow-structure interactions. Insufficient protection from blast loads has led to a …
-
A COMPUTATIONAL INVESTIGATION FOR POTENTIAL IMPROVEMENTS
… copolymers, has been shown to be effective in shock mitigation. A combined Eulerian/Lagrangian transient nonlinear dynamics computational fluid/solid interaction analysis will be used to examine the effects of different polyurea augmentations (utilizing the polyurea in the suspension pads, as …
-
Structural characterization of polyurethane foam and implications of aging
Polyurethane (PU) foam is used as a shock mitigation material in the national stockpile, which degrades over time. A replacement foam, ReCrete was shown to exhibit acceptable mechanical properties after aging, but fractured with impact testing. Previously, processing ReCrete foam at elevated …
-
An Experimental Methodology for Characterizing High Speed Craft Seat Suspension Components
… the static and dynamic properties of Shock Mitigation Seats and their components. The composite procedure comprises static, friction, and dynamic tests. A user-friendly Component Testing Machine was designed and built by Carleton University's Applied Dynamics Laboratory to effectively …
-
The Effects of Controlled Porosity on the Dynamic Compression and Tensile Failure Strength of Additively Manufactured 316L Stainless Steel
… in materials can have marked effects on the shock wave propagation and the resulting tension-induced spall failure. Incorporating intentional heterogeneities in the form of micro-scale pores of controlled size and distribution can allow for a deeper investigation of their effects on shock …
-
Konceptframtagning av dubbelsätesanordning för höghastighetsbåtar
… specializes in the production and development of shock mitigating seats, designed for high-speed boat travel, with the main clientele being coastguards and naval institutions worldwide. Back injuries and fatigue are two of the main obstacles that must be cleared in this field, where weather …
-
Στοχαστική ανάλυση συστημάτων με γραμμικές και μη γραμμικές συσκευές ελέγχου ταλαντώσεων
… nonlinear passive control devices for vibration mitigation is investigated, considering uncertainty in either load or system parameters.In the first part of the thesis, the examined dynamic systems consist of the control device which is attached to a primary linear oscillator when subjected to a …
-
Simulation and Testing of Wave-Adaptive Modular Vessels
This study provides a comprehensive performance analysis of Wave-Adaptive Modular Vessels (WAM-V) using simulations and testing data. WAM-Vs are a new class of marine technology that build upon the advantages of lightweight, low-draft, catamaran construction. Independent suspensions above the hulls …
-
Magnetorheological Fluids and Applications to Adaptive Landing Gear for a Lightweight Helicopter
… landing gear damper to enable adaptive shock mitigation performance over a desired sink rate range. It was intended to maintain a constant stroking force of 17 793 N (4000 lbf) over a sink rate range of 1.8-7.9 m/s (6-26 ft/s), which is a substantial increase of the high-end of the sink …
-
An Investigation of Shock Propagation and Mitigation in Heterogeneous Media
The mitigation of shock waves in heterogeneous materials plays a crucial role in designing impact-resistant structures for aerospace, defence, and automotive industries. This research investigates the dynamic response of unidirectional carbon fibre-reinforced polymer (UD-CFRP) composites and …
-
Multi-body Dynamics Simulation and Analysis of Wave-adaptive Modular Vessels
Catamarans provide vast deck space, high thrust efficiency, and excellent transverse stability, however, in rough conditions they can be susceptible to deck slamming from head seas or bow diving in following seas and a pitch-roll coupling effect that can lead to uncomfortable corkscrew motion under …
Page 1 of 2