Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"shock testing"”.

  1. ANALYSIS OF A CIRCULAR RESONANT PLATE FOR SHOCK TESTING

    Designing a resonant plate for shock test specifications involves an understanding of how a system will respond with a given set of input and output locations in all three directions. To investigate how to effectively change the off-axis responses to meet test specifications, a finite element model …

    mtu Repository record for ANALYSIS OF A CIRCULAR RESONANT PLATE FOR SHOCK TESTING (opens in a new tab)

  2. Analytical and experimental investigation of overtesting during assembly-level shock testing Jean-Philippe Deblois.

    Mechanical shocks induced by the detonation of pyrotechnics ordnances are known to be highly detrimental to the integrity of spacecraft components. As a result, it is desirable to qualify these components as early as possible to prevent failures during launch. Assembly-level shock tests are usually …

    concordia Download PDF for Analytical and experimental investigation of overtesting during assembly-level shock testing Jean-Philippe Deblois. (opens in a new tab)

  3. CORRELATION OF AND DEVELOPMENT OF PROCEDURE TO USE A RESONANT PLATE WITH MECHANICAL EXCITATION FOR SHOCK TESTING SMALL-TO-MEDIUM SIZE SPACECRAFT AND PROVIDE AEROSPACE SHOCK ANALYSIS AND TESTING GUIDELINES

    … aerospace industry it is known that performing shock analysis and testing on spacecraft is difficult to do mostly because shock loads create a very short duration shock wave transient that can have high acceleration peak levels (1,000-5,000 g) and wide frequency content (100-10,000 Hz). FE …

    mtu Repository record for CORRELATION OF AND DEVELOPMENT OF PROCEDURE TO USE A RESONANT PLATE WITH MECHANICAL EXCITATION FOR SHOCK TESTING SMALL-TO-MEDIUM SIZE SPACECRAFT AND PROVIDE AEROSPACE SHOCK ANALYSIS AND TESTING GUIDELINES (opens in a new tab)

  4. Design and characterization of a shock and vibration mitigation seat system

    … development of pneumatic seatbladder systems for shock and vibration mitigation for use in current U.S military vehicle envelopes. This research expands on the previous work through an elaborate experimental characterization of four prototype air bladder seat cushion systems. The experimental …

    unlv Repository record for Design and characterization of a shock and vibration mitigation seat system (opens in a new tab) Download PDF for Design and characterization of a shock and vibration mitigation seat system (opens in a new tab)

  5. Improving the thermal shock resistance of silicon carbide ceramics

    … Ph.D. research has been to increase the thermal shock resistance of silicon carbide (SiC) based ceramics. Several applications utilize SiC in conditions generating thermal stresses, including but not limited to, heat exchangers, rocker nozzles, turbo charger rotors and combustion engine valves. …

    must-thes Repository record for Improving the thermal shock resistance of silicon carbide ceramics (opens in a new tab)

  6. The art of recoverying : benchmarking and identity salvaging among injured athletes

    … resources of "apocryphal assessment" and "shock testing" in order to interpret their pain and/or injury. In addition, the identity strategies of buffering, eclipsing and eulogizing are used by athletes to socially manage pain and injuries in their sports with regard to his/her role as …

    missouri Repository record for The art of recoverying : benchmarking and identity salvaging among injured athletes (opens in a new tab)

  7. New Carbon-Silicon Carbide Composite Board Material for High Density and High Reliability Packaging

    … structures were also simulated for thermal shock testing so as to assess via strains for microvia reliability. Via-pad misregistration was derived from the models and compared for different boards. Experiments were done to assemble flip-chips on boards without underfill followed by thermal …

    gatech Repository record for New Carbon-Silicon Carbide Composite Board Material for High Density and High Reliability Packaging (opens in a new tab)

  8. The damage assessment of thermally shocked high density, high purity aluminum oxide

    "The traditional approach to thermal shock testing in brittle materials has been to determine the temperature difference required to nucleate cracks in these materials. Recent work has indicated that the degree of damage after crack nucleation should be an additional consideration. The degree of …

    must-thes Repository record for The damage assessment of thermally shocked high density, high purity aluminum oxide (opens in a new tab)

  9. UPDATED APPROACH TO SHOCK FAILURE ASSESSMENT OF SHIPBOARD EQUIPMENT

    … underwater explosions that impart a mechanical shock onto the ship structure, its subsystems, equipment and crew. This violent shock loading, although not in direct contact with the ship hull, seeks to cause significant damage and even failure of critical components, potentially rendering vital …

    nps Repository record for UPDATED APPROACH TO SHOCK FAILURE ASSESSMENT OF SHIPBOARD EQUIPMENT (opens in a new tab)

  10. INVESTIGATION OF SUBMERGED CYLINDRICAL BODY RESPONSE TO SHOCK LOADING

    … near naval vessels is known to cause severe shock loading, which can have damaging effects on a submerged body due to fluid-structure interaction. Since necessary repairs are often complex, costly, and time consuming, shipbuilders and repair yards have an interest in being able to rapidly but …

    nps Repository record for INVESTIGATION OF SUBMERGED CYLINDRICAL BODY RESPONSE TO SHOCK LOADING (opens in a new tab)

  11. Microstructural Investigation of Solder Joint Failure in Heavy Duty Trucks

    … solder joints were investigated after thermal shock testing for 1000 and 2000 cycles, vibration testing, combined thermal cycling and vibration, and field service. The samples were characterized using polarized optical microscopy (POM), scanning electron microscopy (SEM), energy-dispersive …

    chalmers Repository record for Microstructural Investigation of Solder Joint Failure in Heavy Duty Trucks (opens in a new tab)

  12. The Effect of Package Types on Fresh Peaches in the Direct-To-Consumer Distribution Environment

    … cost to ship. We conclude that peach damage in shock testing is related to the freedom of movement that peaches have within each package type and is varied by package system. All the package types evaluated amplify input vibration in the frequency range commonly associated with the input from …

    clemson Repository record for The Effect of Package Types on Fresh Peaches in the Direct-To-Consumer Distribution Environment (opens in a new tab)

  13. Shock isolation performance of a negative stiffness honeycomb with an integrated fluid damping system

    In this thesis, the design, modeling, and shock testing of a monolithic curved beam negative stiffness honeycomb with an integrated air damping system is presented. The purpose of this research was to explore the potential to introduce one way damping into negative stiffness honeycombs by …

    texas Repository record for Shock isolation performance of a negative stiffness honeycomb with an integrated fluid damping system (opens in a new tab)

  14. Evaluation of systems containing negative stiffness elements for vibration and shock isolation

    … stiffness mechanisms for both vibration and shock isolation. The negative stiffness element studied in this research is an axially compressed beam. If a beam is axially compressed past a critical value, it becomes bistable with a region of negative stiffness in the transverse direction. By …

    texas Repository record for Evaluation of systems containing negative stiffness elements for vibration and shock isolation (opens in a new tab)

  15. Electron diffraction-based studies on the effects of complexity and order on the microstructural plastic response of multi-principal element alloys

    … strain-rate dependent behavior. Dynamic and shock testing on the Cantor alloy (equiatomic CoCrFeMnNi) and CoCrNi highlights the role that chemical disorder can play in modulating the mechanical response compared to conventional alloys. Finally, this research develops a technique for the …

    jhu Repository record for Electron diffraction-based studies on the effects of complexity and order on the microstructural plastic response of multi-principal element alloys (opens in a new tab)

  16. Cycling studies of micro-tubular solid oxide fuel cells

    … were observed. Lastly, thermal and electrical shock test were performed. The critical fracture temperature (ΔTC) was established by thermal shock at approximately 180⁰C. Under electrical shock testing, the tubes were found to fail after 13 – 15 electrical shock cycles, depending on the shock …

    birmingham Download PDF for Cycling studies of micro-tubular solid oxide fuel cells (opens in a new tab)

  17. Development of Cal Poly's Shock Table

    Shock is one of the environmental tests that a spacecraft must pass before being cleared for launch. Shock testing poses a challenging data acquisition issue and careful selection of equipment is crucial to creating a successful shock test facility. Cal Poly’s CubeSat programs can currently perform …

    calpoly Repository record for Development of Cal Poly's Shock Table (opens in a new tab)

  18. DROP DURABILITY ASSESSMENT OF ELECTRONIC ASSEMBLIES UNDER OFF-AXIS LOADING WITH SKEWED FIXTURES

    … and are conducted as a proxy for multiaxial drop testing. Advanced shock testing and vibration test methods have been developed over the last few decades to better represent real-world field environments during ground-based laboratory testing. However, many of these test methods require expensive …

    maryland Repository record for DROP DURABILITY ASSESSMENT OF ELECTRONIC ASSEMBLIES UNDER OFF-AXIS LOADING WITH SKEWED FIXTURES (opens in a new tab)

  19. Evaluating the performance of digital micromirror devices for use as programmable slit masks in multi-object spectrometers

    … calibration procedures and algorithms. Radiation testing to the levels of orbit around the second Lagrangian point (L2) was performed using the accelerated heavy-ion irradiation approach. The DMDs were found to be extremely reliable in such radiation environment, the devices did not experience …

    rit Repository record for Evaluating the performance of digital micromirror devices for use as programmable slit masks in multi-object spectrometers (opens in a new tab)

Page 1 of 2