Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"silver inks"”.

  1. Synthesis and patterning of reactive silver inks

    Silver inks are ubiquitous in printed electronic devices due to their high conductivity and oxidation resistance. However, many inks developed to date have numerous drawbacks such as difficult synthesis, high annealing temperatures, and electrical conductivities far below bulk silver. The …

    uiuc Repository record for Synthesis and patterning of reactive silver inks (opens in a new tab)

  2. Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices

    … machined. Both laser machined and microwaved silver inks have been mapped for conductivity using a Near Field Microwave Microscope (NFMM) and have shown improvement of conductivity compared to inks that have been cured using standard methods.

    usf Repository record for Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices (opens in a new tab)

  3. Characterization of the Integration of Additively Manufactured All-Aromatic Polyimide and Conductive Direct-Write Silver Inks

    … of this UV-DIW PI with DW-printed conductive inks as a means for obtaining high-performance hybrid AM-DW electronics. This goal has been achieved through an investigation into the increased temperature stability of AM PI on the conductivity and adhesion of DW extrusion and aerosol jet (AJ) …

    vt Repository record for Characterization of the Integration of Additively Manufactured All-Aromatic Polyimide and Conductive Direct-Write Silver Inks (opens in a new tab)

  4. Highly Conductive Silver Flake/nanowire Composites Inks and 3D Printing Processing in Flexible Electrodes Application

    … in printed electronics. Among various conductive inks, silver ink has been explored deeply and widely because its high conductivity and stability. However, with the requirement of different printed electronics especially flexible electronics, good mechanical properties become more and more …

    washington Repository record for Highly Conductive Silver Flake/nanowire Composites Inks and 3D Printing Processing in Flexible Electrodes Application (opens in a new tab)

  5. The Influence of Particle Morphology and Heat Treatment on the Microstructural Evolution of Silver Inks for Additively Manufactured RF Applications: A Comparison between Nanoflake and Reactive Inks

    … equivalents. Using direct ink writing (DIW), two silver inks, a nanoflake suspension and a nanoparticle-reactive ink, were investigated to understand the relationship between free interfacial energy, sintering behavior, DC conductivity, and RF loss. The printed silver samples were characterized …

    unt Repository record for The Influence of Particle Morphology and Heat Treatment on the Microstructural Evolution of Silver Inks for Additively Manufactured RF Applications: A Comparison between Nanoflake and Reactive Inks (opens in a new tab)

  6. Interfacial reduction phenomena in self-reducing reactive silver ink systems

    Conductive inks are becoming increasingly important as printed electronics gain popularity. However, forming highly conductive patterns at low-processing temperatures still presents a major challenge for conductive inks. Self-reducing reactive silver inks have emerged as a promising solution due to …

    colo-mines Repository record for Interfacial reduction phenomena in self-reducing reactive silver ink systems (opens in a new tab)

  7. Fabrication of short channel fully printed transistors using chemical gapping techniques with demonstrated switching at 18 GHz

    … small gap size is achieved through the use of silver inks with different chemical properties to prevent mixing. Semiconducting single walled carbon nanotubes were printed using deposition methodologies for the semiconducting layer. The combination of the short channel and CNT based …

    texas Repository record for Fabrication of short channel fully printed transistors using chemical gapping techniques with demonstrated switching at 18 GHz (opens in a new tab)

  8. Synthesis and Characterization of Copper Nanowire Inks and Investigation of Direct Ink Writing Process for Printable Electronics

    … units to allow bending, twisting and stretching. Silver inks have been in the market for quite a while and are widely used in electronic devices. Copper-based inks are poised to replace the silver inks in many applications due to their low cost and conductivity comparable to silver. Bulk copper is …

    buffalo Repository record for Synthesis and Characterization of Copper Nanowire Inks and Investigation of Direct Ink Writing Process for Printable Electronics (opens in a new tab)

  9. Highly stretchable conductors from bio-based self-healing thermoplastic polyurethanes and conductive nanoparticles

    … bio-based self-healing TPUs and water-based silver inks developed in this thesis exhibit high potential for use in the field of stretchable conductors, strain sensors, wearable technology and elastic fibres (textiles) at a much lower environmental footprint, through a prolonged lifespan and …

    qu-belfast Repository record for Highly stretchable conductors from bio-based self-healing thermoplastic polyurethanes and conductive nanoparticles (opens in a new tab) Embargoed until 2027-12-31

  10. A Study of the Parameters Involved in NIR Sintering of Silver Microparticle-Based, Pad-Printed Features

    … (NIR) sintering for producing conductive silver microparticle traces. A new pad printer was set up, and silver inks with varying concentrations of silver particles (17.5 %v/v, 20 %v/v, and 25 %v/v) were manufactured, printed, and sintered. The study identified sintering time and silver …

    byu Repository record for A Study of the Parameters Involved in NIR Sintering of Silver Microparticle-Based, Pad-Printed Features (opens in a new tab) Download PDF for A Study of the Parameters Involved in NIR Sintering of Silver Microparticle-Based, Pad-Printed Features (opens in a new tab)

  11. Development of high-performance silicon carbide based temperature and humidity sensors using low cost, industry ready materials and fabrications techniques

    … In order to facilitate these devices the printed silver interconnects must be robust and sustainable under these conditions. To achieve this, we need to investigate the failure mechanism of commercial silver inks at high temperatures and implement modifications to enhance the inks stability at …

    ets-quebec Download PDF for Development of high-performance silicon carbide based temperature and humidity sensors using low cost, industry ready materials and fabrications techniques (opens in a new tab)

  12. Digital Fabrication of Frequency Selective Surfaces for In-Building Applications Using Inkjet Printing Technology

    … intended for in-building applications using silver nanoparticle inks. The aim of this research is to investigate the performance of inkjet printed FSS panels in terms of transmission response, element conductivity, and the resolution of the printed lines, all of which are produced efficiently …

    kent Download PDF for Digital Fabrication of Frequency Selective Surfaces for In-Building Applications Using Inkjet Printing Technology (opens in a new tab)

  13. Additive Manufactured Antennas and Novel Frequency Selective Sensors

    … material extrusion, nanoparticle conductive inks are investigated for the fabrication of antennas and FSS based sensors. This research has two parts. The first involves the development of antennas at the microwave and millimetre wave bands using AM techniques. Inkjet printing of nanoparticle …

    kent Download PDF for Additive Manufactured Antennas and Novel Frequency Selective Sensors (opens in a new tab)

  14. Mechanical and electrical characterization of printed flexible electronics deformed over complex surfaces

    … the antennas were fabricated by inkjet printing silver nanoparticle ink on flexible polymer substrates such as polyethylene terephthalate (PET), polyimide, and liquid crystal polymer (LCP). Test fixtures were designed for attaching to a universal test machine, and were fabricated using 3D …

    gatech Repository record for Mechanical and electrical characterization of printed flexible electronics deformed over complex surfaces (opens in a new tab)

  15. Flame Aerosol Synthesis of Metal-containing Nanomaterials

    … molecule for direct dispersion as nanoparticle inks (nano-inks), or by embedding them in a carbonaceous or metal oxide matrix in one step. ‎Chapter 1 introduces aerosol processes, particle formation mechanisms, and methods for making nanomaterials. Flame processes are further discussed and the …

    buffalo Repository record for Flame Aerosol Synthesis of Metal-containing Nanomaterials (opens in a new tab)

  16. Multilayered Transmission Lines, Antennas and Phased Arrays with Structurally Integrated Control Electronics Using Additive Manufacturing

    … frequencies due to the low conductivity of silver inks and pastes, non-uniform crosssections, and high surface roughness. Recently, laser micromachining has been introduced as a technique to improve the conductivity of coplanar waveguide (CPW). By laser micromachining the slots of the CPW, …

    usf Repository record for Multilayered Transmission Lines, Antennas and Phased Arrays with Structurally Integrated Control Electronics Using Additive Manufacturing (opens in a new tab)

  17. Multimaterial, Core-Shell Direct Ink Writing of Flexible Strain Sensors for Pneumatically-Actuated Soft Robotic Hinge Joints

    … technique that allows for two dissimilar inks to be extruded simultaneously in a co-flow manner. In this work, custom-designed coaxial nozzles were 3D-printed using a stereolithography printer. Composite inks comprised of thermoplastic polyurethane and silver were developed and studied. …

    wvu Repository record for Multimaterial, Core-Shell Direct Ink Writing of Flexible Strain Sensors for Pneumatically-Actuated Soft Robotic Hinge Joints (opens in a new tab)