Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 161 for “"simulated body fluid"”.

  1. Degradation of pure magnesium alloys in simulated body fluid

    … to be resorbed and removed from the human body after the healing process. Polymers and ceramics are common biodegradable implants used in the human body but their mechanical properties are poor for load bearing applications. Magnesium gradually degrades in the human body and also has no …

    birmingham Download PDF for Degradation of pure magnesium alloys in simulated body fluid (opens in a new tab)

  2. Corrosion behaviour of a biodegradable rare-earth magnesium alloy in modified simulated body fluid

    … degradation of Mg alloy WE43 in modified simulated body fluids, revealing that glucose and BSA influence the corrosion rate and formation of corrosion products. Higher glucose concentrations reverse the inhibitory effect of BSA by competitively displacing BSA from binding sites, thereby …

    ubc Repository record for Corrosion behaviour of a biodegradable rare-earth magnesium alloy in modified simulated body fluid (opens in a new tab) Download PDF for Corrosion behaviour of a biodegradable rare-earth magnesium alloy in modified simulated body fluid (opens in a new tab)

  3. Investigating the in vitro corrosion behaviour of four as-cast magnesium-zinc alloys for orthopaedic applications in Simulated Body Fluid

    … in the aqueous chloride environment of the human body. However, the high corrosion rates of magnesium due to its low standard electrode potential compromise the mechanical integrity of the implant during the bone healing process. This thesis involved the fabrication of four magnesium-zinc alloys …

    ubc Repository record for Investigating the in vitro corrosion behaviour of four as-cast magnesium-zinc alloys for orthopaedic applications in Simulated Body Fluid (opens in a new tab) Download PDF for Investigating the in vitro corrosion behaviour of four as-cast magnesium-zinc alloys for orthopaedic applications in Simulated Body Fluid (opens in a new tab)

  4. Electrochemical behaviors of micro-arc oxidation coated magnesium alloy

    … produce satisfactory coating to be used in human body environment. Recent studies demonstrate that micro-arc oxidation (MAO) technique can produce hard, dense, wear-resistant and well-adherent oxide coatings for light metals such as aluminum, magnesium, and titanium. Though there are many previous …

    iupui Repository record for Electrochemical behaviors of micro-arc oxidation coated magnesium alloy (opens in a new tab)

  5. Bisphosphonate-loaded hydroxyapatite-coated implant surfaces : physico-chemical characterisation and bone cell culture studies

    … adsorption onto plasma sprayed HA (PS-HA) and simulated body fluid-grown HA (SBF-HA) coatings commonly used for orthopaedic implants. Bisphosphonates exhibit high binding affinity for the calcium present in HA and hence can be adsorbed onto HA-coated implants to exploit their beneficial …

    adelaide Repository record for Bisphosphonate-loaded hydroxyapatite-coated implant surfaces : physico-chemical characterisation and bone cell culture studies (opens in a new tab)

  6. Corrosion and Fretting Corrosion Studies of medical grade CoCrMo implant material in a more clinically relevant simulated body environment.

    … than 32mm. It has been found that the type of fluid used to simulate the fretting corrosion of biomedical materials is crucial for the reliability of laboratory tests. Therefore, to properly understand and effectively design against fretting corrosion damage in modular hips, there is the need …

    manitoba Repository record for Corrosion and Fretting Corrosion Studies of medical grade CoCrMo implant material in a more clinically relevant simulated body environment. (opens in a new tab)

  7. Increasing Hydrophilicity and Transparency of Diamond-Like Carbon Thin Films with Dopants for an Anti-Fogging Laparoscope Coating

    … through cellular assays, spectrophotometry, and simulated body fluid soaking experiments. Contact angle and surface energy measurements were performed to assess the hydrophilic qualities of the films. Plasma cleaning was utilized as a surface treatment to improve hydrophilicity; time-studies were …

    ut-knoxville Repository record for Increasing Hydrophilicity and Transparency of Diamond-Like Carbon Thin Films with Dopants for an Anti-Fogging Laparoscope Coating (opens in a new tab)

  8. Elektrochemisch gestützte Abscheidung kupfer- und zinkdotierter Magnesiumphosphatschichten auf Titan

    … unterschiedlichen physiologischen Nährmedien: simulated body fluid (SBF), fetal calf serum (FCS) und Dulbecco’s Modified Eagle Medium (DMEM). Es konnte gezeigt werden, dass eine antibakteriell wirkende Menge an Kupfer- und Zinkionen freigesetzt wurde. Zusammenfassend stellt die elektrochemische …

    wurz-thes Repository record for Elektrochemisch gestützte Abscheidung kupfer- und zinkdotierter Magnesiumphosphatschichten auf Titan (opens in a new tab)

  9. TIME DEPENDENT CHANGES IN MICRO-HARDNESS OF BIOACTIVE CEMENTS

    … in Vickers hardness after storage in the simulated body fluid (PBS). The mean Vickers hardness of the calcium aluminate/glass ionomer (CCB) material was significantly greater than the mean Vickers hardness values for the other three materials tested at all time-points evaluated. The …

    temple Repository record for TIME DEPENDENT CHANGES IN MICRO-HARDNESS OF BIOACTIVE CEMENTS (opens in a new tab)

  10. IN VITRO STUDIES ON DEGRADATION OF BIO ALLOYS AND CYTOCOMPATIBILITY WITH BONE MARROW DERIVED STEM CELLS

    … these alloys in solutions such as revised simulated body fluid (r-SBF) and Dulbecco’s Modified Eagle Medium (DMEM), we evaluate their degradation characteristics and biocompatibility. With the goal of identifying materials that safely dissolve in the body with minimal toxicity while …

    csusb Repository record for IN VITRO STUDIES ON DEGRADATION OF BIO ALLOYS AND CYTOCOMPATIBILITY WITH BONE MARROW DERIVED STEM CELLS (opens in a new tab)

  11. Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds

    … doped with ZnO and SiO2, respectively. Further, simulated body fluid maintained at 36.5°C was used to study the bioactivity and degradation behavior of the structures. The second part of the work aimed in the processing of porous titania scaffolds using polyethylene glycol as the pore-former. The …

    ucf Repository record for Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds (opens in a new tab)

  12. Synthesis and Properties of ordered Mesoporous SiO2-CaO Bioactive glasses

    … a conventional so-gel route. Immersion tests in simulated body fluid (SBF) were conducted on both of the bioactive glasses to compare the bioactivities between these two glasses. As drug carriers, antibiotic gentamicin was incorporated into the ordered mesoporous bioactive glasses. The drug …

    nus Repository record for Synthesis and Properties of ordered Mesoporous SiO2-CaO Bioactive glasses (opens in a new tab) Download file for Synthesis and Properties of ordered Mesoporous SiO2-CaO Bioactive glasses (opens in a new tab)

  13. Synthesis of calcium hydroxyapatite thin films on the stainless steel substrates and investigation of the influence of substrates surface modification on the quality of coatings /

    … steel-calcium hydroxyapatite composites in simulated body fluid was investigated. Calcium hydroxyapatite coatings were investigated employing various analytical methods such as XRD, FTIR, XPS, SEM, AFM, Raman and others. Results were summarised in conclusions.

    vilnius Repository record for Synthesis of calcium hydroxyapatite thin films on the stainless steel substrates and investigation of the influence of substrates surface modification on the quality of coatings / (opens in a new tab)

  14. Enhancement of bioactive glass biocompatibility by deposition of titanium nanofibres generated by the High Intensity Laser Induced Reverse Transfer Method (HILIRT)

    … make this structure biocompatible with the human body. In this research, glass biocompatibility was increased using a deposition method called high intensity laser induced reverse transfer (HILIRT), and the samples were utilized as enhanced-biocompatibility bioactive glass (EBBG) with a …

    uoit Repository record for Enhancement of bioactive glass biocompatibility by deposition of titanium nanofibres generated by the High Intensity Laser Induced Reverse Transfer Method (HILIRT) (opens in a new tab)

  15. Kalcio hidroksiapatito plonų sluoksnių sintezė ant specifinių paviršių /

    … of modified roughened steel were immersed in simulated body fluid (SBF) for one month. It was found that amorphous calcium phosphate and CHA were formed on the surface of stainless steel. In addition, thin layers of CHA were found to become more hydrophilic after soaking in SBF compared to …

    vilnius Repository record for Kalcio hidroksiapatito plonų sluoksnių sintezė ant specifinių paviršių / (opens in a new tab)

  16. 3D Printed PCU/UHMWPE Polymeric Blends for Artificial Knee Meniscus

    … oscillating friction and wear tests under simulated body fluid and loading conditions to replicate the natural motion of the knee. Results show that 3D printed PCU samples yielded a 27% wear depth reduction compared to molded PCU samples, which may be attributed to their porous structure …

    arkansas Repository record for 3D Printed PCU/UHMWPE Polymeric Blends for Artificial Knee Meniscus (opens in a new tab)

  17. Improvement Of Biodegradable Biomaterials For Use In Orthopedic Fixation Devices

    … surgery by being naturally broken down in the body. While currently available polymers lack the necessary mechanical properties to match bone strength, the incorporation of small amounts of hydroxylated nanodiamonds has been proven to increase the mechanical properties of the native polymer to …

    temple Repository record for Improvement Of Biodegradable Biomaterials For Use In Orthopedic Fixation Devices (opens in a new tab)

  18. Laser Surface Modification of AZ31B Mg Alloy Bio-Implant Material

    … employed to evaluate the corrosion behavior in simulated body fluid medium. Microstructure revealed grain refinement and even distribution of Mg17Al12 phase along the grain boundary for laser treated samples leading to substantial enhancement in the corrosion resistance of the laser treated …

    unt Repository record for Laser Surface Modification of AZ31B Mg Alloy Bio-Implant Material (opens in a new tab)

Page 1 of 9