Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1169 for “"single mode"”.
-
Fused taper single mode fibre couplers
… a complete study of the symmetric fused taper single mode fibre coupler. A new fabrication technique for the coupler is developed and a stable and reliable coupler package is designed and implemented. Fundamental aspects of tapers and taper couplers are examined experimentally and the cladding …
-
Single Mode Wavelength-Tunable Thulium Fiber
… requirements in constructing a high power, single frequency, wavelength tunable, continuous wave thulium fiber laser with the aim of using it to study various atmospheric transmission effects. A fine spectral control scheme using diffraction gratings is explored and improvements are made. …
-
Birefringence in single-mode optical fibres
The birefringence properties of single-mode optical-fibre waveguides are discussed.<br/><br/>A fibre birefringence measurement system has been developed specifically to measure the birefringence of fibres as a function of temperature, wavelength, twist and bending. By incorporating a birefringence …
-
A new single mode tunable TEA laser
… simple and inexpensive technique for producing a single mode TEA CO2 laser is explored. The method involves the use of an intracavity selective absorber. A large laser system used in the early research was observed to yield 1.1 J single longitudinal mode pulses. This amounted to 73% of the …
-
Field access techniques for single-mode fibres
… of the beam-expanding properties of tapers in single-mode fibres and on the development of a new and versatile approach to fibre polishing.<br/><br/>A theoretical study of the fused-taper coupler explains the differences in coupling and polarisation characteristics of strongly-fused and …
-
Operational window of single-mode optical fibers.
… Ph.D. thesis is to define the design window of single-mode dispersion-unshifted fibers. This window, defined in the mode field diameter (MFD) and cutoff wavelength (lambda c) plot is determined by the fiber properties with regards to the chromatic dispersion, the bend loss sensitivity at 1550 nm …
-
Single-mode frequency-stabilized 1.083 micrometer ring lasers
A single-mode, frequency-stabilized LNA ring laser has been developed which routinely provides output powers $\sbsp{\sim}{>}$300 mW at 1.083 $\mu$m when pumped with 5 W of the 514 nm output from an Argon ion laser. A modified CR899-21 Ti:Sapphire ring laser from Coherent Laser Group of Palo Alto …
-
Towards a Single-Mode Dispensed Polymer Optical Waveguide
… organic polymer optical waveguides suitable for single-mode operation were recently fabricated. Different dispensing pressures, polymers, and dispensing tips were used in the drawing method. The waveguides were measured to be approximately 16[mu] wide and 0.8[mu] tall. This is significantly …
-
Coupling Down Converted Light Into Single Mode Fibers
… the influence of the pump and collection mode parameters on the collection efficiency of Type I down converted photons into single mode fibers. For best single and coincidence counting rates, we find that the mode sizes should be close to the same size and that the mode waists should be …
-
Photo-induced birefringence in single-mode optical fiber
Single-mode optical fiber has been widely used not only in long-haul, high speed digital communication systems but also in sensing applications because of its inherent immunity to electromagnetic interference, low transmission loss, wide bandwidth, small size, and light weight. Birefringence is an …
-
Constructing a High Power Single-Mode Fiber Laser
… are discussed, as well as the theory behind single-mode, multimode, double-clad, and Er- Yb co-doped fiber.
-
Stabilization of single mode lasers using an introcavity perturbation
Electronic Thesis or Dissertation
-
A Study of Single Mode Optical Fiber Test System
This thesis is based on a study of single mode optical fiber test systems in the optical fiber manufacturing process. The study focussed on the operating procedure used in the testing of four important single mode fiber parameters. These parameters are the fiber attenuation, cutoff wavelength, mode …
-
High-power single-mode vertical-cavity surface-emitting lasers
… of their features. Those that operate in the single-mode regime with sufficiently high power are of particular interest because of the need for an energy-efficient solution to the shrinking bit size in hard disk drives. This work addresses this problem by a careful study of the …
-
Analysis of Thermally Diffused Single Mode Optical Fiber Couplers
… of dopants can improve the uniformity of multimode star couplers manufactured by the fused biconical taper technique. The theoretical basis for the same phenomenon in a single mode coupler is developed, on the basis of the theory of diffusion and the Gaussian approximation for circular fibers. …
-
Coupling Efficiency and Alignment Sensitivity of Single Mode Optical Fibers
Coupling efficiency an alignment sensitivity models for the coupling of light from a fundamental mode Gaussian light beam into a single mode optical fiber are given. Experimental results are presented which verify the coupling and misalignment predictions of the models. Data were taken at two …
-
Single-Mode Distributed-Feedback Lasing In Coupled Dissimilar Photonic Waveguides
… diffraction gratings are naturally dual-mode, a variety of techniques have been introduced to impose single-mode operation, including the currently ubiquitous λ/4-grating phase-shift technique. This grating phase shift, however, creates an undesirable peaky-power profile within the laser …
Page 1 of 59