Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"single-lap joint"”.

  1. Viscoelastic stress analysis of adhesively bonded joints

    … form solutions for the stress analysis of the single lap joint were studied intensively, and methods of analysis and assumptions between the analyses of Goland and Reissner, Hart-Smith and Delale and Erdogan were compared. The existing SAAS3V finite element program was modified to accommodate …

    vt Repository record for Viscoelastic stress analysis of adhesively bonded joints (opens in a new tab)

  2. Damage and Failure Analysis of Co-Cured Fiber-Reinforced Composite Joints

    Joints represent a design challenge, especially for composite structures. Among the available joining methods, co-curing is an efficient way to integrate parts for some applications. Coates and Armanios have proposed a Single Nested Overlap (SNO) co-cured joint configuration, obtained from a single …

    gatech Repository record for Damage and Failure Analysis of Co-Cured Fiber-Reinforced Composite Joints (opens in a new tab)

  3. Co-cured composite joint strength investigation based on behavior characterization of [0/±θ/90]s family

    Joints provide a path for transfer of load and are important components in an assembly of structures, particularly in translating joint strength improvements directly to significant cost savings. This cost savings is more evident in composite joints since manufacturing of more complex single piece …

    gatech Repository record for Co-cured composite joint strength investigation based on behavior characterization of [0/±θ/90]s family (opens in a new tab)

  4. Bondline temperature control using carbon fiber embedded resistive heaters

    … a uniform temperature. This is demonstrated on a single lap joint with a subsurface heatsink. Finally, the use of carbon fiber embedded heaters will be investigated as a means for manufacturing of space structures and habitats.

    washington Repository record for Bondline temperature control using carbon fiber embedded resistive heaters (opens in a new tab)

  5. Πειραματική και αριθμητική μελέτη συγκολλητών συνδέσμων μεταξύ διαφορετικών υλικών

    Joints make them attractive in industries such as aeronautics, automotive and civilengineering. When compared to mechanically fastened joints, adhesive joints have theadvantages of having fewer sources of stress concentrations, more uniformdistribution of load, and better fatigue properties. …

    greece Repository record for Πειραματική και αριθμητική μελέτη συγκολλητών συνδέσμων μεταξύ διαφορετικών υλικών (opens in a new tab)

  6. Torque Limit of a Mechanical Fastener in a Graphite/Epoxy Joint

    … preload of a mechanical fastener in a composite joint due to a lack of a fundamental knowledge base regarding the behavior of composites under fastener compressive load. As such, a novel experimental procedure was developed herein to determine the through-the-thickness compressive (TTTC) material …

    embry-riddle Repository record for Torque Limit of a Mechanical Fastener in a Graphite/Epoxy Joint (opens in a new tab)

  7. Three dimensional geometrical and material nonlinear finite element analysis of adhesively bonded joints for marine structures

    … explored in the context of application of bonded joint configurations in marine environment.<br/><br/>The research is directed at developing analysis tools for predicting the displacement, stress and strain fields in adhesively bonded joints between dissimilar adherends. In the finite element …

    soton Download PDF for Three dimensional geometrical and material nonlinear finite element analysis of adhesively bonded joints for marine structures (opens in a new tab)

  8. Dynamical Response of Adhesively Bonded Beam Subjected to Harmonic Peeling Loads

    … initiation and propagation of failure in the joint. In order to insure the reliability of these structures, their dynamic response and factors affecting their response must be understood. Dynamic response of a single lap joint subjected to an out of plane harmonic force is evaluated. The …

    sdstate Repository record for Dynamical Response of Adhesively Bonded Beam Subjected to Harmonic Peeling Loads (opens in a new tab)

  9. Failure resistance and failure modes of bolted joints between metal and thick composite plates

    … such structures increase, it is inevitable that joints will be necessary. Mechanical fastening is a popular choice in joining composites because of the ability to transfer high loads and the ease of assembly and disassembly. However, drilling operations expose the fibers to environmental factors, …

    msu Repository record for Failure resistance and failure modes of bolted joints between metal and thick composite plates (opens in a new tab)

  10. Improvements of fiber reinforced thermoplastic composite bonds: thick joint failure model, shape memory alloy reinforcements, and in-situ x-ray characterizations

    … void characterization and crack propagation of a single lap joint studied in 3D using an in-situ load frame inside of an x-ray computed tomography machine. A novel model for determining the cohesive-adhesive transition of methyl-methacrylate adhesives is also presented, which can aid in developing …

    colo-mines Repository record for Improvements of fiber reinforced thermoplastic composite bonds: thick joint failure model, shape memory alloy reinforcements, and in-situ x-ray characterizations (opens in a new tab)

  11. Effects of design parameters on a single-lap, bolted joint; using internal and surface strain measurement techniques

    … mechanism of choice and is applied to a single-lap joint geometry for this study. Fastening parameters included bolt-to-hole clearance, and the use of insertsA combination of measurements taken using embedded fiber optic strain gages, digital image correlation, and stiffness data was used …

    msu Repository record for Effects of design parameters on a single-lap, bolted joint; using internal and surface strain measurement techniques (opens in a new tab)

  12. A time integration scheme for stress - temperature dependent viscoelastic behaviors of isotropic materials

    … is used to predict the overall response of single lap-joint. Numerical simulations of time-dependent crack propagations of adhesive bonded joints are also presented. For this purpose, the recursive algorithm is implemented in cohesive elements. The numerical assessment of the TCM and …

    tamu Repository record for A time integration scheme for stress - temperature dependent viscoelastic behaviors of isotropic materials (opens in a new tab)

  13. Effect of Voids on the Crack Kinking in Single Lap Joints

    … location on the kinking of an interface crack in single lap joint. An interface crack can originate from the maximum shear stress or the maximum normal stress that occurs at the interface between the adherend and the adhesive. A void is placed ahead of the crack tip at various distances in the …

    tamu Repository record for Effect of Voids on the Crack Kinking in Single Lap Joints (opens in a new tab)

  14. Development of optical techniques for the experimental analysis of local stress and strain distributions in adhesively bonded composite joints

    … formed in adhesively bonded composite joints under quasi static and high strain rate loading. A literature review of current analytical, numerical and experimental studies of adhesively bonded joints is presented and identifies the lack of knowledge in the behaviour of composite bonded …

    soton Download PDF for Development of optical techniques for the experimental analysis of local stress and strain distributions in adhesively bonded composite joints (opens in a new tab)

  15. Analysis of the study of material behavior at impact rates of strain

    … to find out the strength of an adhesive-bonded single lap joint. The current research focuses on extending existing models to predict the strength of adhesive joints by introducing a term for strain acceleration, based on elastodynamic theory of solids. The aim of this is to explain the drastic …

    msu Repository record for Analysis of the study of material behavior at impact rates of strain (opens in a new tab)

  16. Development of improved, multi-functional, nano-structured polymer based adhesives with applications in the bonding of composite components and the repair of engineering structures with composite patches

    … (CNTsRAD) that was used for the bonding of a single lap joint (SLJ). The macroscopic “cohesive” failure of the SLJ was modeled by applying the Cohesive Zone Model and following the “local” damage mechanics approach. Reliable experimental data confirmed the validation of the model. Eventually …

    greece Repository record for Development of improved, multi-functional, nano-structured polymer based adhesives with applications in the bonding of composite components and the repair of engineering structures with composite patches (opens in a new tab)

  17. Value-retention of thermoplastic fiber-reinforced composites by ultrasonic-assisted separation and reconsolidation

    … joined using ultrasonic reconsolidation in a single-lap joint configuration, with optimized reconsolidation and post-reconsolidation parameters. These optimized reconsolidation parameters minimized fiber bundle damages, eliminated cohesive failures within the laminate, and resulted in lesser …

    freiburg-diss Repository record for Value-retention of thermoplastic fiber-reinforced composites by ultrasonic-assisted separation and reconsolidation (opens in a new tab)

  18. Experimental and Numerical Methods for Characterizing the Mixed-Mode Fracture Envelope for a Tough Epoxy

    … limit-states is a necessary task for designing joints bonded with the adhesive. The combination of both strength and ductility results in material non-linearities, making experimental characterization and numerical analyses more challenging. This work explores the quantification of fracture …

    vt Repository record for Experimental and Numerical Methods for Characterizing the Mixed-Mode Fracture Envelope for a Tough Epoxy (opens in a new tab)

  19. Influence of Overlaps on Towpreg Bonding in Automated Fiber Placement: Experiment, Simulations and Compaction Roller Design

    … parameters. Among common defects, tape overlaps can introduce surface irregularities that create regions of insufficient inter-laminar bonding in the uncured state and promote secondary defects such as wrinkling or bridging during subsequent layup passes. Understanding how overlaps interact …

    concordia Download PDF for Influence of Overlaps on Towpreg Bonding in Automated Fiber Placement: Experiment, Simulations and Compaction Roller Design (opens in a new tab)

  20. Implementation of Composites and Plastics Materials for Vehicle Lightweight

    … application. Besides, in this thesis adhesive joint was considered as alternative solution to achieve vehicle lightweight targets. Detailed material characterization and parametric study of hot melt adhesive (HMA) single lap joint were performed for bumper subsystem application. Accelerated …

    poli-torino Repository record for Implementation of Composites and Plastics Materials for Vehicle Lightweight (opens in a new tab)

Page 1 of 2