Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"sliding angle"”.
-
Effects of Acoustics on Induced Droplet Shedding In Dropwise Condensation
… To understand the relationship between droplet sliding angle and body forces such as gravity and acoustic streaming, a mathematical model has been postulated capable of predicting the critical sliding angle of droplets. Recently, a mathematical physics-based model has been developed, which can …
-
Developing Superhydrophobic Copper-Graphene Nanoplatelet Coatings to Promote Dropwise Condensation Using Thermal Spray Processes
… The APS Cu-GNP coatings exhibit water contact angles as high as 152° and sliding angle less than10° while HVOF Cu-GNP coatings showed great water mobility (with a sliding angle less than 1°) as well as high water contact angle value of 164°. The image analyses of the APS coatings showed a …
-
Μελέτη υδατικής κατάστασης και μικροαναγλύφου φυτικών ιστών
… after the removal of epicuticular waxes. Contact angle, hysteresis, sliding angle, surface free energy and water retention were then estimated for each surface. Finally, fatty acid analysis of the waxes removed from leaf surfaces, as well as of the total lipid content of leaves was performed with …
-
Enhancing Biosensor Performance with Omniphobic Lubricant-Infused Coatings
… and lower biofilm formation (96° static contact angle) in comparison to unmodified membranes (26%, 32°). The second application is in DNA biosensing, where a novel OLI coating uses carbon dioxide plasma activation to embed oligonucleotide probes. It demonstrates an optimized balance of slippery …
-
USE OF PATTERNED (SUPER) HYDROPHOBIC SURFACES IN SAMPLE PREPARATION
… if a water droplet displays both a water contact angle (θCA) >150◦, and a sliding angle (SA) <10◦. SH surfaces provide low frictional forces between a liquid droplet and the surface itself allowing for actuation using minimal force. Magnetic actuation uses an external magnetic field to manipulate …
-
Biodiesel Production and Purification with a Hydrophobic Sintered Glass Filter
… were evaluated, such as the water contact angle, water sliding angle, solvent flux, and the breakthrough pressure. These characterizations revealed that the highest breakthrough pressure was achieved when the OTS had been applied onto the filters by means of a toluene coating solution with …
-
NANOMATERIALS: FROM INTERFACIAL CHARACTERISTICS TO DEVICE APPLICATIONS
… a transition from Wenzel to Cassie states in the sliding angle drop on nanocomposite thin films. In order to complete the observation of the wetting states of water, a stable superhydrophobic nanocomposite thin film with hierarchical structure was developed.</p> <p>Furthermore, with the knowledge …
-
Synthesis and analysis of Superhydrophobic-based corrosion protection systems for aluminum alloys and their evaluations on friction stir spot-welded metals
… of the coating included static water contact angle (WCA) testing, which resulted in an average WCA of 158°. Determination of the sliding angle (SA) and WCA hysteresis found a SA of 4.08° with hysteresis of 7.6°. Adhesion of the coating to the substrate was verified by cross-hatch tape testing …
-
Dynamic modeling of belt drives using the elastic/perfectly-plastic friction law
… fails due to sharp changes of the inclination angle and the sliding angle. Because the sharp changes occur when the belt exits the pulley, the EPP friction model cannot smooth the slope discontinuities.
-
Microfluidic Gasketless Interconnect Sealed by Superhydrophobic Surfaces
… The resulting surface films had water contact angles of 162° ± 3° and a sliding angle of 3° ± 2°. The coatings remained superhydrophobic after 30 min of droplet impacts or 3 cycles of tape peeling. The spin coated superhydrophobic films were also highly transparent with transmittance of 82.5% ± …
-
Use of (Super)Hydrophobic Surfaces in Digital Microfluidics
… (SH) surface is characterized by a water contact angle of >150 and a sliding angle <10. The water fearing properties result from significantly stronger cohesive forces of the resting liquid compared to weak adhesive forces with the surface material. Microfluidics is a discipline in which minute …
-
Mechanical performance of v-ribbed belt drives
… of v-ribbed belt tension, radial movement and sliding angle with the length of active arc. This theory has been developed to obtain expressions for speed loss (slip) in linear and non-linear zones. The experimental and theoretical results show that the radial movement and slip of the v-ribbed …
-
Fabrication of robust bifunctional composite coatings by electrodeposition
… than electroplated nickel coatings. Under dry sliding conditions, the friction coefficient of electrodeposited nickel ranges from 0.4 to 0.6, while that of Ni-MoS2 can be as low as 0.1. However, during electroplating, the conductive nature of co-deposited TMD particles resulted in an enhanced …
-
Fabrication of multifunctional aluminum surfaces using laser-based texturing methods
… functionality with a static water contact angle of up to 163° and a sliding angle of 12° without chemical post-processing. This functionality permitted a self-cleaning property where the DLIP and DLW+DLIP structures provided a maximum self-cleaning efficiency with remaining contamination as …
-
Liquid-infused slippery surfaces for air-conditioning and refrigeration applications
… The results demonstrate that the LISs has a sliding angle smaller than 5˚ and reduces the water retention ratio after defrosting by more than 75% compared to the baseline specimen. A delay of ice formation is also observed. These LISs can effectively drain condensate, retard frost formation, …
-
Fundamental investigations on the barrier effect of polyester micro fiber fabrics towards particle-loaded liquids induced by surface hydrophobization
… C2F6 plasma showed a gradual decrease in contact angle and a substantial increase in sliding angle values. In addition to the treatments with gas mixtures a two-step technique, i.e., treatment with C2H4 prior to C2F6 plasma, was applied that appeared to be very promising in modifying the surface …
-
A Comparison Between Self-Cleaning Properties via Rolling Droplets and Condensation on Superhyrophobic Surfaces
… and the surface. This creates a high contact angle (CA) between the droplet and the surface and a low sliding angle (SA) of which the droplet begins to roll off the surface. SH surfaces have a variety of potential applications such as drag reduction, anti-icing, improved heat transfer through …
-
Effects of air-side surface wettability on the performance of dehumidifying heat exchangers
… features serve to increase the apparent contact angle of water droplets placed onto the surface. A consistent reduction of critical sliding angle is observed on these embossed surfaces (grooves were aligned to the direction of gravity), which is due to the contact line discontinuities and contact …
-
Fabrication of slippery textured and slippery non-textured surfaces
Slippery surfaces, i.e., surfaces that have high droplet mobility and low lateral adhesion for liquid droplets, have a wide range of application such as condensation heat transfer, anti-corrosion, lab-on-chip devices, etc. These surfaces can be categorized into smooth slippery surfaces and …
-
Wetting and frosting/defrosting study on microgrooved surfaces
… about 3 mm. Wetting anisotropy, contact angle hysteresis, and drainage behavior of water droplets on the microgrooved surfaces are found to be significantly affected by the variation in groove geometry parameters. Deposited water droplets of a wide range of volumes slide much more readily …
Page 1 of 2