Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"slip-casting"”.

  1. Near-Net Shaping and Additive Manufacturing of Ultra-High Temperature Ceramics via Colloidal Processing

    Ceramic colloidal processing routes such as slip casting, gelcasting and direct ink writing provide valuable insight into the role of interaction forces between particles, solvents, and polymeric additives in the rheology, particle packing, and strength of a ceramic green body. For …

    vt Repository record for Near-Net Shaping and Additive Manufacturing of Ultra-High Temperature Ceramics via Colloidal Processing (opens in a new tab)

  2. Sklokeramické kompozitní biomateriály

    … nebo ZrO2 v množstvích 1, 3 a 5 hm% metodou slip-casting z vodných a isopropanolových suspenzí. Připravené materiály byly následně hodnoceny z hlediska porozimetrie, relativní hustoty, vysokoteplotní dilatometrie, rentgenové difrakční analýzy, mikrostruktury a tvrdosti. Z výsledků vyplývá, že …

    brno-tech Repository record for Sklokeramické kompozitní biomateriály (opens in a new tab)

  3. Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity

    … work is concerned with a study of a ceramic casting technique, slip casting, to create porous Ti products and the effect of porosity on the mechanical properties and gas permeability of Ti compacts. An optimised Ti slurry was developed from 43 vol.% of Ti powder, 0.3 dw.% of dispersant, 0.8 …

    waikato-masters Repository record for Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity (opens in a new tab) Download file for Synthesis, Microstructure and Mechanical Properties of Titanium with Controlled Levels of Porosity (opens in a new tab)

  4. Příprava nanokrystalických keramik z oxidu zirkoničitého

    … yttritým. K přípravě vzorků je využita metoda slip casting.

    brno-tech Repository record for Příprava nanokrystalických keramik z oxidu zirkoničitého (opens in a new tab)

  5. Physical and mechanical properties of ceramic matrix composite materials for bone scaffolds

    … Ceramic matrix specimens were prepared with a slip casting technique. After sintering, specimens were examined for their physical, chemical, and mechanical properties including microstructure, surface roughness, elemental composition, crystal characterization and biaxial flexural strength. …

    bu Repository record for Physical and mechanical properties of ceramic matrix composite materials for bone scaffolds (opens in a new tab)

  6. Fabrication of polymer infused multiphase glass ceramic block

    … glass ceramic specimens were prepared with the slip-casting technique. The specimens were divided into 3 groups based on different sintering temperatures: Group 1) 850 °C, 2) 880 °C, and 3) 900 °C. After sintering, density before resin infiltration of specimens was measured and calculated. All …

    bu Repository record for Fabrication of polymer infused multiphase glass ceramic block (opens in a new tab)

  7. Pokročilé vrstevnaté keramické materiály s heterogenní mikrostrukturou pro balistické aplikace

    … složení keramické suspenze používané v metodě slip-casting při tvarování mokrou cestou. Jako optimální bylo zvoleno 5 obj. % SiC v Al2O3. Touto cestou byly připraveny keramické lamináty s ostrým rozhraním vrstev a opotřebení grafitových forem bylo minimalizováno. Připravené keramické vzorky …

    brno-tech Repository record for Pokročilé vrstevnaté keramické materiály s heterogenní mikrostrukturou pro balistické aplikace (opens in a new tab)

  8. CRAFTING INTERACTIVE ARTIFACTS THROUGH MASKING

    … to plaster molds to vary water absorption during slip casting, enabling the formation of textured ceramic. I reflect on how masking facilitates the combination and transformation of materials and expands the range of materials and fabrication approaches available to designers. I also discuss how …

    nus Repository record for CRAFTING INTERACTIVE ARTIFACTS THROUGH MASKING (opens in a new tab) Download file for CRAFTING INTERACTIVE ARTIFACTS THROUGH MASKING (opens in a new tab)

  9. Studium segregace manganu v Mn dopovaných transparentních keramikách na bázi oxidu hlinitého

    … rozpouštění manganu v matrici Al2O3. Metodou slip casting byla úspěšně připravena Al2O3 keramika a Al2O3 keramika dopovaná 1 a 5 at.% Mn3O4 s různou velikostí částic dopantu. Připravené keramické materiály byly slinuty na teplotách 1100 a 1150 °C s různou dobou výdrže. U slinutých vzorků byl …

    brno-tech Repository record for Studium segregace manganu v Mn dopovaných transparentních keramikách na bázi oxidu hlinitého (opens in a new tab)

  10. Calcium zirconate materials for refractory applications

    … were formed using the press process as well as slip casting. The thermomechanical properties were promising, which presents a starting point for the usage of refractories based on calcium zirconate in a wide field of possible applications. Remarkable were the residual strengths of about 5 MPa …

    qucosa-diss

  11. Colloidal Processing, Microstructural Evolution, and Anisotropic Properties of Textured Ultra-High Temperature Ceramics Prepared Using Weak Magnetic Fields

    … UHTCs were prepared by magnetically assisted slip casting (MASC) in weak magnetic field (B ~ 0.5 T). Analytical calculations describing the balance of torques acting on the suspended particles suggested that texture would form at such low magnetic fields. The calculations include a novel …

    vt Repository record for Colloidal Processing, Microstructural Evolution, and Anisotropic Properties of Textured Ultra-High Temperature Ceramics Prepared Using Weak Magnetic Fields (opens in a new tab)

  12. Μικροδομή και μηχανικές ιδιότητες σύνθετων υλικών κεραμικής μήτρας με μεταλλικά εγκλείσματα

    … properties via a suitable processing route (slip-casting) followed by sintering under a reducing atmosphere. Four different compositions were fabricated including samples of: (i) pure alumina, (ii) alumina reinforced with metallic copper, (iii) alumina reinforced with tungsten, (iv) alumina …

    greece Repository record for Μικροδομή και μηχανικές ιδιότητες σύνθετων υλικών κεραμικής μήτρας με μεταλλικά εγκλείσματα (opens in a new tab)

  13. Casting a glance : a [i.e. an] exegesis presented in partial fulfilment of the requirements for the degree of Master of Fine Arts at Massey University, Wellington, New Zealand

    … for these hackneyed household items. I utilise a slip casting process to create indexical representations of banal objects. A cast object is a naked rendering of the original, a sanitised imitation, and a foundation from which to explore materials and their inherent properties. Seductive in its …

    massey Repository record for Casting a glance : a [i.e. an] exegesis presented in partial fulfilment of the requirements for the degree of Master of Fine Arts at Massey University, Wellington, New Zealand (opens in a new tab)

  14. Development of a calcium-based sorbent for hot gas cleanup

    … preparation methods: impregnation, dry pressing, slip casting, pelletization and casting received the most consideration. Density and porosity, surface area analysis, crush strength, X-ray diffraction and SEM analytical techniques were used to characterize the potential sorbents after preparation. …

    iastate Repository record for Development of a calcium-based sorbent for hot gas cleanup (opens in a new tab)

  15. Fabrication of LiYO2 Galvanic Cells to Determine the Thermodynamic Properties of Lithium Alloys

    … done. The electrolyte was fabricated by slip casting in powder molds. A Y2O3-MgO composition was identified and used to fabricate a lid for the cell. Impervious cells were obtained by liquid phase joining and sintering techniques. Heating rate was found to be a key parameter in the …

    mcmaster Repository record for Fabrication of LiYO2 Galvanic Cells to Determine the Thermodynamic Properties of Lithium Alloys (opens in a new tab)

  16. Estudo de sistemas vítreos para infiltração em alumina

    … First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the …

    brazil-ufrn Repository record for Estudo de sistemas vítreos para infiltração em alumina (opens in a new tab)

  17. COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA

    … were then compacted by means of centrifuging and slip casting. The compacts exhibited uniform green microstructure and a high green density of 64 % th, which is comparable to that of a dense, random compact of equal-sized spheres, over the range of suspension concentrations, compacting conditions, …

    nus Repository record for COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA (opens in a new tab) Download file for COLLOIDAL PROCESSING AND SINTERING OF NARROW-SIZE-DISTRIBUTION SUBMICRON ALUMINA (opens in a new tab)

Page 1 of 3