Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"slow-cooled"”.

  1. The mechanical properties of glassy poly (methyl methacrylate)

    … strain-rates and temperatures. Both fast-cooled and slow-cooled samples have been examined in order to determine the effect the rate of cooling has upon the mechanical properties. The ß and α’ relaxations were revealed in the experimental results. The difference in mechanical properties of …

    auckland-ms Repository record for The mechanical properties of glassy poly (methyl methacrylate) (opens in a new tab)

  2. Recycling steel slag as a cement additive

    … (Fe2C<3) will form hydraulic minerals when cooled from a slag melt. Thus, the valence state of the iron oxide in slag and cement systems will directly influence the cementitious properties of the material. This work explores the effects of Fe oxidation state, overall composition, and cooling …

    ubc Repository record for Recycling steel slag as a cement additive (opens in a new tab) Download PDF for Recycling steel slag as a cement additive (opens in a new tab)

  3. Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates

    … The fatigue behavior of fast (475° F/min) and slow (1° F/min) cooled specimens of the following two layups was studied: Layup A of (-45/0/45/90), and Layup B of (45/90/-45/0),. All specimens were subjected to a load controlled, Tension - Tension fatigue loading with a stress ratio R = 0.1 at a …

    vt Repository record for Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates (opens in a new tab)

  4. Development and processing of nickel aluminide-carbide alloys

    … to evaluate the NiAl-Mo-C system: arc- melting, slow cooling, and containerless directional solidification. Arc-melting provided a wide range of compositions in an economical and simple fashion. The slow cooled ingots provided larger ingots and slower cooling rates than arc-melting. Directional …

    ut-knoxville Repository record for Development and processing of nickel aluminide-carbide alloys (opens in a new tab)

  5. The topochemical reduction of ru-containing double perovskite oxides

    … samples of LaSrNiRuO6 react much faster than the slow-cooled samples. Detailed structural and microstructural characterisation of quenched and slow-cooled samples of LaSrNiRuO6 show that both samples are structurally indistinguishable, with differences in reactivity arising from their …

    oxford Repository record for The topochemical reduction of ru-containing double perovskite oxides (opens in a new tab)

  6. Giant Non-Joulian Magnetostriction in Fe-Al Single Crystals

    … volumetric expansion from quenched crystals to slow cooled crystals also depended heavily on the orientation of the magnetic field, with reduced magneto-volume responses ranging from ~2.4 to 0.5 times smaller for fields parallel to the [100] and [110] crystal axes respectively. These results …

    temple Repository record for Giant Non-Joulian Magnetostriction in Fe-Al Single Crystals (opens in a new tab)

  7. Effect of Triacylglycerol Crystallinity and Colloidal Acid Stability on Particle Properties, In Vitro Lipolysis, and Bioaccessibility of Omega-3 Fatty Acid Nanoemulsions

    … soy lecithin (2.2 wt%; AU) were fast or slow cooled to 37°C after microfluidization. Similar particle size distributions and D3,2 and D4,3 values were achieved, although AS droplets were statistically larger (p<0.05). TAG crystallinity absence and presence in the PO and PS emulsions, …

    guelph Repository record for Effect of Triacylglycerol Crystallinity and Colloidal Acid Stability on Particle Properties, In Vitro Lipolysis, and Bioaccessibility of Omega-3 Fatty Acid Nanoemulsions (opens in a new tab)

  8. Thermal, Electrical, and Structural Behavior of Silver Chalcogenide Composites

    … and ZT = 1.5 at T= 680 K from its respective slow-cooled and quenched samples. These results suggest that the formation of composites is a viable way to develop a phonon-glass-electron-crystal (PGEC).

    clemson Repository record for Thermal, Electrical, and Structural Behavior of Silver Chalcogenide Composites (opens in a new tab)

  9. Microstructure-sensitive plasticity and fatigue of three titanium alloy microstructures

    … age-hardened (STA), and (3) Ti-18 beta-annealed, slow-cooled, age-hardened (BASCA). The calibrated models have been utilized to simulate fatigue loading of variant microstructures to investigate the influence of mean grain size, crystallographic texture, and phase volume fraction. The driving …

    gatech Repository record for Microstructure-sensitive plasticity and fatigue of three titanium alloy microstructures (opens in a new tab)

  10. Characterization of Lamellar Liquid Crystal Emulsifiers in Topical Creams Containing a Novel Solvent

    … results when lamellar LLCs were heated and slow cooled to ambient conditions. It is possible a different crystalline structure was produced upon cooling the sample; however, continued research is needed to definitively determine these results.

    mo-state Repository record for Characterization of Lamellar Liquid Crystal Emulsifiers in Topical Creams Containing a Novel Solvent (opens in a new tab)

  11. Studying Microflora of Semi-hard Cheese, and Sporulation within Contact Surface Biofilms

    … to understand the effect of fast and slow rate of cooling on cheese microflora during ripening process at different temperatures. A cheese plant noticed an active growth of non-starter lactic acid bacteria, especially the heterofermentative bacteria, in ripened cheese blocks, which …

    sdstate Repository record for Studying Microflora of Semi-hard Cheese, and Sporulation within Contact Surface Biofilms (opens in a new tab)

  12. Lead-Free Piezoceramic Materials for SONAR Transducer Applications

    … its piezoelectric performance in comparison to slow-cooling. The best results achieved were for air-quenched Mn-doped BF-BT with a d33 of 176 pC/N and Tc of 450oC, also at x=0.01. This is an improvement over slow-cooled BF-BT-Mn which recorded a d33 of 91pC/N with the same variables. Co-doping …

    whiterose Download PDF for Lead-Free Piezoceramic Materials for SONAR Transducer Applications (opens in a new tab)

  13. Solidification of Hot-Dip Galvanized Coatings

    … Finally, zinc crystals were smaller for the slow-cooled coatings while zinc grains had almost the same diameter for the intermediate and fast-cooled coatings on both the smooth and rough substrates. Factors affecting the solidified microstructure, crystallographic orientation of zinc grains …

    mcmaster Repository record for Solidification of Hot-Dip Galvanized Coatings (opens in a new tab)

  14. The effect of microstructure on strain localization in the precipitate free zone of Al-Mg-Si alloys

    … quantified. In T6 condition it was found that slow cooling (~ 6 C/s) results in the formation of ~ 300 nm wide PFZ near the grain boundaries whereas the PFZ width was ~ 55 nm in fast quenched (~ 1500 C/s) sample. It was observed that the magnitude of strain localization is affected by the …

    ubc Repository record for The effect of microstructure on strain localization in the precipitate free zone of Al-Mg-Si alloys (opens in a new tab) Download PDF for The effect of microstructure on strain localization in the precipitate free zone of Al-Mg-Si alloys (opens in a new tab)

  15. Precipitate Generation and Characterization of Corrosion Source Alumina for GSI-191 Chemical Effects Issue

    … with a decrease in cooling rate, with rapidly cooled particles having a diameter of approximately 12 nm irrespective of pH, whereas intermediate and slow cooled particles increase in size with increasing pH. The results of these studies lay a foundation for development of improved surrogate …

    tamu Repository record for Precipitate Generation and Characterization of Corrosion Source Alumina for GSI-191 Chemical Effects Issue (opens in a new tab)

  16. THE DEVELOPMENT AND ANALYSIS OF A CLOSED SYSTEM OF VITRIFICATION FOR MAMMALIAN EMBRYOS

    … avoids ice crystals. The 'gold standard' is the slow-cool method, which uses low concentrations of cryoprotectants, a long time to cool embryos and produces extracellular ice crystals. Prior to introducing vitrification as part of the human cryopreservation regime, it is important that …

    clemson Repository record for THE DEVELOPMENT AND ANALYSIS OF A CLOSED SYSTEM OF VITRIFICATION FOR MAMMALIAN EMBRYOS (opens in a new tab)

  17. Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation

    … of nitrogen for instance was reduced in fast-cooled samples, despite of the fact that those samples possessed a greater overall free volume content. Fast cooling rates may generate highly restricted conformations which hinder local motions, and therefore tend to increase the activation energy …

    vt Repository record for Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation (opens in a new tab)

  18. Storage of mouse embryos of different genotypes

    … after vitrification or after slow cooling. Following storage the embryos were washed and cultured at 37$\sp{\underline\circ}$C under an atmosphere of 5% CO$\sb2$ in air and the percentage of embryos which developed to the blastocyst stage was assessed. The embryos stored at …

    uiuc Repository record for Storage of mouse embryos of different genotypes (opens in a new tab)

  19. The characteristics of Titanium-nickel alloys produced by powder technology

    … formation of second phase precipitates in the slow cooled samples or the production of a supersaturated structure in water quenched material.<br></br><br></br>The pressed and sintered specimens display a well defined shape memory behaviour. The extent of shape recovery observed, following …

    the-open-u Download PDF for The characteristics of Titanium-nickel alloys produced by powder technology (opens in a new tab)

  20. Relationships between selected features of helical or spur gears and size distortions due to heat treatment

    … a grade number of 1518 that had been carburized, slow cooled, received induction heating of the teeth, and quenched in cold oil. These significant correlation coefficients were between: (a) gear outside diameter, approximate body/tooth volume ratio, and tooth thickness distortion, and (b) cutter …

    northern-iowa Repository record for Relationships between selected features of helical or spur gears and size distortions due to heat treatment (opens in a new tab)

Page 1 of 2