Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 81 for “"sludge dewatering"”.
-
Conditioning for shear in sludge dewatering
… how chemical conditioning agents and mechanical dewatering devices affect sludge dewatering with respect to shear. Bench scale experiments were performed to determine the effect of shear and mole charge on polymer dose requirements using anaerobically digested sludge. Lime, ferric chloride, and …
-
Filter Press Sludge Dewatering: Theory, Operation, and Cost
Mechanical dewatering by filter pressing has received renewed interest as press design, filter media, unit capacity, and automation have improved. The ability to produce a dry cake and low filtrate SS, are major advantages. Technology and experience in the United States is very limited, and design …
-
Municipal sludge dewatering using a belt filter press
… anaerobically digested and aerobically digested sludges to determine the optimum polymer conditioning for a belt filter press The optimum polymer dosages for all three zones of a belt filter press were compared with each other to determine the best overall conditioning. The requirements of all …
-
Freeze-Thaw Sludge Dewatering and Stabilisation using Ferrate(VI)
… conditioning for the stabilisation and dewatering of wastewater sludges. The purpose of the research was to develop a simple and effective sludge management approach for remote communities in cold climates. Freeze-thaw sludge dewatering with gravity meltwater drainage reduced the sludge …
-
Parameter uncertainty and modeling of sludge dewatering in one dimension
… step in the ultimate disposal of wastewater sludges. Most commonly, sludges are dewatered by pressure-filtration methods. Mathematical models of the physics of the sludge dewatering process would provide the ability to predict dewatering performance and optimize the design and operation of …
-
Deinking and kraft mill sludge dewatering using a laboratory sludge process
A laboratory sludge press was used to investigate the dewatering of various wastewater treatment sludges generated in deinking mills and kraft pulp: mills. The effects of pressure applied to the sludge, pressing time and temperature were studied in terms of their effects on sludge cake solids …
-
Polymer dose prediction for sludge dewatering with a belt filter press
… to examine the polymer mixing requirements for sludge dewatering with a belt filter press. This involved correlating full-scale field studies to small scale laboratory testing. Bench testing involved the use of a high-speed mixer and two sludge dewatering response tests: the capillary suction …
-
The role of bound water content in defining sludge dewatering characteristics
Several available methods of measuring sludge bound water content in the laboratory were examined. The effect of polymer conditioning on the bound water content of biological sludge samples was measured using the dilatometric method. The effects of mechanical dewatering on the bound water content …
-
The role of floc density measurements in analyzing sludge dewatering characteristics
… may play a significant role in analyzing sludge dewatering characteristics. A laboratory technique was developed to measure this property by means of isopycnic centrifugation. Four laboratory sludges were subjected to a series of dewatering tests: gravity thickening, centrifugation, vacuum …
-
Acid mine drainage: Sludge dewatering, metal recovery and synthesis of magnetite nanoparticles
… AMD treatment generates large volumes of sludge with low solids which are difficult to dewater. In this study, a systematic investigation was carried out on the characteristics and dewaterability of AMD sludge produced from an ammonia neutralization operation, and the dewatering …
-
Enhancement of Sludge Dewatering: A look at Polymer Maturation and Shear Optimization
… polymer maturation time to yield the highest dewatering. This was done with spectrophotometry and corroborated by spiking sludge with polymers of different age. In addition, the spectrophotometer had the sensitivity to detect changes to polymer temperature, pH, chlorine content, and mixing …
-
Laboratory evaluation of conditioning requirements for sludge dewatering using belt filter press
… pressure during the expression stage of a dewatering process. Bench-scale experiments performed with anaerobically digested, alum, and secondary sludges used a high-speed mixer to gauge mixing intensity effects, and a wedge zone tester to gauge applied pressure effects on conditioning …
-
Measurement of Polymer Concentration and Optimization of Sludge Dewatering Using UV-VIS Spectroscopy
Optimization of conditioning and dewatering processes is a continuing challenge for wastewater treatment plants. This study investigated the use of UV-Vis spectroscopy to measure and optimize the polymer dose during water and wastewater treatment. Residual polymer concentrations were also measured …
-
Floc density measurement and the effects of microproperty variations on sludge dewatering characteristics
The dewatering characteristics of sludges produced by water and wastewater treatment plants bear heavily on the methods chosen to treat and dispose of the sludge, as well as on the costs associated with handling the large volumes of sludge produced at these facilities. This study investigated why …
-
Determination Of Optimum Polymer Dose For Grand Forks Wastewater Treatment Plant Lagoon Sludge Dewatering
… is currently sending its waste activated sludge (WAS) from the activated sludge treatment process to an existing on-site wastewater treatment lagoon which has been in operation since 2003. The plant produces approximately 65,000 gallons of WAS per day. Because of this high level of …
-
Towards Real-time sludge dewatering process optimization using ultraviolet-visible spectrophotometry and torque rheology
… research were to develop systems to optimize sludge treatment processes. The first study in this thesis analyzed and improved the sensitivity of UV-Vis spectrophotometry for the detection of polymer in dewatered sludge supernatant. The second study developed a two-stage in-line and real-time …
-
Phosphorus Removal From EBPR Sludge Dewatering Liquors Using Lanthanum Chloride, Aluminum Sulfate and Ferric Chloride
… (CP) because of its lower costs and reduced sludge production. However, downstream solids handling processes such as digestion, sludge storage and dewatering promote an undesirable release (i.e. secondary release) of polyphosphate that was stored within EBPR sludge. Released phosphate is …
-
Freeze/thaw treatment for sludge dewatering, nutrient recovery and biogas production in Northern Canadian Communities
Wastewater sludge is considered a valuable source of nutrients and energy. Freeze/thaw treatment is an efficient dewatering method for wastewater sludge management in First Nation communities located in cold climate conditions. Natural freeze/thaw is a simple, practical and low cost method, which …
-
The effect of polymer dose and mixing intensity on sludge dewatering with a plate and frame filter press
… were performed with anaerobically digested sludge and a plate and frame filter press to determine filter press performance over a range of polymer doses and under a variety of sludge and polymer mixing conditions. In addition, bench-scale polymer dosing and mixing experiments were conducted …
-
Comparative study of sludge dewatering and thickening characteristics for biological phosphorus removal process and conventional activated sludge process sludges
Due to the unpredictable nature of sludges, it is imperative to test a sludge from every new process in order to design the sludge handling equipment properly. In this study, sludge from the Virginia Initiative Plant, a pilot scale unit employing the UCT biological nitrogen and phosphorus removal …
Page 1 of 5