Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 179 for “"sodium silicate"”.

  1. Some effects of OH groups on sodium silicate glasses

    "Glasses of various compositions in the Na₂O-SiO₂ system were prepared with different levels of OH concentration. Phase separation kinetics, thermal expansion, radiation induced optical absorption, and internal friction of these glasses were studied. The increase in OH content in these glasses was …

    must-thes Repository record for Some effects of OH groups on sodium silicate glasses (opens in a new tab)

  2. Crystallization kinetics of lithium disilicate and sodium silicate glasses

    … of metastable crystalline phases in lithium disilicate glass has been a subject of controversy for decades. Here, one aspect of this problem relating to the stability of these non-equilibrium phases when glasses are heated for extended time periods in the nucleation regime is addressed. The …

    arizona-thes Repository record for Crystallization kinetics of lithium disilicate and sodium silicate glasses (opens in a new tab)

  3. Low Temperature Behavior of Potassium and Sodium-Silicate Glasses

    … of a system of well characterized potassium and sodium silicate glasses have been measured in an effort to better understand the nature of the low-energy excitations which exist in all glasses and to further investigate relationships between the low-temperature behavior of glasses and their …

    uiuc Repository record for Low Temperature Behavior of Potassium and Sodium-Silicate Glasses (opens in a new tab)

  4. Low temperature behavior of potassium and sodium silicate glasses

    Submitted by Carolyn Mead (cmead2@illinois.edu) on 2011-06-07T14:44:59Z No. of bitstreams: 1 1984_macdonald.pdf: 3650459 bytes, checksum: 70fc0b9733fcfe218c2144fba9a3ad8c (MD5)

    uiuc Repository record for Low temperature behavior of potassium and sodium silicate glasses (opens in a new tab)

  5. Nucleation kinetics of phase separation in a sodium silicate glass

    … dependence of the nucleation rate for a sodium silicate glass composition in the binodal regime was calculated. These calculations used a minimum of assumptions in order to determine the limits on certain thermodynamic variables, chiefly surface energy. Many of the values used in these …

    arizona-thes Repository record for Nucleation kinetics of phase separation in a sodium silicate glass (opens in a new tab)

  6. A Study of the flow Performance of a Sodium Silicate Furnace

    The flow characteristics of neutral sodium silicate glass in an open hearth regenerative furnace have been studied using a one tenth scale physical model. The constraints of similarity have been investigated and discussed, and the use of sodium liquor as a cold modelling solution has been …

    aston Repository record for A Study of the flow Performance of a Sodium Silicate Furnace (opens in a new tab) Download PDF for A Study of the flow Performance of a Sodium Silicate Furnace (opens in a new tab)

  7. Bonding Characteristics and Devitrification Behavior in Iron-Containing Sodium-Silicate Glasses

    … the addition of iron oxides to the sodium silicate glasses can strengthen the chemical bondings and immobilize the transport of sodium cations. Hence, they stabilize the binary sodium-silicate glasses and promote the formation of (gamma)-Na(,2)Si(,2)O(,5) phase. From a simple …

    uiuc Repository record for Bonding Characteristics and Devitrification Behavior in Iron-Containing Sodium-Silicate Glasses (opens in a new tab)

  8. Strength and Environmental Properties of Cemented Paste Backfill That Contains Sodium Silicate

    … the carbon footprint of the mining industry. Sodium silicate is the most recent chemical additive that is proposed to reduce the binder content in CPB. Sodium silicate is an alkaline solution that is used to activate a pozzolanic material, such as cement, slag and Fly ash. However, the effect …

    ottawa-retro Repository record for Strength and Environmental Properties of Cemented Paste Backfill That Contains Sodium Silicate (opens in a new tab)

  9. Impact of permeation and gelling times on the strength of N-sodium silicate grouted sands

    … the behavior of Ottawa sand grouted using N-sodium silicate grout neutralized by dibasic ester. Sodium silicate grouting is one of the oldest methods in chemical grouting; its survival in the field is largely due to its economics. This type of grout is among the least expensive in its family, …

    texas Repository record for Impact of permeation and gelling times on the strength of N-sodium silicate grouted sands (opens in a new tab)

  10. Treatment of iron bearing groundwaters by the simultaneous addition of sodium silicate and sodium hypochloride

    … many communities. The simultaneous addition of sodium silicate and sodium hypochlorite to iron bearing groundwaters has been demonstrated to effectively prevent iron precipitation and offers a relatively inexpensive alternative to conventional treatment. This method might gain wider acceptance …

    ut-knoxville Repository record for Treatment of iron bearing groundwaters by the simultaneous addition of sodium silicate and sodium hypochloride (opens in a new tab)

  11. Transforming waste glass to sodium silicate; an activator for cement-free binders and concrete products

    … rely heavily on chemical activators, such as sodium silicate, these activators are not user, nor eco-friendly. For example, the production of sodium silicate often involves direct fusion which requires the melting of soda ash (Na2CO3) and a source of silica (typically quartz sand SiO2) at …

    qu-belfast Repository record for Transforming waste glass to sodium silicate; an activator for cement-free binders and concrete products (opens in a new tab) Download PDF for Transforming waste glass to sodium silicate; an activator for cement-free binders and concrete products (opens in a new tab)

  12. Temperature Dependency of the Rheological Properties and Strength of Cemented Paste Backfill That Contains Sodium Silicate

    … and PCI/FA) and contained different dosages of sodium silicate (0%, 0.1%, 0.3%, and 0.5%). The results obtained show that rheology of CPB increases with the progress of curing time. It also increases with the increase in the initial (mixing and curing) temperature and content of sodium silicate. …

    ottawa-retro Repository record for Temperature Dependency of the Rheological Properties and Strength of Cemented Paste Backfill That Contains Sodium Silicate (opens in a new tab)

  13. Influence of sand friction angle, grout stiffness, and confinement on the behavior of acrylamide and sodium silicate grouted sand

    In the geotechnical engineering field, grouting is a commonly used option within the plethora of ground improvement methods. Yet, the practice of grouting relies heavily on empirically developed models to estimate strength and predict grouted soil behavior. Collectively, these models consider many …

    texas Repository record for Influence of sand friction angle, grout stiffness, and confinement on the behavior of acrylamide and sodium silicate grouted sand (opens in a new tab)

  14. Role of silica polymerization in the treatment of iron bearing groundwaters by the addition of sodium silicate and sodium hypochlorite

    … communities. Treatment by the addition of sodium silicate and sodium hypochlorite/chlorine to these iron bearing waters provides a recently exploited and relatively in expensive alternative to conventional treatment. This technique does not remove the iron from the water but sequesters or …

    ut-knoxville Repository record for Role of silica polymerization in the treatment of iron bearing groundwaters by the addition of sodium silicate and sodium hypochlorite (opens in a new tab)

Page 1 of 9