Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"solderability"”.
-
Solderability Study of Tin/Lead Alloy Under Steam-Aging Treatment by Electrochemical Reduction Analysis and Wetting Balance Tests
… testing method -- it even restored solderability. Comparison of electrochemical reduction behavior of samples under different treatment indicates that steam-aging can not reproduce exactly the effect of naturally atmospheric aging, and may not be the best artificial accelerating …
-
Electrical Characterization of Flux/Substrate Interface
Solderability and processibility of soldering depend upon both the quality of the flux in a solder paste and the surface condition of the substrate of a printed circuit board. A means of monitoring solderability has been developed using both AC and DC electrical techniques. A physical model of …
-
A Study of the Processing Properties of Hard-Particle Reinforced Composite Solders
… ageing on the composite solder formulations. The solderability parameters wetting and speed of soldering, reflow temperature, and the thermal stability of the resulting composite solder were also examined.
-
Diffusion Kinetics and Microstructure of Eutectic and Composite Solder/Copper Joints
… have been proposed as controlling mechanisms for solderability and reliability of solder/copper joints. The goal of this study was to investigate the diffusion kinetics and microstructures of six types of composite solder/copper joints.
-
Effects of Solder-Dipping as a Termination Re-Finishing Technique
… replacement of the pre-existing finish and poor solderability from re-finishing. This study overviews solder-dipping as a re-finishing technique and identifies key process and part parameters that could result in risks. A physical analysis procedure was developed and implemented to assess these …
-
Carbon Fiber Electronic Interconnects
… carbon fibers to enhance its conductivity and solderability. Analytical evaluations and experimental mechanical and electrical characterizations have been conducted to conclude that the carbon fiber interconnect is a promising interconnect technique.
-
The electrodeposition of copper on carbon
… carbon, nature of the interface, polishability, solderability, effect of the carbon surface, effect of temperature of plating, and to determine a suitable etching solution for the electrodeposited copper. The carbon samples that were used were approximately three-eighths of an inch in diameter …
-
Impact of Board Pad Finish of the SnPb and Lead-free Solder Interconnect Reliability for Leadless Chip Resistors Under Random Vibration Loading
… nickel immersed in gold, and organic solderability preservative, while tin-lead hot air solder leveling pad finish assembled with tin-lead solder served as a baseline. Destructive failure analysis is used to assess failure locations. Although the results obtained from the test indicate …
-
Development of Al, Mn, & Zn doped Sn-Ag-Cu-X solders for electronic assembly
… in solder joint solidification. Cu substrate solderability of these SAC+X alloys was investigated at concentrations between 0.01-0.25 wt. % using globule wetting balance tests due to concern about increased oxidation during reflow. Asymmetric four point bend (AFPB) tests were conducted on …
-
Infusion of 2D Hexagonal Boron Nitride Nanosheets With Glass Dielectric PCBs for Enhancing Fracture Toughness, Dielectric Performance, and Solder Wettability for Semiconductor Packaging
… by increased moisture resistance and enhanced solderability. These synergistic improvements establish glass-hBN nanocomposites as a promising platform for next-generation wide-bandgap power electronics and high-frequency packaging.
-
Infusion of 2D Hexagonal Boron Nitride Nanosheets With Glass Dielectric PCBs for Enhancing Fracture Toughness, Dielectric Performance, and Solder Wettability for Semiconductor Packaging
… by increased moisture resistance and enhanced solderability. These synergistic improvements establish glass-hBN nanocomposites as a promising platform for next-generation wide-bandgap power electronics and high-frequency packaging.
-
The effect of arsenic on tin-lead and lead rich lead-tin-antimony alloys
… solder drop, representing the wetting power or "solderability". Certain quaternary alloys of arsenic, tin, antimony and lead were investigated by thermal analysis and micro-examination, and a possible mode of solidification suggested. Crystals of the tin-arsenic compound Sn3As2 were present in …
-
Microstructural and mechanical poperties of a novel lead-free solder
… a fine 3-phase microstructure, and very good solderability in comparison to Sn-Pb solders. Investigations into the addition of small amounts of cobalt or other transition metals to the ternary eutectic (Sn-Ag-Cu), to improve the useful temperature range, was performed. Examination of the bulk …
-
Advanced metallization for screen-printed solar cells
… maintaining the large current carry capacity and solderability of screen printed metal. Further investigation on the voltage potential of the advanced semiconductor finger front shows over 700 mV implied VOC and 680 mV real VOC can be achieved on test structures using solar grade p-type CZ wafer. …
-
Evaluation and Modeling of Electrochemical Migration on Printed Circuit Boards
… tin-lead and lead-free), board finish (organic solderability preservative versus lead-free hot air solder leveling), spacing (25 mil versus 12.5 mil), and voltage (40 V versus 5 V bias), solder mask (using and not using), flux solids content. In-situ measurements of SIR, energy-dispersive …
-
Aerosol Processing for Plated Selective-Emitter Silicon Solar Cells
… of plated laser-structured contacts for improved solderability and module reliability. The latter will require that the higher than desirable contact resistance of NiGD-treated metal contacts, identified through this research to be due to the formation of an oxide-rich interlayer, be effectively …
-
Povrchové úpravy mědi při výrobě desek plošných spojů
Práca sa zaoberá skúmaním a porovnávaním vlastností rôznych typov povrchových úprav, ich kvalít a nedostatkov a perspektívnosti využitia v budúcnosti. Špeciálny dôraz sa kladie na nový produkt na poli OSP, Glicoat F2 od spoločnosti SHIKOKU CHEMICALS CORPORATION a imerzný cín. Vyhodnocuje sa ich …
-
Vliv povrchových úprav DPS na pájitelnost při pájení v parách
Práce se zabývá problematikou pájení v parách a smáčením povrchu pájkou při procesu pájení. Podrobněji popisuje výhody a nedostatky jednotlivých povrchových úprav pájecí ploch na DPS. Obecně charakterizuje vlastnosti bezolovnatých pájek a tavidel. Popisuje princip pájení v parách, včetně vlastností …
-
Modifikace metody smáčecích vah pro měření smáčivosti SMD
Práca prezentuje hlavné vplyvy na zmáčavosť SMD a DPS spájkou SAC 305 a možnosti jej testovania. Vypracovali sme návrh na modifikáciu metódy zmáčacích váh na gužôčkovú metódu. Testovali sme rozdiely v teplotnom profile a určili kompenzáciu teplotného rozdielu. Testovali sme rôzne typy zakončení SMD …
-
Study of Manufacturing Processes for Flexible Biosensors and Bioelectronic Platforms
Advanced manufacturing methods for the production of flexible printed circuit boards (FPCBs), nanomembrane biosensors, and wireless measurement systems have transformed healthcare monitoring and human-machine interfaces from large, stationary equipment to palm-sized wearables. These soft and …
Page 1 of 2