Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"solid solution strengthening"”.

  1. Solid solution strengthening of magnesium

    Solid solution strengthening in magnesium polycrystals containing Zn, Al, Cd, In and Pb as solute has been investigated over the temperatures between 78° and 513°K with particular emphasis on the dilute alloys. The variation of yield stress with concentration occurs in either two or three stages. …

    ubc Repository record for Solid solution strengthening of magnesium (opens in a new tab) Download PDF for Solid solution strengthening of magnesium (opens in a new tab)

  2. Solid solution strengthening mechanisms in high entropy alloys

    … trial-and-error experimentation. Although solid solution strengthening is the main strengthening mechanism of HEAs, the fundamentals behind this mechanism are not fully understood in this context, and further consideration with respect to modeling is warranted. In this work, the solid …

    colo-mines Repository record for Solid solution strengthening mechanisms in high entropy alloys (opens in a new tab)

  3. Solid solution strengthening and texture evolution in Mg-Y alloys

    … the valence may be responsible for the enhanced strengthening of Y in Mg. Strain rate sensitivity measurements carried out under tension and compression reveal that Mg-Y alloys show decreasing SRS with increasing Y content at 298K and exhibit a negative SRS in highly concentrated alloys. At low …

    mcmaster Repository record for Solid solution strengthening and texture evolution in Mg-Y alloys (opens in a new tab)

  4. Improving Mechanical Properties of Tin+1-A-Cn (A=Al or Si) Max Phases Through Solid Solution Strengthening and Fiber Reinforcement

    … on their mechanical properties by either solid solution strengthening due to substitution of Al with Si, or reinforcement with alumina ceramic fibers. The reaction synthesis of Ti2AlC from Ti-Al-TiC powder mixture was investigated in the temperature range of 700oC and 1500oC using pulsed …

    tamu Repository record for Improving Mechanical Properties of Tin+1-A-Cn (A=Al or Si) Max Phases Through Solid Solution Strengthening and Fiber Reinforcement (opens in a new tab)

  5. Effect of fly ash particles on the mechanical properties and microstructure of aluminium casting alloy A535

    … fly ash were investigated in the as-cast and solution heat treated conditions. Microhardness measurements, Charpy impact testing, tensile testing, optical microscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), inductively coupled plasma/mass spectrometry …

    sask Repository record for Effect of fly ash particles on the mechanical properties and microstructure of aluminium casting alloy A535 (opens in a new tab)

  6. Additive Friction Stir Deposition of Al-Ce Alloys for Improved Strength and Ductility

    Additive friction stir deposition (AFSD) is a solid-state additive manufacturing (AM) technique that breaks down large constituent particles into more refined and uniformly disturbed microstructure. AFSD was used to print Al-Ce alloys. Current commercial Al-alloys upon elevated temperatures go …

    unt Repository record for Additive Friction Stir Deposition of Al-Ce Alloys for Improved Strength and Ductility (opens in a new tab)

  7. Selective Laser Melting of Nickel Superalloys: solidification, microstructure and material response

    … gradients during rapid melting, and during solidification certain nickel superalloys suffer from thermally induced micro-cracking which cannot be eliminated by process optimisation. This investigation sought to investigate and understand the root cause of micro-cracking in nickel superalloys …

    whiterose Download PDF for Selective Laser Melting of Nickel Superalloys: solidification, microstructure and material response (opens in a new tab)

  8. Compositional Effects on the Mechanical Properties and Deformation Mechanisms of Face-Centered Cubic High-Entropy Alloys

    … continually expanding away from the equiatomic solid solutions that dominated early work. The work presented in this dissertation utilizes two, intuitive, pseudo-binary HEA systems to investigate compositional effects on solid solution strengthening in highly concentrated alloys and twinning and …

    utk-theses Repository record for Compositional Effects on the Mechanical Properties and Deformation Mechanisms of Face-Centered Cubic High-Entropy Alloys (opens in a new tab)

  9. Microstructure and properties of magnetron sputtered CoCrNiAlTi coatings

    … incorporated into the CoCrNi matrix to promote solid-solution strengthening and modify phase stability. This thesis investigates the structure and properties of magnetron-sputtered (CoCrNi)86Al8Ti6 (at. %) coatings deposited on M2 tool steel substrates, focusing on the influence of nitrogen …

    unsw Repository record for Microstructure and properties of magnetron sputtered CoCrNiAlTi coatings (opens in a new tab) Embargoed

  10. ELECTRODEPOSITION OF NI-W AMORPHOUS AND NANOCRYSTALLINE ALLOYS

    … process while testing a new buffered pH solution, using the findings to investigate the Hall-Petch breakdown and deposition mechanism, or “induced codeposition”. Our new solution resulted in thicker, homogeneous deposits, as well as good quality deposits from acidic conditions with higher …

    nus Repository record for ELECTRODEPOSITION OF NI-W AMORPHOUS AND NANOCRYSTALLINE ALLOYS (opens in a new tab) Download file for ELECTRODEPOSITION OF NI-W AMORPHOUS AND NANOCRYSTALLINE ALLOYS (opens in a new tab)

  11. Predicting the Yield Strength of Aluminum Alloys Based on Composition

    … This is accomplished through the analyses of strengthening mechanisms common to aluminum, of which a novel semi-empirical model to predict precipitation strengthening is discussed. Solid solution strengthening and grain boundary strengthening are more simplistically considered but with …

    byu Repository record for Predicting the Yield Strength of Aluminum Alloys Based on Composition (opens in a new tab) Download PDF for Predicting the Yield Strength of Aluminum Alloys Based on Composition (opens in a new tab)

  12. The effects of irradiation on the creep and hardening behavior of crystalline and amorphous materials

    … During room temperature irradiation, a nanograin solid-solution strengthening mechanism with a linear compositional dependence is observed for the as-grown alloys and for the alloy samples irradiated to 0.5 dpa. Solid solution strengthening is the major strengthening mechanism for Cu99.5W0.5 at …

    uiuc Repository record for The effects of irradiation on the creep and hardening behavior of crystalline and amorphous materials (opens in a new tab)

  13. The effect of Cu, Zn, and Bi additions on the high-temperature deformation behavior of A1-3.0Mg alloys

    … The high magnesium content in AA5083 provides solid-solution strengthening and is necessary in obtaining required postformed strength. However, the high magnesium content makes processing difficult due to the large forces and high power required during rolling. This report studies an aluminum …

    texas Repository record for The effect of Cu, Zn, and Bi additions on the high-temperature deformation behavior of A1-3.0Mg alloys (opens in a new tab) Restricted access

  14. Synthesis, Microstructure, and Mechanical Behavior of Fe-Cu Composites

    … than expected by a simple rule of mixture due to solid-solution strengthening effects, which were confirmed by SEM and nanoindentation tests. Finally, the intergranular strain evolution during tensile testing is investigated using the neutron <em>in-situ</em> loading measurements.</p>

    ut-knoxville Repository record for Synthesis, Microstructure, and Mechanical Behavior of Fe-Cu Composites (opens in a new tab)

  15. Deformation processed IMC-reinforced metal matrix composites

    … matrix. The results indicate that the strengthening is derived from microstructural changes within the matrix due to the presence of the IMC particles, and solid solution strengthening due to the diffusion of Al from the reinforcing IMC phase into the Ti matrix. The increase in flow …

    vt Repository record for Deformation processed IMC-reinforced metal matrix composites (opens in a new tab)

  16. Microstructural influence on the effects of forward and reverse mechanical deformation in HSLA X65 and X80 linepipe steels

    … density. The effects of grain size and solid solution strengthening are a matter of debate in the literature and the combined effects of all five strengthening mechanisms have rarely been quantified. TEM investigations determined the dislocation densities to be between 2.2 x1014 m-2 - …

    birmingham Download PDF for Microstructural influence on the effects of forward and reverse mechanical deformation in HSLA X65 and X80 linepipe steels (opens in a new tab)

  17. The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium

    … through an aggregate of studies. The solid-to-solid diffusion bonding technique is used to fabricate combinatorial samples of Mg-Al-Zn ternary and Mg-Al, Mg-Zn, Mg-Y, Mg-Gd, and Mg-Nd binary systems. The combinatorial samples are subjected to structural and compositional …

    ucf Repository record for The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium (opens in a new tab)

  18. Effect of Preheating Condition on Strength of AA6060 Aluminium Alloy for Extrusion

    … precipitates and solutes conditions and their strengthening effects in the billet. However, the preheating temperature and extrusion speeds need to be sufficiently low enough to avoid hot tearing. This research starts to increase the ram speed by decreasing the Mg2Si content for precipitation …

    auckland-tech Repository record for Effect of Preheating Condition on Strength of AA6060 Aluminium Alloy for Extrusion (opens in a new tab)

  19. A study of precipitates in Mg-Sn alloys

    … next highest and Mg-6Sn-3Zn exhibits the most strengthening as well as work hardening. TEM observation of as-compressed pillars indicate that basal slip was activated and was the only activated slip system. The exact strengthening contributions of different precipitate types have been analysed …

    birmingham Download PDF for A study of precipitates in Mg-Sn alloys (opens in a new tab)

  20. The development of antibacterial and wear resistant Ti6Al4V surfaces by silver doping, selective laser melting and thermal oxidation.

    … Ag on the surface of Ti6Al4V substrate layer via solid solution strengthening. SLM was employed in an attempt to permanently incorporate Ag into Ti6Al4V. Secondly, the alloy underwent thermal oxidation treatment to improve its wear performance. SLM of various process parameters, thus various …

    birmingham Download PDF for The development of antibacterial and wear resistant Ti6Al4V surfaces by silver doping, selective laser melting and thermal oxidation. (opens in a new tab)

Page 1 of 4