Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"solution spinning"”.

  1. Influence of Lignin modification on PAN-Lignin copolymers as potential carbon fiber precursors

    … for fabrication of raw fibers using conventional solution spinning techniques.</p> <p>Lignin/polyacrylonitrile copolymers were successfully synthesized and characterized using FT-IR and NMR techniques. The thermal properties of the copolymers were studied by DSC and TGA analysis. The effect of …

    iastate Repository record for Influence of Lignin modification on PAN-Lignin copolymers as potential carbon fiber precursors (opens in a new tab)

  2. Macroscopically Aligned Carbon Nanotubes: Preparation and Flexible Thermoelectric Applications

    … method to produce fibers of aligned CNTs through solution spinning have been developed. We first discuss parameters behind CNT alignment formation during vacuum filtration. We found that parallel grooves pre-existing on the surface of the filter membrane dictates the direction of the resulting CNT …

    rice Repository record for Macroscopically Aligned Carbon Nanotubes: Preparation and Flexible Thermoelectric Applications (opens in a new tab)

  3. Optimization of Low-Temperature Solution-Processed Antimony Tin Oxide Thin-Film Field-Effect Transistor Fabrication Procedure for Neuromorphic Applications

    … work focuses on optimizing the fabrication of solution-processed antimony tin oxide (ATO) nanoparticle film on 100 nm silicon oxide passivation layer by varying concentration, rotation speed, duration, and annealing temperature. A 550 nm ATO layer with nonlinear behaviour can be made …

    carleton Repository record for Optimization of Low-Temperature Solution-Processed Antimony Tin Oxide Thin-Film Field-Effect Transistor Fabrication Procedure for Neuromorphic Applications (opens in a new tab)

  4. Synthesis and Characterization of Solution and Melt Processible Poly(acrylonitrile-co-methylacrylate) statistical copolymers

    … filaments were spun via hybrid dry-jet gel solution spinning. These very high molecular weight copolymers produced precursor fibers with tensile strengths averaging 954 MPa with an elastic modulus of 15.9 GPa (N = 296). The small filament diameters were approximately 5 'm. Results indicated …

    vt Repository record for Synthesis and Characterization of Solution and Melt Processible Poly(acrylonitrile-co-methylacrylate) statistical copolymers (opens in a new tab)

  5. Macroscopic neat single-wall carbon nanotube fibers

    … Fibers were extruded using a wet jet solution-spinning approach into diethyl ether without extensional drawing. Structural analysis showed them to be the highest aligned neat SWNT material produced to-date, with a revealing substructure of coagulated liquid crystalline domains. …

    rice Repository record for Macroscopic neat single-wall carbon nanotube fibers (opens in a new tab)

  6. Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies

    … various processing methods such as conventional solution spinning, gel spinning, and bi-component gel spinning. The detailed characterization exhibited that the smaller and longer CNT will reinforce polymer matrix mostly in tensile strength and modulus, respectively. Gel spinning combined with …

    gatech Repository record for Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies (opens in a new tab)

  7. Thermoelectric and Electronic Transport Studies of Ultrahigh-Conductivity Carbon Nanotube Fibers

    … properties of CNT fibers produced by the solution spinning method. We first measured thermoelectric quantities while tuning the Fermi energy and obtained a giant thermoelectric power factor. In probing the temperature and magnetic field dependence of the electrical conductivity of the …

    rice Repository record for Thermoelectric and Electronic Transport Studies of Ultrahigh-Conductivity Carbon Nanotube Fibers (opens in a new tab)

  8. MICROFLUIDIC ENCAPSULATION FOR SELF-HEALING MATERIAL AND INVESTIGATION OF ITS IMPACTS ON COMPOSITE PERFORMANCE

    … undamaged fracture toughness. A microfluidic solution spinning process is then developed to encapsulate Grubb's catalyst, the most expensive component of this particular material system, in a novel fibrous morphology. The continuous, on-chip fiber production allows for controllable fabrication …

    mtu Repository record for MICROFLUIDIC ENCAPSULATION FOR SELF-HEALING MATERIAL AND INVESTIGATION OF ITS IMPACTS ON COMPOSITE PERFORMANCE (opens in a new tab)

  9. Spinning of Nano Scale Reinforced Bio-Fibers (Cellulose Acetate) and Plasma Treated Structural Fibers

    … Polyvinylidene fluoride (PVDF) fibers. Solution spinning process, coupled with sonication, mixing and extrusion, was used to process the carbon nanotubes (CNTs) reinforced CA bio-composite fiber. And fabrication of heat and plasma treated PVDF fiber to enhance piezo-electric properties …

    gsu Repository record for Spinning of Nano Scale Reinforced Bio-Fibers (Cellulose Acetate) and Plasma Treated Structural Fibers (opens in a new tab)

  10. The production of ultrafine fibres using variations of the centrifugal spinning technique

    Centrifugal spinning uses high speed spinneret rotation to generate and elongate jets of polymeric material in to fine fibres. Variations of this basic technology has been used to form ultrafine fibres from: polypropylene (PP), ubiquitous in the nonwovens industry and a key material for nonwovens; …

    whiterose Download PDF for The production of ultrafine fibres using variations of the centrifugal spinning technique (opens in a new tab)

  11. Phase behavior and rheology of single-walled carbon nanotubes (SWNTs) in superacids with application to fiber spinning

    … and up to 100 m in length have been produced by solution spinning liquid crystalline SWNT-102% H2SO4 dispersions. The direct impact of liquid crystalline phase behavior and liquid crystal morphology on fiber microstructure was demonstrated by producing fibers from SWNTs dispersed in 102% H2SO4 …

    rice Repository record for Phase behavior and rheology of single-walled carbon nanotubes (SWNTs) in superacids with application to fiber spinning (opens in a new tab)

  12. Hollow fiber poly(vinyl chloride) (PVC) gas separation membranes prepared by dry/wet spinning production methods

    … chloride) (PVC) have been produced via a dry/wet spinning method for end use in ozone/oxygen gas separations. Ambient temperature production mechanisms were initially targeted. A number of spin runs were undertaken changing aspects of the dope solution and the spinning conditions but produced only …

    strathclyde Repository record for Hollow fiber poly(vinyl chloride) (PVC) gas separation membranes prepared by dry/wet spinning production methods (opens in a new tab)

  13. Fabrication and Testing of Nanoscale Reinforced UHMWPE Fibers and Their Composites

    … (UHMWPE) fibers and their composites. The solution spinning method was used in the study to fabricate three different types of fibers: UHMWPE fibers, UHMWPE + 2 wt.% SWCNT fibers and UHMWPE + 10 wt.% PVP/PVDF coated fibers. Strain hardening was performed on the produced fibers, and …

    gsu Repository record for Fabrication and Testing of Nanoscale Reinforced UHMWPE Fibers and Their Composites (opens in a new tab)

  14. Processing and Characterization of Nanocomposite Fibers and Nanofibers for Structural and Biomedical Applications

    … carbon nanotubes (SWCNT) were fabricated using a solution spinning process. Polyethylene-graft-Maleic Anhydride (PE-g-MAH) was used as a compatibilizer to modify the interaction of the immiscible polymer phases. Comparative characterization studies of fibers produced both with and without the …

    gsu Repository record for Processing and Characterization of Nanocomposite Fibers and Nanofibers for Structural and Biomedical Applications (opens in a new tab)

  15. POLY (ACRYLONITRILE-CO-1-VINYLIMIDAZOLE): A NEW MELT PROCESSABLE CARBON FIBER PRECURSOR

    … stiffness and lightweight. The replacement of solution-spinning process by melt-spinning process is one of the major approaches to make cost effective carbon fiber. In recent years, researchers have explored the possibilities to synthesize melt processable carbon fiber precursors, but their …

    clemson Repository record for POLY (ACRYLONITRILE-CO-1-VINYLIMIDAZOLE): A NEW MELT PROCESSABLE CARBON FIBER PRECURSOR (opens in a new tab)

  16. HYDROGEN SEPARATION AND CARBON CAPTURE BY CARBON MOLECULAR SIEVE MEMBRANES DERIVED FROM INTERFACIALLY POLYMERIZED POLYARAMIDS

    … hollow fiber membranes were fabricated by solution spinning of an uncrosslinked polyaramid precursor synthesized by stirred interfacial polymerization, which gave polyaramid-derived CMS membranes following pyrolysis. The formation, pore structure, and transport properties of the novel …

    maryland Repository record for HYDROGEN SEPARATION AND CARBON CAPTURE BY CARBON MOLECULAR SIEVE MEMBRANES DERIVED FROM INTERFACIALLY POLYMERIZED POLYARAMIDS (opens in a new tab)

  17. Establishing the Conditions for Stable Extrusion of Melt Spun Polyacrylonitrile with Water Based Plasticizers

    … to carbon fiber. Compared to the traditional solution spinning process, the melting spinning process of PAN is less costly and can further reduce the price of PAN fiber. This dissertation is concerned with the objective of establishment of conditions (temperature, plasticizer type, and …

    vt Repository record for Establishing the Conditions for Stable Extrusion of Melt Spun Polyacrylonitrile with Water Based Plasticizers (opens in a new tab)

  18. The Development of Structural Hollow Carbon Fibers from a Multifilament Segmented Arc Spinneret: Precursors, Oxidation, and Carbonization

    … methods to date rely on multicomponent spinning with sacrificial polymers and complex spinneret geometries. A more simplistic, scalable, and economical approach is the use of a segmented arc - shaped spinneret. Traditionally, segmented arc spinnerets have been used for melt or dry …

    uky-thes Repository record for The Development of Structural Hollow Carbon Fibers from a Multifilament Segmented Arc Spinneret: Precursors, Oxidation, and Carbonization (opens in a new tab)

  19. Dissolution, processing and fluid structure of graphene and carbon nanotube in superacids: The route toward high performance multifunctional materials.

    … and graphite dissolve in superacids and these solution can processed into macroscopic objects. Chapter 2 reviews neat CNT fiber literature. Specifically, the two main processing methods —solid– state and solution spinning — are discussed. CNT aspect ratio and fibers structure are identified as …

    rice Repository record for Dissolution, processing and fluid structure of graphene and carbon nanotube in superacids: The route toward high performance multifunctional materials. (opens in a new tab)

Page 1 of 2