Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"sonotrode"”.
-
From sonotrode to tube transducer for flow-based sonoprocessing: ultrasonically-enhanced metal recovery from electronic waste
… green-solvent recycling processes. By combining sonotrode-induced acoustic cavitation with Ethaline-DES, the delamination rate of TCM was increased by more than thirtyfold compared with passive treatment without sonication. However, the development of high-throughput applications for …
-
Ultraschallschweißen von Al/Cu-Verbindungen: Bindungsbildung, Sonotrodenverschleiß und ihre Wechselwirkungen
… Bildverarbeitungstechnik. Die Auswirkungen des Sonotrodenverschleißes auf den Schweißprozess und auf die Verbindungsqualität wurden mit einer „künstlich“ verschlissenen Sonotrode untersucht. Durch die Verwendung alternativer Sonotrodenwerkstoffe und die Anpassung von Prozessparametern kann die …
-
On the fundamental mechanisms & optimisation of ultrasonic assisted liquid phase exfoliation of two dimensional nanomaterials
… solution temperature, input transducer power, sonotrode geometry and operating frequency. Before these parameters could be considered, the first task was to interpret and understand the interactions between cavitation and bulk layered materials and hence to explain the mechanisms of ULPE. …
-
Evaluation of optimum processing parameters for joining different dental PEEK grades via ultrasonic welding
… the welding quality has been evaluated, such as sonotrode geometry and the surface roughness of the samples to be welded. As a final step, the possibility of assembling PEEK plates of the exact geometry of ac-tual dental PEEK prosthesis combining different PEEK compounds has been carried out. …
-
Acoustic cavitation characterisation in viscous deep eutectic solvents for optimisation of sonoprocessing of technology critical materials
… processing, cavitation generated at the tip of a sonotrode as a function of input power is required. This work is the first comprehensive investigation of cavitation in DESs, for process optimisation to enhance precious metal recycling. Detailed characterisation of the cavitation generated by two …
-
Utilization of Ultrasonic Consolidation in Fabricating Satellite Decking
… due to its ability to resist vibration from the sonotrode and provide adequate support for pressure induced by the sonotrode. Support materials for enhancing the bonding of the facings to the core were investigated but did not lead to implementation. A CAD model was created to integrate the …
-
Ultrasound-mediated Gene Transfer to Enhance Bioremediation of Contaminated Water
… to deliver focussed ultrasound through the sonotrode directly into an aqueous bacterial sample. This sonotrode was designed to operate at the optimum frequency for UGT of 27.5 kHz determined using the preliminary apparatus and has enabled the application of UGT to > ~50 ml samples, …
-
Ultrasonic Spot Welding of Thin Walled Fibre-Reinforced Thermoplastics
… es durch Schweißen der Laminate zwischen einer Sonotrode und einem Amboss möglich war, eine lokalisierte Wärme durch Reibung zu erzeugen in dem die Sonotrode eine größere Kontaktfläche mit dem Laminat als mit dem Amboss aufwies. In der Anfangsphase des Schweißens wurden die Grenzflächenschichten …
-
Dislocation Density-Based Finite Element Method Modeling of Ultrasonic Consolidation
… acoustic softening, (4) surface texture of the sonotrode and initial mating surfaces, and (6) presence of oxide-scale at the mating surfaces, which further contribute significantly specifically to the grain substructure evolution at the interface and to the anisotropic bulk deformation away from …
-
Ultrasound propagation in polymer melts and its use for the dispersion of layered nanoparticle in polymer during the extrusion process
… this, ultrasound application via an ultrasonic sonotrode in both partially degassed and non-degassed polydimethylsiloxane, at three different viscosities (5, 30, and 300 Pa.s), was studied using an optical camera. A velocity analysis was also performed using the particle image velocimetry (PIV) …
-
Prozesscharakterisierung des Kompaktierungsverhaltens metall-ultraschallgeschweißter Verbindungen aus Cu-ETP und Aluminium-Fahrzeugleitungen
… primär im Kontakt zwischen Fahrzeugleitung und Sonotrode auftritt. Vibrometrische Untersuchungen offenbarten ein charakteristisches Schwingungsverhalten des Ambosses, das Ansätze für eine fortgeschrittene Prozessüberwachung bietet. Ein innovatives, auf dem thermoelektrischen Effekt basierendes …
-
Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys
… (~20kHz) via a specially designed block sonotrode attached to a 1kW piezoelectric transducer-generator system. The trials on nickel based superalloys were carried out using open structured alumina wheels whereas γ-TiAl specimens were machined with conventional silicon carbide and single …
-
Optical Fibre Sensors applied to condition and structural monitoring for the marine and rail transport sectors
… which the sensors were fixed was excited with a sonotrode, at a resonant frequency of 19.5 kHz. The signal reflecting that acoustic excitation was captured by the FBG sensors designed and implemented and their performance has been shown to be comparable with that from conventional, …
-
Design of Ultrasonic Processing Device for Aluminum Surfaces
… the design research focuses on developing a Sonotrode or Horn capable of amplifying and focusing ultrasonic oscillations onto a sample surface. The development includes iterative analytical, numerical, and experimental design to achieve the final result. MatLab and Comsol software were used …
-
Rapid electric-field molecular fingerprinting
… die optische Verzögerung mithilfe einer Sonotrode. Ein Teil der optischen Leistung des 16-fs-Pulses wurde als Gate für die elektro-optische Abtastung genutzt. Die Gate-Pulse wurden an der Sonotrode reflektiert, um schnelle Verzögerungsscans zu ermöglichen, bei der 38.000 Spuren der …
-
Analysis of Acoustic Cavitation Phenomenon Using Acoustic Emission Technique and Numerical Modelling of the Phenomenon
… the AE threshold were carried out using a sonotrode (tip diameter: 16 mm) with the nominal working frequency of 20 kHz and maximum power output of 1 kW mimicking the soft paint tests. AE signals from acoustic cavitation were measured and analysed. To support the experiment and to get more …
-
Mechanisms of Microstructure Formation Under the Influence of Ultrasonic Vibrations
… fragmentation, and only dendrites close to the sonotrode were fragmented. However, application of ultrasound with frequencies that are several times higher than the current industrial practice could substantially increase dendrite fragmentation. Appearance of fractional harmonics has also been …
-
Understanding the Bonding Process of Ultrasonic Additive Manufacturing
… between the high frequency excitations of the sonotrode and the built feature. While the previous investigations have qualitatively explained the cause of the height to width ratio problem by showing the change of dynamic states as new layers of foils are deposited, they do not explain how the …
-
Enhancing pharmaceutical micropollutant identification in biosolids through derivatisation and advanced chromatographic techniques
… response. Implementation of ultrasound via a sonotrode was optimised using design of experiment and was found to significantly reduce extraction (5 mins) and derivatisation time (30s), reducing overall sample preparation time by 37%. A significant reduction (97%) in solvent consumption was …
Page 1 of 2