Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 826 for “"sorbent"”.
-
Sorbent Nanotechnologies for Water Cleaning
… performance. Recently, the performance of nanosorbents have been studied in order to removal pollutants. Nanosorbents utilize the ultra-high reactive surface of nanoparticles for rapid, effective and even permanent sequestration of heavy metals from water and air, thus showed promising results …
-
Comparison Of Fabricated Carbon Nanotube Sorbent Felts And 3M Charcoal Sorbent Wafers To Assess Passive Sampling
… this method uses activated charcoal as the sorbent and samples are analyzed by chemical or thermal desorption. This research explores the use of carbon nanotubes in the form of a felt as a sorbent for passive sampling by comparing the mass uptake and percent yield to that of the 3MTM Organic …
-
Kinetic mechanisms of diffusion in sorbent solids
… theory of diffusion of adsorbing gases in porous sorbent solids is extended by various combinations of free (gaseous) diffusion, Knudsen diffusion, surface diffusion, interstitial diffusion, and grain boundary diffusion. Both ordinary and thermal diffusion are investigated using the thermodynamics …
-
Ceria-zirconia oxide high temperature desulfurization sorbent
… gases using ceria and ceria-zirconia sorbents is the primary object of this dissertation research. If H2S concentration is reduced to less than 1 ppmv the product gas may be used with fuel cells and downstream catalytic process. CeO2 is reduced to a non-stoichiometric oxide, which is …
-
Development of a sorbent for carbon dioxide
… stability and performance of calcium based sorbents, a cost effective method is still needed for industrial applications. Therefore, two promising methods for improving the cyclic stability were selected for further investigation. One method is to optimize the preparation conditions applied …
-
Sorbent attrition in fluidized carbon dioxide capture systems
… for three proposed carbon dioxide capture sorbents for fluidized power generation systems was investigated. The sorbents are crushed limestone, lime-based pellets containing calcium aluminate cement binder, and the same pellets with a mesoporous silica coating replacing the binder. The …
-
Applications of Membrane Extraction with a Sorbent Interface
Membrane extraction with a sorbent interface (MESI) is a sample preparation technique with a rugged and simple design allowing for solvent-free, on-line performance. When coupled to gas chromatography (GC), MESI is an extremely promising tool for the analysis of volatile organic compounds (VOCs), …
-
An Extended Procedure for Evaluating Oil Sorbent Materials
… laboratory procedures of various researchers for sorbent comparison; it also unifies them for utilization as initial phases of more extensive tests. The variables of temperature and sorbent/oil mixing are observed in the extended tests and the laboratory method associated with them is proposed as …
-
The disposal of spilled oils and sorbent materials
This report is intended to provide guidance and methods for the proper disposal of spilled used oils, crude oils, their associated sorbant materials and oil soaked debris. The impact of an oil spill on the environment has far reaching consequences. The management of oil should be given the highest …
-
Contaminant biodegradation in the presence of a sorbent
Thesis (Ph. D.)--Michigan State University. Department of Crop and Soil Sciences, 1999
-
Phosphorus Removal and Recovery from Wastewater using Sorbent Technologies
… This study evaluated fourteen commercial sorbents for potential phosphorus recovery from synthetic wastewater (SWW) using batch testing. Commercially available sorbents (e.g. ion exchange resins (IEX), granular ferric oxide, hybrid IEX and activated alumina) were obtained from several …
-
Sorption of arsenic species using chitosan based biopolymer sorbent materials
… biopolymer sorbent materials. The chitosan prepolymer investigated had a low molecular weight (~ 50,000-190,000 gmol-1) and high molecular weight (~ 150,000-375,000 gmol-1) whereas glutaraldehyde was used as the cross linking agent for each biopolymer. Two …
-
Sorbent Enrichment Performance of Aromatic Compounds from Diluted Liquid Solution
Sorbent enrichment is treated as the extend sample preparing method from liquid extraction. The theories of liquid extraction also extend to sorbent enrichment, which is based on the distribution equilibrium. With the development of advanced materials, sorbents have been improved dramatically in …
-
Selenium Determinations, Nanoparticle Sorbent Analysis And Nanoparticle Catalysts For Chemiluminescence
… not be detected, thus the need to separate the sorbent from the free metal ions was eliminated. All three metal ions in this study adsorbed in a nearly one-to-one ratio with the carboxylic acid groups at high pH (∼1000 μmol g-1). The effect of pH on adsorption behavior was also investigated. The …
-
Development of a calcium-based sorbent for hot gas cleanup
… to the development of a superior calcium-based sorbent for hot gas cleanup in integrated gasification combined cycle (IGCC) power generation systems. The preparation, characterization and testing of potential sorbents for removing H2S and COS from hot gas were under investigated. Alumina, …
-
Investigation of Silver Nitrate–Impregnated Alumina as an Alternative Iodine Sorbent
… used nuclear fuel could require capture. Solid sorbents for this application include silver mordenite (AgZ) and silver nitrate–impregnated alumina (AgA). AgA has been studied previously under simulated possible reprocessing conditions to assess its effectiveness as an iodine sorbent, and those …
-
DEVELOPMENT OF BIOPOLYMERS AND THEIR MODIFIED FORMS AS SUSTAINABLE SORBENT MATERIALS
… of biopolymers and their modified forms as adsorbents for fractionation of chemical mixtures such as water/ethanol in binary systems. The short term goals of this thesis are related to the synthesis, characterization, and evaluation of the sorption properties of biopolymers and their modified …
-
Sorptive Removal of 4-Aminophenol from Water Using a Polymeric Sorbent
… 0.25 wt% to 2.0 wt% NaCl respectively. The PEBA sorbent can be regenerated. Regeneration of the PEBA sorbent is highly effective with water, and even more effective with 99% isopropanol which confirms its reuse.
Page 1 of 42