Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 123 for “"spall"”.

  1. Spall Characteristics of Additively Manufactured Stainless Steel

    … fabrication, characterization, plate impact spallation testing, experiment modeling, and post-mortem analysis of 316L SS samples fabricated using laser powder bed fusion (LPBF). Connections and correlations were established using a variety of data sets.</p> <p>A build-impact orientation study …

    utk-theses Repository record for Spall Characteristics of Additively Manufactured Stainless Steel (opens in a new tab)

  2. Design of Materials Tolerant to Dynamic Tensile Spall Failure

    Materials tolerant to dynamic tensile or “spall” failure are of interest for applications involving high-velocity impact and blast loading. Metals and polymers generally have favorable responses to such extreme conditions and are therefore useful materials in shock- absorbing applications, such as …

    gatech Repository record for Design of Materials Tolerant to Dynamic Tensile Spall Failure (opens in a new tab)

  3. Femtosecond two-pulse laser spall approach for metals and ceramics

    Spall failure in materials occurs when shockwaves, propagating through a material, interact leading to failure once the generated hydrostatic tensile stress exceeds the material’s strength. In this thesis, a novel femtosecond two-pulse laser approach is introduced where the front and back surface …

    ubc Repository record for Femtosecond two-pulse laser spall approach for metals and ceramics (opens in a new tab) Download PDF for Femtosecond two-pulse laser spall approach for metals and ceramics (opens in a new tab)

  4. Effects of Property Gradients on Spall Damage: A Multiscale Investigation

    Spall damage nucleation is incredibly sensitive to microstructure (1; 2). This presents a unique challenge because both high-strain-rate effects and microstructural features can be difficult, even impossible, to capture experimentally, and prove to be challenging to model in simulations as well. …

    tamu Repository record for Effects of Property Gradients on Spall Damage: A Multiscale Investigation (opens in a new tab) Embargoed until 2026-12-01

  5. Effects of microstructure on the spall behavior of aluminum-magnesium alloys

    This research focuses on the spall properties of aluminum-magnesium (Al-Mg)alloys.Aluminum alloy 5083 (Al 5083) was used as a model alloy for the work performed in this study. Al-Mg alloys represent a light-weight and corrosion resistant alloy system often used in armor plating. It is desirable to …

    gatech Repository record for Effects of microstructure on the spall behavior of aluminum-magnesium alloys (opens in a new tab)

  6. 3D CHARACTERIZATION OF MICROSTRUCTURAL EFFECT ON SPALL VOID NUCLEATION IN POLYCRYSTALLINE MAGNESIUM

    … with a focus on investigating the nucleation of spall voids in polycrystalline magnesium. We present here how microstructural characteristics influence magnesium spall behavior. Using a laser-driven micro-flyer plate impact setup, we examined the spall response to varying peak shock stresses, …

    jhu Repository record for 3D CHARACTERIZATION OF MICROSTRUCTURAL EFFECT ON SPALL VOID NUCLEATION IN POLYCRYSTALLINE MAGNESIUM (opens in a new tab) Embargoed until 2027-12-01

  7. Rapid Concrete Pavement Spall Repair Using 3D Scanning and 3D Printing Technologies

    … often find it difficult to decide when palm-size spall damage should be repaired. Many government agencies wait until the damaged sections become severe enough to justify a road closure. This dissertation presents a novel idea for speeding up the repair process for palm-size spall damage of …

    tamu Repository record for Rapid Concrete Pavement Spall Repair Using 3D Scanning and 3D Printing Technologies (opens in a new tab)

  8. Role of offcut and spall direction in surface morphology of spalled (110) GaAs, The

    … is hindered by high substrate cost. Controlled spalling of substrates provides a path towards substrate reuse with potential to reduce manufacturing cost. Controlled spalling works by propagating a sub-surface crack, parallel to the substrate surface, by applying an external force to a …

    colo-mines Repository record for Role of offcut and spall direction in surface morphology of spalled (110) GaAs, The (opens in a new tab)

  9. Determination of dynamic response of ceramics and ceramic-metals under shock compression and spall

    … (HEL) of GC-915 was found to be 0.935 GPa and spall strength of approximately 2 GPa was also measured.

    nps Repository record for Determination of dynamic response of ceramics and ceramic-metals under shock compression and spall (opens in a new tab)

  10. An Experimental Investigation of Spall Fracture in Neat Epoxy and an Epoxy/Carbon Nanotube Composite

    The spall strength of a material can be used to parameterize its ability to resist tensile failure under high-strain-rate loading. Dynamic failure in an assortment of representative materials was studied. A focus was placed on characterizing the mechanical properties of a polymer-matrix composite. …

    carleton Repository record for An Experimental Investigation of Spall Fracture in Neat Epoxy and an Epoxy/Carbon Nanotube Composite (opens in a new tab)

  11. A Study of Particle Surface Effects on the Spall Strength of Particle-Reinforced Polymer Matrix Composites

    … to characterize the dynamic tensile strength (spall strength) of a material. In particular, prior work has observed that the presence of secondary phases influences the overall material, typically reducing spall strength. In the study presented here, surface effects were investigated using …

    carleton Repository record for A Study of Particle Surface Effects on the Spall Strength of Particle-Reinforced Polymer Matrix Composites (opens in a new tab)

  12. An analytical evaluation of spall suppression of impulsively loaded aluminum panels based on a one dimensional stress wave propagation model

    … method allows concentration on one aspect of spalling by introducing simplifying assumptions into the governing equations of continuum physics. Then with this information, means to suppress the spall can be developed in order to design or modify an armored vehicle configuration to withstand …

    nps Repository record for An analytical evaluation of spall suppression of impulsively loaded aluminum panels based on a one dimensional stress wave propagation model (opens in a new tab)

  13. A particular type of cobble spall tool from the Canadian Plains : multi-variant analysis of early-middle period Eldon Unifaces

    … and British Columbia. It is the cobble spall tools from British Columbia that has the most striking similarity in morphology and manufacturing strategy. There are also important differences like in how Eldon unifaces are more heterogeneous and circumscribed to a shorter period of time …

    sask Repository record for A particular type of cobble spall tool from the Canadian Plains : multi-variant analysis of early-middle period Eldon Unifaces (opens in a new tab)

  14. Mechanics of High-Rate Damage in Polymers

    … conditions. A major focus of this work is on spall failure, a form of high-rate tensile failure caused by the interaction of shock rarefaction waves. I advance our understanding of spall in polymers along three tracks - laser-driven micro-flyer impact (LMI) experiments on polycarbonate, …

    jhu Repository record for Mechanics of High-Rate Damage in Polymers (opens in a new tab) Embargoed until 2027-12-01

  15. Effect of mesoscale inhomogeneities on planar shock response of materials

    In all previous spall models, the source of spall failure in metals either comes from damage at the grain boundary or from void nucleation, growth, and coalescence. However, it has been observed in experiments that both phenomena occur in Aluminum 6061-T6, which is termed “combined failure” for the …

    gatech Repository record for Effect of mesoscale inhomogeneities on planar shock response of materials (opens in a new tab)

  16. Feasibility of a New Technique to Determine Dynamic Tensile Behavior of Brittle Materials

    … performed with a Kolsky bar and is known as the spall technique. The validity of the data from the spall technique is highly debated because the necessary boundary conditions for the experiment are not satisfied. By using a technique called pulse shaping, a new “controlled” spall technique was …

    unt Repository record for Feasibility of a New Technique to Determine Dynamic Tensile Behavior of Brittle Materials (opens in a new tab)

  17. Vibration Signature Analysis for Gearbox Spalling Detection

    … efficient and effective techniques for gear spalling detection. Most of them rely on predefined spalling and results are not representative in particular cases. This thesis presents a progressive development of the techniques to detect an irregular spall in a gearbox. Results show that …

    carleton Repository record for Vibration Signature Analysis for Gearbox Spalling Detection (opens in a new tab)

Page 1 of 7