Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 107 for “"spark gap"”.
-
Spark Gap
"Spark Gap" is an invisible electrical force made visible in spaces between things. This usually describes the space of air between two conductors; a non-conductive gap in an otherwise complete electric circuit, across which a quick luminous disruptive electrical discharge occurs. This interstitial …
-
An electron beam triggered spark gap
The triggering of a high-voltage gas-insulated spark gap by an electron (e) beam has been investigated. Rise times of approximately 2.5 ns with sub-nanosecond jitter (~0.2 ns) have been obtained for 3 cm gaps charged at voltages as low as 50 percent of the self-breakdown voltage (varied up to 0.5 …
-
Laser triggered spark gap using fiber optic transmission
… ruby laser pulse which triggers a high voltage spark gap. The spark gap is a gas switch on a water dielectric Blumlein generator which is pulse charged by a three stage Marx bank. Typical operating parameters for the spark gap are: 2 cm gap, 2700 Torr pressure, Ar-N^ gas mixture, and a charging …
-
A study of small spark gap closure characteristics
Not Available
-
Theoretical investigation of a laser triggered spark gap
A model of a spark gap used as a shorting switch in a Blumlein pulse power system has been developed. The model is separated into a pre-breakdown kinetic model and a post-breakdown fluid model. The kinetic model is used to simulate streamer formation, and the fluid model is used to simulate the …
-
An investigation of electron beam initiated spark gap breakdown
… gases. An electron beam was fired axially into a gap formed by an interruption in the center conductor of the coaxial system to initiate a discharge. Photographic techniques were used as diagnostics to examine the physical processes occurring in the discharge. Open shutter photographs revealed …
-
Voltage recovery studies for a high energy spark gap
… the voltage recovery vs time for a high energy spark gap has been performed with N2, air , SF5 , and mixtures of these as filler gases and with copper-tungsten, stainless steel, and graphite electrodes. The goal of the work was to determine the main parameters affecting the free recovery (no gas …
-
Investigations of a spark gap with mercury-jet electrodes
A spark gap with mercury jets as electrodes has been developed. Investigations show that the gap can be triggered reliably by photons from a trigger spark with a jitter in the formative time lags less than 0.2 µsec. To overcome uncertainties in the breakdown conditions produced by surface waves on …
-
Investigation of shock pressures in high current spark gap electrodes
… switch performance. The switches under study are spark gaps with graphite electrodes. The spark gap closes when an electric arc forms between the electrodes, and current conduction begins Strong mechanical forces are generated as the arc forms and impact the electrodes. The purpose of this …
-
Some investigations into spark gap recovery in air and hydrogen
… into several aspects of the recovery of a spark gap consisting of 6 mm. diameter, flat tungsten electrodes, after an initial discharge of 32 kamp. maximum, and duration 11 sec. The controlling effect of electrode heat transport on the intermediate recovery of the spark gap was demonstrated …
-
An Investigation of Overvoltage Effects on a Gas-Blown Spark Gap
… recovery characteristics observed in gas-blown spark gaps. Previous investigations have reported a two-stage recovery process in self-break, pulse-charged, gas-blown spark gape in which the spark gap recovers first to an intermediate breakdown strength before recovering to the undisturbed …
-
Arc current, voltage, and resistance in a high energy, gas-filled spark gap
A spark gap was designed and constructed to measure the time dependent arc resistance. The arc current was measured and the arc resistance calculated using the current and the other circuit parameters. Typical operating parameters were: unipolar pulse, 35 kV breakdown voltage, 30 kA peak current, …
-
Evaluation of a high-pressure, coaxial spark gap for pulsed ring-down applications
… jitter performance of a high pressure, coaxial spark gap for use in pulse ring-down applications is presented. Additional comparisons with trigatron style triggering are also presented. The spark gap is triggered by field distortion of a center plane electrode. The switch was tested up to 75 …
-
A computerized system for the acquisition and alaysis of spark gap breakdown voltage data
… self- breakdown voltage data from one of several spark gap switches in the Texas Tech Plasma and Switching Laboratory. The system computer programs digitize the capacitor voltage waveform , find the peaks (which correspond to the self-breakdown voltages), store these data on a floppy disk, and …
-
The effect of space charge induced by an electon beam on spark gap operation
… charge on the insulating property of a gas in a spark gap is presented. The characteristics of the gas transition from insulator to conductor show strong dependence on the amount and location of the space charge introduced. Investigations of the delay time and the characteristics of the …
-
Jitter and recovery rate of a triggered spark gap with high pressure gas mixtures
… to 100 Hz in burst mode. A hermetically sealed spark gap with a Kel-F – PCTFE (PolyCholoroTriFluoroEthylene) lining is used to house the switch and high pressure gas. It is shown that jitter is strongly dependent on the triggering technique, as well as the trigger magnitude, with ionization …
Page 1 of 6