Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"spark timing"”.

  1. The Optimization of Data Acquisition, Fuel Flow, and Spark Timing Control for a Synthesis Gas-Engine-Generator System

    … experimental optimization of propane fuel and spark control for the engine, and directions for future research involving this setup. Chapter Two describes recent changes in the Syngas Rig including the renovation and replacement of various components to enhance the efficiency of the system and …

    ku Repository record for The Optimization of Data Acquisition, Fuel Flow, and Spark Timing Control for a Synthesis Gas-Engine-Generator System (opens in a new tab)

  2. Implementable Changes to a Large-Bore Single Cylinder Natural Gas Engine for Improved Emissions Performance

    … considers the implementable changes of variable spark timing and reduced cooling fan loads on a natural gas reciprocating-piston internal combustion engine. Emissions are observed over a range of engine speed, engine load, and spark timing conditions. While active engine controls reduce fuel …

    tamu Repository record for Implementable Changes to a Large-Bore Single Cylinder Natural Gas Engine for Improved Emissions Performance (opens in a new tab)

  3. Investigation to direct ethanol injection in spark ignition gasoline engines

    … reduction. Engine performance at original engine spark timing setting (15 CAD BTDC), knock margin and lean conditions was carried out to assess EDI+GPI’s effectiveness. The impacts of EDI+GPI on engine control parameters, such as start of injection (SOI) timing and spark timing, were also …

    uts Repository record for Investigation to direct ethanol injection in spark ignition gasoline engines (opens in a new tab)

  4. An image-based analysis of stratified natural gas combustion in a constant volume bomb

    Current stoichiometric spark-ignited engine technologies require costly catalytic converters for reductions in tailpipe emissions. Load control is achieved by using a throttle, which is a leading contributor to reductions in efficiency. Spark-ignited lean burn natural gas engines have been proven …

    ubc Repository record for An image-based analysis of stratified natural gas combustion in a constant volume bomb (opens in a new tab) Download PDF for An image-based analysis of stratified natural gas combustion in a constant volume bomb (opens in a new tab)

  5. Reduction of methane emissions through in-cylinder methods on a lean-burn four-stroke natural gas engine

    … This strategy involved advancing the engine's spark timing to hopefully increase the temperature and pressure in the cylinder to have the end-gas auto-ignite and thus burn more fuel that would otherwise become methane slip. This research also incorporates installing a G3516J engine at the …

    colostate Repository record for Reduction of methane emissions through in-cylinder methods on a lean-burn four-stroke natural gas engine (opens in a new tab)

  6. Stochastic knock detection model for spark ignited engines

    … (SKD) method for combustion knock detection in a spark-ignition engine using a model based design approach. Knock Signal Simulator (KSS) was developed as the plant model for the engine. The KSS as the plant model for the engine generates cycle-to-cycle accelerometer knock intensities following a …

    mtu Repository record for Stochastic knock detection model for spark ignited engines (opens in a new tab)

  7. Data driven based estimation and control for automotive systems

    … statistic properties. A two-control-parameter (spark timing and intake valve timing) case is demonstrated for optimizing two competing objectives (knock intensity (KI) and fuel economy).A complete borderline knock control structure is proposed and divided into three parts. The first part is …

    msu Repository record for Data driven based estimation and control for automotive systems (opens in a new tab)

  8. Untethered Microcombustion Systems and Pump Control Development for Soft Robotics

    … The thesis details the optimization of a spark timing system using analog circuits to reduce power consumption and weight, alongside the development of a pump control system employing a motor driver and PCB boost converter for smooth hydraulic movements in underwater robotics, like tail …

    cornell Repository record for Untethered Microcombustion Systems and Pump Control Development for Soft Robotics (opens in a new tab)

  9. A Study Model Predictive Control for Spark Ignition Engine Management and Testing

    Pressure to improve spark-ignition (SI) engine fuel economy has driven thedevelopment and integration of many control actuators, creating complex controlsystems. Integration of a high number of control actuators into traditional map basedcontrollers creates tremendous challenges since each actuator …

    clemson Repository record for A Study Model Predictive Control for Spark Ignition Engine Management and Testing (opens in a new tab)

  10. Combustion and emission characteristics of ammonia blended fuels in a spark-ignited engine

    … of ammonia blended fuels are investigated for spark ignited engines. Gasoline and heptane are explored as combustion promoters for ammonia. Experiments have been conducted on a single cylinder research engine fitted with an electronic dual fuel injection system. A parametric analysis has been …

    uoit Repository record for Combustion and emission characteristics of ammonia blended fuels in a spark-ignited engine (opens in a new tab)

  11. MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED

    … parameters in Gasoline Direct Injection (GDI) Spark Ignition (SI) engines for fuel and combustion control. However, their real-time prediction for transient engine operations is complicated, especially when concerning variable valve timing. A dynamic cycle-by-cycle control-oriented discrete …

    mtu Repository record for MODEL-BASED ENGINE-OUT EMISSIONS ANALYSIS FOR A GASOLINE TURBOCHARGED DIRECT INJECTION SPARK-IGNITED ENGINE IN ELEVATED HEV CRANKING SPEED (opens in a new tab)

  12. Development of a High Speed Data Acquisition System for Spark Ignition Engine

    … as engine speed, crank angle, air mass intake, spark timing, injection timing, and intake temperatures at different engine speed set points while running gasoline and then a gasoline and ethanol mix (E85). From which experimental coefficients were determined necessary for the model.

    gsu Repository record for Development of a High Speed Data Acquisition System for Spark Ignition Engine (opens in a new tab)

  13. Synchronous, Simultaneous Optimization of Ignition Timing and Equivalence Ratio in a Gas-Fueled Spark-Ignition Engine

    … optimizes the equivalence ratio and spark timing of a spark ignition engine for maximum thermal efficiency was conceived and tested This adaptive control makes it possible to follow changing engine requirements because of engine differences due to manufacturing tolerances, wear, or …

    umn Repository record for Synchronous, Simultaneous Optimization of Ignition Timing and Equivalence Ratio in a Gas-Fueled Spark-Ignition Engine (opens in a new tab)

  14. Effect of spark advance and fuel on knocking tendency of spark ignited engine

    Knock, in spark ignition engine is the combustion caused by the autoignition of the fuel-air mixture. It is the phenomenon that limits engine performance and thermal efficiency. Knock also has an adverse effect on emissions and fuel economy. Engine designers target engines with maximum power and …

    mtu Repository record for Effect of spark advance and fuel on knocking tendency of spark ignited engine (opens in a new tab)

  15. Combustion and emissions of a direct injection gasoline engine using EGR

    … and emissions of a spray-guided direct-injection spark-ignition (DISI) engine using exhaust gas recirculation (EGR). The impact of EGR type, swirl and tumble intake airflows, compression ratio and fuel type were also investigated. EGR addition resulted in significant fuel consumption improvements …

    birmingham Download PDF for Combustion and emissions of a direct injection gasoline engine using EGR (opens in a new tab)

  16. THE SETUP AND EXPERIMENTAL RESULTS OF DIRECT WATER INJECTION IN A SPARK IGNITED NATURAL GAS ENGINE AT VARYING COMPRESSION RATIOS

    … and price point. The Genset consists of a spark ignited (SI) two cylinder vee style internal combustion engine (ICE) capable of running natural gas or propane fuel with a 8.5 kW generator connected directly to the engines crankshaft. This allows for electrical load to be applied to the …

    mtu Repository record for THE SETUP AND EXPERIMENTAL RESULTS OF DIRECT WATER INJECTION IN A SPARK IGNITED NATURAL GAS ENGINE AT VARYING COMPRESSION RATIOS (opens in a new tab)

  17. Chemical kinetics modelling of combustion processes in SI engines

    … challenge in combustion engine design. For spark ignition engines, these challenges have been targeted in the past decade or so, through ‘engine downsizing’ which refers to a reduction in engine displacement accompanied by turbocharging. Besides the benefits of this, it is expected to …

    whiterose Download PDF for Chemical kinetics modelling of combustion processes in SI engines (opens in a new tab)

  18. Control oriented engine modelling and engine multi-objective optimal feedback control

    … Charge Compression Ignition (HCCI) and Spark Ignition (SI) engine. The HCCI combustion model has been developed based on the Apparent Fuel Burning Rate formulations (AFBR) method. The model has been validated from 1500 rpm to 2250 rpm with different engine loads. For the experiments …

    birmingham Download PDF for Control oriented engine modelling and engine multi-objective optimal feedback control (opens in a new tab)

  19. Use of a thermodynamic cycle simulation to determine the difference between a propane-fuelled engine and an iso-octane-fuelled engine

    … cycle simulation of the four-stroke spark-ignition engine was used to determine the effects of variations in engine design and operating parameters on engine performance and emission characteristics. The overall objective was to use the engine cycle simulation to determine the …

    tamu Repository record for Use of a thermodynamic cycle simulation to determine the difference between a propane-fuelled engine and an iso-octane-fuelled engine (opens in a new tab)

  20. CFD modelling study of sprays and combustion of gasoline and DMF in direct injection gasoline engines

    … anti-knocking quality of DMF makes more advanced spark timing possible which brings about higher peak pressure and temperature and higher IMEP.

    birmingham Download PDF for CFD modelling study of sprays and combustion of gasoline and DMF in direct injection gasoline engines (opens in a new tab)

Page 1 of 3