Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 864 for “"specific surface area"”.

  1. Determination of an Appropriate Geometrical Model for Soil Aggregates Based Upon Specific Surface Area Scaling

    … properties. To investigate this topic, specific surface are (SSA) measurements were conducted on soul aggregates obtained from two sites. Differing long-term agricultural practices at the two sites resulted in nine distinct soil treatments. Each of the soil treatments was fractionated …

    ut-knoxville Repository record for Determination of an Appropriate Geometrical Model for Soil Aggregates Based Upon Specific Surface Area Scaling (opens in a new tab)

  2. Application of air flow measurements to the determination of cotton fiber specific surface area and maturity

    … developed to determine if the relationships for specific surface area and maturity used with the Arealometer were applicable to a system using a larger specimen size and random fiber orientation. Air flow resistance was determined for various varieties with a wide range of specific surface area …

    ut-knoxville Repository record for Application of air flow measurements to the determination of cotton fiber specific surface area and maturity (opens in a new tab)

  3. Important mineralogical factors for fluid saturation, specific surface area and pore size distributions based on gas adsorption, cation exchange capacity and 2D dielectric microscopy: a case study of quartz phase porcelanites in the Miocene Monterey Formation

    … layers imbibed more mineral oil than quartz rich areas. Quartz rich areas required higher porosity and/or microfractures to imbibe any mineral oil at all. It is conceivable that in the absence of connected fractures, dolomitic facies in the Monterey could have higher oil saturations than …

    colo-mines Repository record for Important mineralogical factors for fluid saturation, specific surface area and pore size distributions based on gas adsorption, cation exchange capacity and 2D dielectric microscopy: a case study of quartz phase porcelanites in the Miocene Monterey Formation (opens in a new tab)

  4. Salt and surfactant induced changes in physicochemical properties of cellulose aerogels

    … such as high porosity, lightweight, and high specific surface area. However, application in each field is guided by specific requirements. Specifically, porosity and specific surface area are the most meaningful characteristics in such applications. While porosity is very important for …

    ttu Repository record for Salt and surfactant induced changes in physicochemical properties of cellulose aerogels (opens in a new tab)

  5. Effective Surface Areas and Adsorption Capacity of Graphene with Vacancies

    … metrics. One such metric is the incredibly high specific surface area of 2360𝑚²𝑔⁻¹. Literature has advised the employment of graphene with vacancy defects for applications such as sensors, separation, supercapacitors, and batteries. Pores have been put into devices for these applications, yet the …

    umkc Repository record for Effective Surface Areas and Adsorption Capacity of Graphene with Vacancies (opens in a new tab)

  6. Evaluation of the effect of fines on asphalt concrete

    … This research consists of the evaluation of the surface area of different aggregates used in the state of West Virginia. This factor is important because the amount of asphalt needed to coat the aggregate depends on the specific surface area of the aggregate blend. The specific surface area of …

    wvu Repository record for Evaluation of the effect of fines on asphalt concrete (opens in a new tab)

  7. Modification of cerium oxide with different dopants and synthesis methods

    … ceria to obtain metal-doped ceria with high specific surface area and high homogeneity. For different synthesis methods, different parameters that may have affect on the specific surface area were also investigated. The synthesized oxides were characterized employing N2-physisorption, XRD, …

    chalmers Repository record for Modification of cerium oxide with different dopants and synthesis methods (opens in a new tab)

  8. Synthesis and characterization of nickel hydroxide powders for battery application

    … the characterization put on the morphology and specific surface area of the precipitate. The composition of the precursors as synthesized was a mixture of nickel hydroxide and nickel bicarbonate, 2(Ni(OH)₂, Ni(HCO₃)₁.₈₅(NO₃)₀.₁₅, as inferred from the chemical analysis and the TGA data. The XRD …

    iastate Repository record for Synthesis and characterization of nickel hydroxide powders for battery application (opens in a new tab)

  9. HIERARCHICALLY POROUS TiO2-BASED METAL OXIDES AND ITS APPLICATION IN PHOTOCATALYTIC DEGRADATION OF RHODAMINE B

    … the degradation of rhodamine B was studied. The specific surface area and porosity were found to be important for photocatalytic performance. Commercial TiO2 with the highest specific surface area and porosity showed better performance. In the second chapter, novel visible light responsive …

    cornell Repository record for HIERARCHICALLY POROUS TiO2-BASED METAL OXIDES AND ITS APPLICATION IN PHOTOCATALYTIC DEGRADATION OF RHODAMINE B (opens in a new tab)

  10. Microwave-assisted catalytic pyrolysis of refuse-derived fuel to improve pyrolysis performance and biochar properties

    … The produced biochar was mainly characterized by specific surface area and pore size distribution based on N₂ adsorption/desorption isotherm. K₂CO₃ showed higher heating rate and larger specific surface area of biochar than that of K₃PO₄ due to its prominent activation effect. Synergistic effect …

    ubc Repository record for Microwave-assisted catalytic pyrolysis of refuse-derived fuel to improve pyrolysis performance and biochar properties (opens in a new tab) Download PDF for Microwave-assisted catalytic pyrolysis of refuse-derived fuel to improve pyrolysis performance and biochar properties (opens in a new tab)

  11. Air Stripping of Volatile Organic Compounds from Groundwater: An Evaluation of a Centrifugal Vapor-Liquid Contactor

    … vapor-liquid contactor equipped with high specific surface area packing (>2000 m<sup>2</sup>/m<sup>3</sup>) was evaluated for air stripping of jet fuel components from groundwater. Hydraulic test data indicated that the Sherwood flooding correlation which has been proposed for use in …

    utk-theses Repository record for Air Stripping of Volatile Organic Compounds from Groundwater: An Evaluation of a Centrifugal Vapor-Liquid Contactor (opens in a new tab)

  12. The role of micropore size and chemical nature of the pore surface on the adsorption properties of activated carbon fibers

    … activated carbon fibers (ACF) with a range of surface areas from 760 $\rm m\sp2/g$ to 2420 $\rm m\sp2/g,$ prepared from phenolic precursors were examined with acetone, n-butane, benzene and nitrogen. The experimental results revealed a counter-intuitive relationship demonstrating that lower …

    uiuc Repository record for The role of micropore size and chemical nature of the pore surface on the adsorption properties of activated carbon fibers (opens in a new tab)

  13. Karbonatinio hidroksiapatito miltelių sintezė, apibūdinimas ir pritaikymas /

    … and fractures. Due to its high porosity and specific surface area CHA could also be utilised for heavy metal adsorbtion. This bachelor thesis focuses on synthesising CHA powder via dissolution-precipitation method in different synthesis conditions: 48 h at 80 °C and 72 h at 60 °C. XRD and …

    vilnius Repository record for Karbonatinio hidroksiapatito miltelių sintezė, apibūdinimas ir pritaikymas / (opens in a new tab)

  14. Highly porous platinum electrodes for the use in potentially implantable glucose fuel cells

    … platinum electrodes is adapted according to the specific requirements of such fuel cells. For this purpose a new electrodeposition process – cyclic electrodeposition of PtCu alloy - was developed enabling the fabrication of platinum electrodes with controllable specific surface area of up to …

    freiburg-diss Repository record for Highly porous platinum electrodes for the use in potentially implantable glucose fuel cells (opens in a new tab)

  15. Biomass-Derived Activated Carbon Through Self-Activation Process

    … model was developed to describe the changes of specific surface area and pore volume during the activation. The relationships between the activating temperature, dwelling time, yield, specific surface area, and specific pore volume were detailed investigated. The highest specific surface area …

    unt Repository record for Biomass-Derived Activated Carbon Through Self-Activation Process (opens in a new tab)

  16. Effect of the Composition, Nickel Sulfate Addition, and Reduction Temperature on the Morphology of Nickel Oxide through Reduction

    … The reduction process increased the specific surface area of samples from 0.03 to >2 m2/g linearly until ~80 % completion, when it plateaued. Nickel oxide samples with varying concentrations and types of impurities, most notably copper (0.13-5.18 %) and sulfur (0.005-0.36 %) were …

    guelph Repository record for Effect of the Composition, Nickel Sulfate Addition, and Reduction Temperature on the Morphology of Nickel Oxide through Reduction (opens in a new tab)

  17. Growth Mechanisms for Codoped Nanoceria

    Oxygen vacancy and surface area of the ceria nanoparticles are two major factors that contribute on the catalytic performance. Doping is one of the most commonly applied and also one of the most effective way to improve the performance of nanoceria. Different types of dopants can effectively change …

    unsw Repository record for Growth Mechanisms for Codoped Nanoceria (opens in a new tab)

  18. Evaluation of the field application of the Air Void Analyzer in quality control.

    … The air volume, the spacing factor, and the specific surface area that were obtained from the Air Void Analyzer tests were correlated to the durability index and total air volume that were measured with traditional methods. The research shows that the durability of concrete is governed by the …

    louisville Repository record for Evaluation of the field application of the Air Void Analyzer in quality control. (opens in a new tab)

  19. ΜΕΛΕΤΗ ΕΠΙΦΑΝΕΙΑΚΩΝ ΙΔΙΟΤΗΤΩΝ ΚΑΙ ΚΑΤΑΛΥΤΙΚΗΣ ΔΡΑΣΤΙΚΟΤΗΤΑΣ ΠΑΡΑΣΚΕΥΑΣΜΑΤΩΝ ΥΔΡΟΞΕΙΔΙΩΝ ΤΟΥ ΑΡΓΙΛΙΟΥ

    … WAS THE PREPARATION OF ALUMINUM HYDROXIDES WITH SPECIFIC SURFACE PROPERTIES AND CATALYTIC. THESE MATERIALS WERE PREPARED BY THE HYDROLYSIS OF ALCL3.6H2O IN AQUEOUS OR ALCOHOLIC SOLUTIONS AS WELL AS IN MIXED WITH ETHANOL AND ACETON AQUEOUS SOLUTIONS. AS PRECIPITATION AGENTS WERE USED THREE PRIMARY …

    greece Repository record for ΜΕΛΕΤΗ ΕΠΙΦΑΝΕΙΑΚΩΝ ΙΔΙΟΤΗΤΩΝ ΚΑΙ ΚΑΤΑΛΥΤΙΚΗΣ ΔΡΑΣΤΙΚΟΤΗΤΑΣ ΠΑΡΑΣΚΕΥΑΣΜΑΤΩΝ ΥΔΡΟΞΕΙΔΙΩΝ ΤΟΥ ΑΡΓΙΛΙΟΥ (opens in a new tab)

Page 1 of 44