Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"spin coating speed"”.
-
A Kinetic Monte Carlo Study of Morphology Dependence of Bulk Heterojunction Solar Cells on JV Behavior
… temperature, donor/acceptor weight ratio and spin coating speed are varied to observe the variation of performance of real fabricated cells. The xvi optimized parameters of simulation and fabrication are correlated and the simulation results are in agreement with the experimental results.
-
Comparison of the effect of experimental parameters on the properties of spin-coated and inkjet-printed indium tin oxide films
… a sol-gel ITO ink. Two deposition techniques, spin coating and inkjet printing were used to deposit single and multilayer ITO films. The processing parameters evaluated include the spin coating speed, inkjet printing drop spacing, ink concentration, temperature, and humidity of the ambient. The …
-
Solution-based Processing for Cu₂ZuSnS₄ (CZTS) Solar Cells
… effects of CZTS sol-gel precursor concentration, spin-coating speed, and annealing procedures were studied. UV-visible spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX or EDS), X-ray diffraction (XRD), Raman spectroscopy, and current-voltage …
-
Fabrication, Characterization and Modelling of Piezoelectric PVDF-TrFE polymer as a Force Sensor Using Spin Coating Method
… PVDF film directly on a potential device using a spin coating approach and fabricate it from scratch. However, it has its own challenges. In this research, PVDF-TrFE polymer is deposited via spin coating method and treated with various post-deposition processes to investigate its piezoelectricity …
-
Synthesis of KBNNO thin film by sol-gel method and its modification
… and the KBNNO thin film was deposited by spin coating. Several routes were used for precursor optimisation. After deposition, organic pyrolysis and metal oxide crystallisation were accomplished through heat treatment. All samples were deposited on Pt/SiO2/Si, while Pt was used as the …
-
Patterning Organic Electronics Based on Nanoimprint Lithography
… (P3HT), a organic semiconductor, was then spin-coated on the Teflon-AF template. Removing the sacrificial template by a fluorinated solvent achieved high-resolution P3HT patterns. P3HT lines and squares of various sizes (0.35 micron to tens of microns) were obtained by this method. This …
-
FABRICATION AND CHARACTERIZATION OF ORGANIC-INORGANIC HYBRID PEROVSKITE SOLAR CELLS
… Many solution-process parameters such as the spin-coating speed for deposition of the hole transporting layer (HTL), preparation of the HTL solution, impact of air and light on the HTL conductivity, and the effect of repetitive measurement of PSCs are investigated. The results show that the …