Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"split hopkinson bar"”.
-
Advancements in the Split Hopkinson Bar Test
The split Hopkinson bar test is the most commonly used method for determining material properties at high rates of strain. The theory governing the specifics of Hopkinson bar testing has been around for decades. It has only been the last decade or so, however, that significant data processing …
-
Split Hopkinson bar method of rock testing, The
Includes bibliographical references.
-
Design of a Split Hopkinson Bar Apparatus for use with Fiber Reinforced Composite Materials
… the dynamic response of materials is the Split Hopkinson bar. The main focus of this work was to design a Split Hopkinson Bar apparatus to determine the dynamic compressive behavior of fiber reinforced composite materials. Graphite epoxy laminated composites have compressive failure …
-
Experimental determination of material properties for materials subjected to high compressive strain rates
The design, fabrication and operation of a split Hopkinson bar apparatus is described. The theoretical basis for the experimental determination of material properties for materials subjected to high compressive strain rates using the split Hopkinson bar is discussed along with the assumptions made …
-
Numerical Simulation of a High Strain Rate Biaxial Compression Apparatus
… (105 s-1). Those that are capable, such as the Split Hopkinson Bar, Taylor Anvil and Plate Impact suffer from instability and are generally limited to one dimensional wave propagation. Of particular interest is material response under biaxial compression, similar to that seen in inertial …
-
Describing Large Deformation of Polymers at Quasi-static and High Strain Rates
… rate compressive and tensile loading using Split Hopkinson Bar devices, and they exhibit a temperature increase, which induces phase transition at the glass transition temperature.
-
Response of yarn systems to impact loading
… polymeric fibres based on the tensile split Hopkinson bar method and the transverse impact method, to obtain the dynamic mechanical response of Spectra 900 yarn and Spectra Shield flexible laminated composite. The responses obtained enable the establishment of accurate rate-dependent, …
-
Constitutive Behavior of Aluminum Alloy Sheet At High Strain Rates
… between ambient and 300°C, using a tensile split Hopkinson bar (TSHB) apparatus. As part of this research, the apparatus was modified in order to provide an improved means of gripping the sheet specimens. Quasi-static experiments also were conducted using an Instron machine. <br /><br /> The …
-
High strain rate-induced failure in steels at high shear strains
… AISI 4140 steel was tested using a torsional split Hopkinson bar at three different strain rates and the impact of strain rate on the material behaviour was examined. The influence of material hardness on failure mechanisms was also investigated by producing different tempers of 4140 steel …
-
Deformation and fracture of concrete under uniaxial impact loading
… with a computer numerical analysis of the bar-geometry axial-impact loading. The critical normal fracture strain energy U and mechanical energy W criteria are proposed for the spatial and time dependence explanation of spallation in concrete. The energy criteria are special cases of a more …
-
Dynamic strength and fragmentation of silicon carbide
… and dynamic rates of 102 s-1, using a Kolsky (split-Hopkinson) bar. The loading and failure have been investigated using high-speed imaging and Digital Image Correlation (DIC). Fragmentation has been shown to be an important factor in understanding the performance of advanced ceramics. …
-
A fully coupled dynamic framework for two-scale simulations of SHCC
… untersucht. Schließlich wird ein Split-Hopkinson-Bar Zugversuch numerisch repliziert. Dieser wird verwendet um die Funktionaltät der Methode aufzuzeigen, wie dynamische Effekte des Materials und der Struktur untersucht werden können.
-
Betondruckfestigkeit unter zweiaxialer dynamischer Belastung
… wurde ein weltweit einzigartiger zweiaxialer Split-Hopkinson-Bar entwickelt. Es wurden umfangreiche Versuchsserien mit insgesamt mehr als 2500 Einzelversuchen durchgeführt. Ermittelt wurden dabei die ein- und zweiaxialen statischen und dynamischen Betondruckfestigkeiten zweier Betone der …
-
A New Method of Measuring Flow Stress for Improved Modeling of Friction Stir Welding
… derived from hot compression, hot torsion, and split Hopkinson bar testing methods is assessed. A new method of measuring flow stresses in the stir zone of a friction stir welding tool is developed. This test utilizes a non-consumable flat-faced cylindrical tool of different geometries that …
-
Einfluss von Poren und Porenwasser auf die Festigkeitssteigerung von Beton unter hohen Belastungsgeschwindigkeiten
… Auf Basis von experimentellen Ver-suchen im Split-HOPKINSON-Bar an verschiedenen Normalbetonen konnte gezeigt werden, dass vorhandenes Porenwasser die statische und dynamische Betondruckfestigkeit in gleicher Weise signifikant reduziert. Diese Abnahme der Betondruckfestigkeit kann als …
-
Particle Friction, Breakage, and Damage: Deformation Mechanisms of Brittle Granular Materials
… performed in an oedometer, a drop tower, and a split-Hopkinson bar. These experiments provided some of the first data quantifying particle breakage at stresses up to several gigapascals. This study also used in-situ acoustic emissions measurements to study deformation mechanisms active …
-
Microstructure and texture controlled mechanical behaviour of aluminium processed by static and dynamic severe plastic deformation
… on the other hand, is based on the principles of split Hopkinson bar torsion testing. The refining efficiency of the dynamic and conventional high pressure torsion methods was compared in this investigation and is one of the important goals. To this end, the microstructural evolution in the …
-
Applications of the virtual fields method to the mechanical behaviour of rubbers under dynamic loading
… using traditional dynamic techniques such as the split Hopkinson bar: the low sound speed makes it difficult to achieve static equilibrium and the small supported forces give low signal-to-noise ratios in the experimental data. In this research, the dynamic VFM with the aid of high-speed imaging …
-
An investigation of Von Mises flow criterion at high rates of strain
… compression at a strain rate of 1000 s−1 using a Split Hopkinson Bar and at quasi-static strain rate using an Instron machine. Shear data was collected at a shear strain rate of 1750 s−1 using a Torsional Hopkinson Bar. The Mechanical Threshold Stress constitutive equations determined from the Von …
Page 1 of 3