Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 4737 for “"spray"”.
-
Coanda-Assisted Spray Manipulation Implementation to Plasma Spray
Co and a-assisted Spray Manipulation (CSM) is a means of modifying the direction of a jet. Previous isothermal static vectoring research is expanded to plasma spray. Two- dimensional Particle Image Velocimetry (PIV) was used to determine the vectoring results for small angles between 5-10°. …
-
Spray generation
This is an experimental investigation of the ligaments and drops generated at the free surface of liquid wall jets and liquid axisymmetric jets flowing over sand and polystyrene (beads) roughed surfaces. Experiments were conducted with freshwater and Eulerian and Lagrangian methods of description …
-
Nozzle spray quality and spray deposition in agricultural treatments
… mixture. Among these, the assessment of nozzle spray quality, evaluated in terms of droplet size spectrum, holds a significant role, as it has influence on the movement of the required dose to the target, on the unwanted off-target losses, as well as on the operator safety. In this context, the …
-
Parametric effects of spray characteristics on spray cooling heat transfer
Doctor of Philosophy (Ph.D.)
-
Investigation into continuous spray and metered spray using compressed gas propellant
… aerosol products are generally based on either spraying continuously (i.e. airfreshners, body spray, hairspray, insecticide, polish and disinfectant) or on spraying on metered liquid dosage. This investigation has focused on two different aerosol products: (i) Continuous spraying aerosol with …
-
Particle velocities and deposition for micro-cold spray and cold spray processes
Spray deposited ceramic, metal, and composite coatings are widely used for protective coatings as well as for functional applications such as sensors, battery cathodes, and perovskite solar cells. Micro-cold spray (MCS), also referred to as the aerosol deposition method or vacuum kinetic spraying, …
-
Engine spray combustion modeling using unified spray model with dynamic mesh refinement
… objective of this study is to improve the spray and combustion modeling of internal combustion engines using dynamic mesh refinement. The first part of the study used advanced spray models with a dynamic mesh refinement scheme to simulate atomization of gasoline and diesel sprays. …
-
Atomized dielectric spray-based electric discharge machining (spray-EDM) for sustainable manufacturing
… gap. A novel method of using atomized dielectric spray in EDM (Spray-EDM) to reduce the consumption of dielectric is developed in this study. The atomized dielectric droplets form a moving dielectric film up on impinging the work surface that penetrates the inter-electrode gap and acts as a …
-
A tentative double-spray model featuring spray vaporization and counterflow diffusion flames
Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 1997
-
Spray cooling with R134a
Spray cooling is a high heat flux cooling technique, which can be used to cool solid state laser diodes and other high heat flux electronic devices. This study will investigate the beat transfer coefficients obtained when spray cooling with Rl34a. The experiment will u e a single nozzle and a 1 cm2 …
-
Optical fuel spray measurements
Julkaistu vain painettuna, saatavuus katso Bibid. Published only in printed form, availability see Bibid
-
Spray Drying of Soymilk
… standards. In the development of a process for spray dried soymilk, the Food Science/INTSOY soymilk method was selected as the basic liquid soymilk preparation technique because this method resulted in a product with good acceptability. Since this method was intended to produce pasteurized …
-
Experiments in spray hydraulics
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1930
-
Droplet Impact Sub-cavity Histories and PDPA Spray Experiments for Spray Cooling Modeling
Spray cooling is a topic of current interest for its ability to uniformly remove high levels of waste heat from densely packed microelectronics. It has demonstrated the ability to achieve very high heat fluxes, up to 500 W/cm2 with water as the coolant, making it an attractive active thermal …
-
COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF SPATIALLY-RESOLVED SPRAY SCANNING SYSTEM (4S) SPRAY PATTERNS
… fluid dynamics (CFD) fire models, sprinkler sprays are represented in complex numerical simulations using Lagrangian particles. These CFD sprays are typically characterized using a combination of experimental data, literature correlations, and estimation. The Spatially-Resolved Spray Scanning …
-
Nozzle spray quality and spray deposition in agricultural treatments [Analisi degli spray e del deposito prodotti da ugelli per i trattamenti in agricoltura]
… diversi aspetti, lo studio della qualità dello spray prodotto dai comuni ugelli presenti nelle irroratrici, valutata in termini di spettro dimensionale delle gocce, svolge un ruolo significativo, poiché avrà effetto sul movimento della dose richiesta verso il bersaglio, sulle perdite fuori …
-
A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications
This work examines the investigation of the spray drying process of Hydroxyapatite powder (HA) used as a thermal spray deposit in the application of orthopaedic femoral implants. In this research, the Niro- Minor™ mixed spray dryer was used for both modelling and experimental studies. The process …
-
Spray characterization of water truck nozzles and proposed nozzle modifications to improve spray uniformity
… from water trucks by characterizing their water spray patterns. Two field methods were developed to evaluate water application, the 'moving truck method or trench method' and the 'stationary truck method or gutter method'. The moving truck method adequately simulated a construction site but was …
Page 1 of 237