Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 82 for “"stacking fault energy"”.
-
Hydrogen Effects on Crystal Dislocations and Stacking-Fault Energy
… Finally, the effect of hydrogen on the stacking-fault energy of an austenitic stainless steel is presented. Measurements done on dislocation nodes reveal a reduction of approximately 19% when comparing the stacking fault energies in vacuum and 40 torr of hydrogen.
-
Mechanical Behavior and Irradiation Response in Nanostructured Metals with Low Stacking Fault Energy
High-energy particles introduce significant damage to nuclear structural materials and eventually lead to the failure of the materials. Austenitic stainless steels, as a widely used structural material in current nuclear reactors, are face-centered cubic (FCC) metals with very low stacking fault …
-
A Data Driven Machine Learning Approach to Prediction of Stacking Fault Energy in Austenitic Steels
… alloy design problem there was a need to predict Stacking Fault Energy (SFE) for any untested alloy composition. SFE is a crucial parameter in determining different deformation regimes in austenitic steels. The SFE itself is dependent on the chemical composition and temperature in steels. There …
-
The Effect of Local Conditions on Deformation Processes in Low Stacking -Fault Energy FCC Alloys
The nucleation and propagation of deformation twins has been examined in samples of a nitrogen-strengthened austenitic steel alloy deformed at room temperature under quasi-static and high strain rate compression. Post-mortem analysis of the deformed microstructures at different levels of applied …
-
Dislocation Slip and Deformation Twinning in Face Centered Cubic Low Stacking Fault Energy High Entropy Alloys
… as in aerospace, automotive, transportation, and energy industries, among others. Mechanical behavior and the underlying plastic deformation mechanisms and the factors affecting HEAs need to be fully understood to be able to use these alloys for the mentioned applications and to design and develop …
-
Influence of multi-stage deformation processing and stacking fault energy on near-surface slip and martensite formation in austenitic stainless steels
… and 305, having either slightly lower or higher stacking fault energy ( 10 mJ/m2), were subject to the same cold rolling and characterized to document how variation in stacking fault energy influences microstructure evolution. The combined results from rolling 301, 304, and 305 stainless steels …
-
New Zirconium Hydrogen Second Nearest Neighbor Modified Embedded Atom Method (MEAM) Potential For Simulation of Stacking Fault Energy Along the <0110> Path Of The Hexagonal Closely Packed Lattice Basal Plane
… was created to more effectively simulate the stacking fault energy of different zirconium hydrogen solid solutions along the < 01 10 > path of the hexagonal closely packed (hcp) lattice basal plane. The 2nnMEAM is a binary alloy MEAM with a less severe screening function that enables the …
-
A study of the cold worked state and annealing behavior of the austenitic stainless steels
… profile analysis has been used to measure the stacking fault energies of the seven steels. Transmission electron microscopy combined with the x-ray line profile analysis was used to characterized the cold worked state of the steels. The recovery and recrystallization behavior of the steels were …
-
Direct Observation of Stacking Faults in Single Crystal T102 (Rutile) by Transmission Electron Microscopy
This study was undertaken to evaluate the stacking fault energy of single crystal rutile and to develop a model for the dislocation reaction.
-
Alloying-induced softening in metal nanowires studied by atomistic simulations
… been found: the alloying-induced reduction in stacking fault energy and the increase in atomic size misfit. The weight of two mechanisms on solid solution softening depends on the variation of stacking fault energy and atomic size misfit degree caused by changing the solute concentration, which …
-
Revealing deformation mechanisms of advanced face-centred cubic alloys at cryogenic environment via in situ neutron diffraction
… deformation mechanisms, chemical composition, stacking fault energy, and deformation temperature. This study shows a very promising way of achieving superior combinations of strengthening mechanisms by tailoring stacking fault energy, thus shedding a light on developing new alloys with lower …
-
The Validity of Using High Resolution Digital Image Correlation to Investigate the Influence of Stacking Fault Energies on Deformation Mechanics
… bulk strain measurement technique, the effect of stacking fault energy (SFE) on deformation mechanics was selected as a comparable phenomenon. The materials were selected to represent a range of stacking fault energy, stainless steel 316 (SS316), INVAR and pure nickel. The samples were prepared to …
-
Development of an integrated approach combining artificial neural network material based on modeling with finite element analysis of forming processes
… 6061 alumimum show the typical behavior of high stacking fault energy materials, where the controlling softening mechanism is dynamic recovery (early strain hardening followed by a smooth transition to a plateau of stress). In contrast, the flow stress behavior of nickel aluminide exhibits the …
-
Twinning dislocations in aluminum.
… with carefully monobromated radiation show that stacking faults are present in aluminum crystals grown by the strain anneal method. The evidence for the stacking faults are the streaks through some diffraction peaks, the variation in structure factors, Fhkl, as determined from the relative …
-
High-resolution electron microscopy of dislocation geometries
… that are found in dissociated dislocations or faulted dipoles in pure metals is very difficult, even with careful computed image matching techniques. The weak-beam technique of electron microscopy (Cockayne, Ray and Whelan 1969) overcomes this problem by tilting the specimen so that only the …
-
Atomistic Calculations Characterizing Thermodynamic and Mechanical Properties of High Entropy Alloys
… solution unit cells has a larger Gibb’s Free Energy. By using DFT and DFPT, a second phase in FeNiMoW, the $\mu$ phase Fe13Ni8Mo13W5, was also characterize. It is an A7B6 structure. It is a combination solid solution of Fe and Ni on the A sites and Mo and W on the B sites, with the …
-
Calorimetry of room temperature deformed copper
… in adiabatic surroundings and the differences in energy released between samples was obtained. The control circuits were automatic. Deformation was by elongation ranging from 12 to 40%, and the corresponding energy found was from 1.9 to 5.3 calories/gram-atom. No recovery energy was found. The …
-
Fatigue damage accumulation in nickel base superalloys.
… cells, normally associated with higher stacking fault energy materials. The number and width of persistent slip bands increased with the number of cycles, but varied both between grains and stress levels. It is proposed that initially looped precipitates were subsequently sheared. Crack …
-
Experimental Study of Grain Interactions on Rolling Texture Development in Face-Centered Cubic Metals
… distributions. For the case of a medium stacking fault energy metal like Cu, the texture and microstructure development depends wholly on the starting orientations. Microstructural instabilities in Cu are explained through a local slip clustering process, and the possible role of grain …
Page 1 of 5