Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 171 for “"stacking sequence"”.
-
Concurrent Topology and Stacking Sequence Optimization of Laminated Plates
… response is highly dependent on the laminate stacking sequence. Therefore, to take full advantage of the design freedom allowed by additive manufacturing new optimization solutions that can concurrently solve the shape and laminate orientation are essential for designing lightweight composite …
-
Optimal stacking sequence design of stiffened composite panels with cutouts
… and designer. First, the problem of laminate stacking sequence design is discrete in nature which complicates the solution process. Second, many local optima with comparable performance may be found. The present work addresses these challenges by investigating several techniques for designing …
-
Thickness And Stacking Sequence Determination Of 1T-Tantalum Disulfide Using Scanning Transmission Electron Microscopy
… to identify the dimension and atomic layer stacking of 1T-TaS2 samples with both accuracy and precision. In this work, our goal is to develop a reliable method to extract the thickness and stacking sequence of 1T-TaS2 directly from experimentally recorded images. High-angle annular dark …
-
Concurrent Optimization of Print Orientation, Stacking Sequence, and Topology for Fiber Reinforced Additively Manufactured Components
… concurrent print orientation optimization (POO), stacking sequence optimization (SSO), and topology optimization (TO). Print orientation (PO) design variables, , and stacking sequence (SS) design variables, , are used to establish a domain-level, 3D orientation of FRAM print-plane and …
-
Effect of Stacking Sequence and Fiber Orientation on the Stress-Strain Behavior of CFRP Confined Concrete Cylinders
… in the literature to examine the effect of stacking sequence and fiber orientation on the compressive behavior of fiber reinforced polymer (FRP) confined concrete. This thesis presents the results of an experimental investigation examining the effect of parameters such as fiber orientation, …
-
Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates
The effect of cooling rate and stacking sequence on fatigue behavior was analyzed for notched quasi-isotropic APC-2 laminates. The fatigue behavior of fast (475° F/min) and slow (1° F/min) cooled specimens of the following two layups was studied: Layup A of (-45/0/45/90), and Layup B of …
-
The Influence of Varying Fiber Stacking Sequence on the Tensile, Impact, and Water Absorption Properties of Unidirectional Flax/E-Glass Fiber Reinforced Epoxy Composite
… fiber hybrid composites, in which various stacking sequences of ax and glass fibers are used, are obtained using Charpy impact tests. Moisture absorption test was performed by immersing single fiber composites and various stacking sequences of hybrid composites in deionized water at room …
-
Effect of the Stacking Sequence and Number of Ply Orientation in a Quasi-Isotropic Laminated Plate on In-Plane Shear Modulus and Failure Modes
… failure mode and location, when designing a stacking sequence of quasi-isotropic carbon fiber laminated plates is essential to predict stability, resistance to deformation, and overall stiffness of the structure. This research investigates the effect of the stacking sequence of …
-
Flexible composite propeller design using constrained optimization techniques
… design objectives. Only symmetric ply stacking sequences were considered to eliminate the effect of centrifugal force on the propeller. Results show that the ply stacking sequence has an effect on the propeller characteristics of a conventional propeller. Proper stacking sequence of the …
-
Failure analysis of a quasi-isotropic laminated composite plate with a hole in compression
… made of laminates with various quasi-isotropic stacking sequences. Different stacking sequences are achieved by rotating a [±45/90/0]s stacking sequence laminate as a whole with respect to the loading axis of the specimens. Two- and three-dimensional finite element models, using commercial …
-
Fatigue response of notched graphite--epoxy laminates
… 0] s (type B) were considered and the effects of stacking sequence were compared. Nondestructive testing techniques such as X-radiography, moire technique, acoustic emission, deply technique, and stiffness change were performed to observe damage development. Static properties and damage initiation …
-
Minimum-weight design of compressively loaded stiffened panels for postbuckling response
… and modal interaction. The effect of laminate stacking sequence is also investigated. The current design procedure requires the stacking sequence to be prescribed, proving to be a limitation in the design procedure.
-
The synthesis and characterisation of some hexagonal perovskites
… are investigated as a function of the hexagonal stacking sequence and manganese oxidation state.</p> <p>The synthesis of the series of BaMnO<sub>3-x</sub> hexagonal perovskites is discussed. By varying both the partial pressure of oxygen and the firing temperature, stacking sequences with a range …
-
Prediction of In-Plane Stiffnesses and Thermomechanical Stresses in Cylindrical Composite Cross-Sections
… radius, the orientation of fibers, and the ply stacking sequence. The results are then validated using a FE model developed in ABAQUS using a simple quadrature S4R element type. Parametric case studies confirm the validity of the analytical model by accounting for different ply orientations, …
-
The Effect of the Fastener of Different Configuration Composite Panels on Failure Analysis
This study presents the effect of the stacking sequence and fiber orientation on a composite sandwich panel subjected to static in-plane bolt loading. Six plates were constructed with laminates of unidirectional carbon fiber and cross ply weaves of fiberglass. The orientations that were examined …
-
Hierarchical material models with microstructure for nonlinear analysis of progressive damage in laminated composite structures
… and a sublaminate model for a repeating ply stacking sequence. Newly developed orthotropic elastic-degrading (ED) material models are formulated in order to represent the nonlinear brittle behavior of the matrix constituent. As a result, progressive damage behavior of a lamina is effectively …
-
Interlaminar stresses in composite laminates: a perturbation analysis
… the sign of σ<sub>𝒛</sub> depends upon the stacking sequence, while for angle-ply laminates is σ<sub>𝒛</sub> independent of the stacking sequence and is always a finite maximum tensile value at the free edge. Moreover, the results for bidirectional laminates compare favorably with Pipes’ …
-
Stiffness and Strength Predictions of Discontinuous Fiber Composites
… A unique randomly-generated and non-symmetric stacking sequence is assigned to each RLVE. Experimentally-observed variations in the stiffness of a DFC part are then simulated by performing many FE analyses, where a new random stacking sequence is generated for each RLVE during each analysis. …
-
Considerations for the Design of a UD-NCF Composite Energy Absorbing Structure for Frontal and Oblique Crush Loading
… channel specimens with [0/±45/90]s and [±45/02]s stacking sequences under quasi-static oblique (i.e., 30-degree off-axis) loading were experimentally investigated to provide data for validation of an impact simulation model. For the single hat channel, specimens with a [0/±45/90]s layup achieved …
Page 1 of 9