Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"stall margin"”.

  1. Modification of axial-flow compressor stall margin by variation of stationary blade setting angles

    … of that engine. Generally, the compressor stalls or surges at low flow rates and chokes at high flow rates. Thus, any improvement in the range between these compressor aerodynamic limits is normally of benefit to the engine also. An idea for delaying the onset of rotating stall in a …

    iastate Repository record for Modification of axial-flow compressor stall margin by variation of stationary blade setting angles (opens in a new tab)

  2. DEVELOPMENT OF A BOUNDARY CONDITION DRIVEN MODEL FOR ANALYZING STALL MARGIN ENHANCEMENT THROUGH PASSIVE FLOW CONTROL IN TURBOMACHINERY

    … those in military aircraft, are vulnerable to stall, which can severely damage the engine and potentially lead to catastrophic failure. One method to mitigate stall and enhance engine performance is to extend the operational limits by employing a flow recirculation passage over the compressor …

    nps Repository record for DEVELOPMENT OF A BOUNDARY CONDITION DRIVEN MODEL FOR ANALYZING STALL MARGIN ENHANCEMENT THROUGH PASSIVE FLOW CONTROL IN TURBOMACHINERY (opens in a new tab)

  3. AN INVESTIGATION OF STALL CHARACTERISTICS AND STALL MARGIN IMPROVEMENT IN A TRANSONIC AXIAL COMPRESSOR USING SELF-RECIRCULATING FLOW CONTROL

    … aircraft can rapidly cause the compressor to stall, ultimately resulting in the potential loss of an aircraft or the lives of personnel. Although axial slot and circumferential groove casing treatments have been effective at increasing the margin to stall, they have traditionally been …

    nps Repository record for AN INVESTIGATION OF STALL CHARACTERISTICS AND STALL MARGIN IMPROVEMENT IN A TRANSONIC AXIAL COMPRESSOR USING SELF-RECIRCULATING FLOW CONTROL (opens in a new tab)

  4. EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF ADVANCED CASING TREATMENTS IN A TRANSONIC COMPRESSOR

    … operating limits, which can risk compressor stall. This study expands on previous work by combining experimental and computational methods to evaluate the effectiveness of advanced transonic compressor casing treatments at increasing stall margin while minimizing losses. The NPS …

    nps Repository record for EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF ADVANCED CASING TREATMENTS IN A TRANSONIC COMPRESSOR (opens in a new tab)

  5. FLOW CONTROL CHANNEL INSTRUMENTATION DESIGN AND MODELING

    Primary causes of compressor stalls in gas turbines are tip leakage, casing corner leakage, and boundary layer separation flow over the rotor blades. With the fluctuation of static pressure, a self-recirculating flow channel can help increase the stall margin while still maintaining efficiency. To …

    nps Repository record for FLOW CONTROL CHANNEL INSTRUMENTATION DESIGN AND MODELING (opens in a new tab)

  6. A Method to Control Turbofan Engine Starting by Varying Compressor Surge Valve Bleed

    … while maintaining an adequate compressor stall margin during engine start by varying the surge valve bleed. Varying the surge valve bleed was also shown to reduce compressor and fan required torque. A new method of turbofan engine component characteristic map extrapolation was developed. …

    vt Repository record for A Method to Control Turbofan Engine Starting by Varying Compressor Surge Valve Bleed (opens in a new tab)

  7. Experimental investigation of high-pressure steam-induced surge in a transonic compressor stage

    … carrier catapults has the potential to induce stall or surge in the compressors of jet aircraft during takeoff. As the carrier fleet ages and the Navy transitions to the single engine F-35C variant of the Joint Strike Fighter, further investigation of steaminduced surge phenomena is necessary …

    nps Repository record for Experimental investigation of high-pressure steam-induced surge in a transonic compressor stage (opens in a new tab)

  8. A Methodology for Sampling with a Pattern Classifier in Gas Turbine State Space to Create Transient Surrogate Models

    … Except for the low-pressure compressor's stall margin, the surrogate models matched or were more accurate than the PLMs, when predicting the performance metrics of interest, like net thrust, burner exit total temperature, and high-pressure compressor stall margin. Neither the PLMs nor the …

    gatech Repository record for A Methodology for Sampling with a Pattern Classifier in Gas Turbine State Space to Create Transient Surrogate Models (opens in a new tab)

  9. DUCTED FLOW CONTROL IN A TRANSONIC COMPRESSOR, METHODS AND ANALYSIS

    … whirl, and distortion can lead to compressor stall or surge, resulting in flow detachment within blade passages. This study aims to improve the stall margin in the NPS military fan (NPSMF) transonic compressor by incorporating passive flow control devices on the rotor blade tips, housed in …

    nps Repository record for DUCTED FLOW CONTROL IN A TRANSONIC COMPRESSOR, METHODS AND ANALYSIS (opens in a new tab)

  10. Analysis of Radial Inlet Distortion on Transonic Fan Performance

    … and compared for three operating points: near-stall, design, and choke. Hub radial inlet distortion magnitudes of 15% and 20%, and a tip radial distortion of 15% magnitude were investigated. Comparisons to clean inlet simulations are provided for additional insight. The 15% hub radial profile …

    byu Repository record for Analysis of Radial Inlet Distortion on Transonic Fan Performance (opens in a new tab) Download PDF for Analysis of Radial Inlet Distortion on Transonic Fan Performance (opens in a new tab)

  11. L1 Adaptive Control of Uncertain Nonlinear Systems with Dynamic Constraints: As Applied to Commercial Aircraft Engines

    … or even total engine failure. Additionally stall, also known as compressor surge, which occurs when the compressor is unable to work against incoming air resulting in flow reversal, must be avoided. To decrease the chances of entering into surge or stall, control systems are developed to …

    uconn-diss Repository record for L1 Adaptive Control of Uncertain Nonlinear Systems with Dynamic Constraints: As Applied to Commercial Aircraft Engines (opens in a new tab)

  12. Computational study of the effects of protruding studs casing treatment on the performance of an axial transonic turbofan

    … compressor stability and increase compressor stall margin, usually with some sacrifice of performance and efficiency. Active methods make use of external devices injecting and/or bleeding air from the compressor duct. Passive methods are primarily based on casing treatments, often involving …

    utc Repository record for Computational study of the effects of protruding studs casing treatment on the performance of an axial transonic turbofan (opens in a new tab)

  13. Computational investigation of the effects of casing treatments on the performance of a turbofan

    … of enhancing the performance and increasing the stall margin of a model turbofan stage in transonic operating conditions. The study is divided into three phases. During the first phase two types of casing treatments, inward protruding rings and circumferential grooves, were tested with relatively …

    utc Repository record for Computational investigation of the effects of casing treatments on the performance of a turbofan (opens in a new tab)

  14. Convection from manufactured ice roughness with varying flux boundary conditions.

    … decreases lift coefficients, and reduces stall margin, which can lead to aircraft accidents. To predict the shape of these ice accretions, codes, such as the NASA LEWICE code, have been created that step through time and solve an energy balance for an iced airfoil. A critical part of this …

    baylor Repository record for Convection from manufactured ice roughness with varying flux boundary conditions. (opens in a new tab)

  15. COMPUTATIONAL COMPRESSOR PERFORMANCE IMPROVEMENTS UTILIZING SELF-RECIRCULATION THROUGH INLET GUIDE VANES

    Compressor stall is a performance limit on aircraft engines. Increasing compressor stall range broadens the safe operating range of the aircraft. Research into compressor casing treatment designs is needed to accomplish an increase in compressor stability range, while not completely sacrificing …

    nps Repository record for COMPUTATIONAL COMPRESSOR PERFORMANCE IMPROVEMENTS UTILIZING SELF-RECIRCULATION THROUGH INLET GUIDE VANES (opens in a new tab)

  16. An Experimental Characterization of Tip Leakage Flows and Corresponding Effects on Multistage Compressor Performance

    … rise capability, isentropic efficiency, and stall margin. With modern engine designs trending toward decreased core sizes to increase propulsive efficiency (by increasing bypass ratio) or additional compression stages to increase thermal efficiency by increasing the overall pressure ratio, …

    purdue-thes Repository record for An Experimental Characterization of Tip Leakage Flows and Corresponding Effects on Multistage Compressor Performance (opens in a new tab)

  17. Convection from ice roughness surfaces using scaled Reynolds numbers for larger NACA 0012 airfoils.

    … weight and drag, while also decreasing lift and stall margin. Previous studies at Baylor University characterized the convective heat transfer for roughness surfaces exposed to accelerating flow similar to that experienced by a 21-in. NACA 0012 airfoil. The current study characterizes the …

    baylor Repository record for Convection from ice roughness surfaces using scaled Reynolds numbers for larger NACA 0012 airfoils. (opens in a new tab)

  18. Experimental investigation of high-pressure steam induced stall of a transonic rotor

    … system of U.S. Navy aircraft carriers can stall the compressors of modern jet aircraft if ingested during takeoff. This phenomenon, known as "pop stall", is of particular concern to the U.S. Navy as their current fleet of F404 engines age, the newer F414 engine comes online, and the F-35C …

    nps Repository record for Experimental investigation of high-pressure steam induced stall of a transonic rotor (opens in a new tab)

  19. STALL CHARACTERISTIC PREDICTION IN A SINGLE PASSAGE OF A TRANSONIC AXIAL COMPRESSOR ROTOR

    … performance and resolving flow features near stall. A previous CFD model of the NPSMF is examined through a mesh sensitivity study in order to better resolve flow through the device in the near-stall region. Additionally, the existing gas path geometry is reconstructed to provide a …

    nps Repository record for STALL CHARACTERISTIC PREDICTION IN A SINGLE PASSAGE OF A TRANSONIC AXIAL COMPRESSOR ROTOR (opens in a new tab)

  20. Measurements of Flow in Boundary Layer Ingesting Serpentine Inlets

    … by as much as 30%, implying improvements in stall margin and engine performance. Analysis of the wake shape entering the S-duct showed that the airframe and inlet duct are both important components of a wake-ingesting inlet/diffusion system. Shape effects and static pressure distributions …

    vt Repository record for Measurements of Flow in Boundary Layer Ingesting Serpentine Inlets (opens in a new tab)

Page 1 of 2