Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 352 for “"static load"”.

  1. Dynamic and static load balancing using PVM

    <p>This thesis presents both dynamic and static load balancing of processor work using the Parallel Virtual Machine (PVM) distributed computing environment. Im- plementations of load balancing for task queue management problems are evaluated in heterogeneous. multi-user computing environments. The …

    ut-knoxville Repository record for Dynamic and static load balancing using PVM (opens in a new tab)

  2. Static Load Bolted Joint Elastic Resilience Testing Methodology

    … how much the bolt and clamped part deform under load is critical when determining fasteners for a bolted joint. VDI 2230 is the internationally recognized bolt sizing standard and contains the equations used to determine each of the bolted joint component’s resilience as well as values for …

    sdstate Repository record for Static Load Bolted Joint Elastic Resilience Testing Methodology (opens in a new tab)

  3. Low Temperature Creep/Relaxation Behaviour of PM Steels under Static Load

    … dimensional stability in applications under high static loads over a sustained period of time at temperatures where creep normally doesn’t occur. In high performance applications, such a small dimensional instability could have an adverse effect on the overall performance of the system. …

    chalmers Repository record for Low Temperature Creep/Relaxation Behaviour of PM Steels under Static Load (opens in a new tab)

  4. Reinforced Concrete Beams Subjected to Repeated Drop Weight Impact and Static Load

    … concrete beams (RC-beams) subjected to impulse loading, a high energy absorption and large plastic deformation capacity is of interest and not necessarily the load capacity that is of interest like it is for statically loaded structures. The aim of this thesis is to deepen the knowledge of the …

    chalmers Repository record for Reinforced Concrete Beams Subjected to Repeated Drop Weight Impact and Static Load (opens in a new tab)

  5. A Test Rig to Measure the Static Load Performance of a Water Lubricated Thrust Bearing

    … the water pipeline system, developing a static load system, installing instrumentation, and developing means of data acquisition. Presently, the revamped system has rotated to a speed of 5 krpm. Measurements of the free-free mode natural frequencies and lateral mode shapes of the …

    tamu Repository record for A Test Rig to Measure the Static Load Performance of a Water Lubricated Thrust Bearing (opens in a new tab)

  6. Simulation and close-to-optimal algorithm for the static load balancing of a network of heterogeneous processors

    … linear programming-based algorithm for the static load balancing of a network of heterogeneous processors is described and implemented. Experimental results suggest that the amount of time required by the implementation of the algorithm to balance the loads of the servers as a function of …

    njit Repository record for Simulation and close-to-optimal algorithm for the static load balancing of a network of heterogeneous processors (opens in a new tab)

  7. FRP Strengthened RC Beams Subjected to Drop Weight Impact and Static Load - Experimental study for structural response

    … Concrete (RC) beams subjected to impact loading by studying the response of deformation capacity and the energy absorption under impact loading. The remaining residual capacity is also of interest in this study which is established by static loading of impacted beams until failure by …

    chalmers Repository record for FRP Strengthened RC Beams Subjected to Drop Weight Impact and Static Load - Experimental study for structural response (opens in a new tab)

  8. Static Load Balancing using Non-Uniform Mesh Partitioning based on Ray Density Prediction for the Parallel Wavefront Construction Method

    … exhibits inefficient performance owing to load imbalances between multiple processors.This paper applies a static load balancing approach based on a method for predicting future loads for a synthetic salt dome model, in order to improve the performance.The approach utilizes a preliminary …

    tamu Repository record for Static Load Balancing using Non-Uniform Mesh Partitioning based on Ray Density Prediction for the Parallel Wavefront Construction Method (opens in a new tab)

  9. A computational method for analysis of material properties of a non-pneumatic tire and their effects on static load deflection, vibration and energy loss from impact rolling over obstacles

    … (PU). Changes in material properties on static load-deflection curves and vibrations of spoke and ground force reaction during high-speed rolling are studied. In addition, energy loss upon impact with an obstacle is also studied. For static load deflection studies, a new analysis …

    clemson Repository record for A computational method for analysis of material properties of a non-pneumatic tire and their effects on static load deflection, vibration and energy loss from impact rolling over obstacles (opens in a new tab)

  10. Pile capacity estimation of existing deep foundations by CPT methods

    … place capacity is to perform a full-scale axial load test. This method is often impractical due to cost and the likelihood of destroying a needed foundation element in the process. An alternative method to estimate pile capacity is needed. Cone Penetration Test (CPT) methods can be used to …

    missouri Repository record for Pile capacity estimation of existing deep foundations by CPT methods (opens in a new tab)

  11. Measurements of the Static and Dynamic Load Performance of a Water Lubricated Hybrid Thrust Bearing

    After a successful static load testing campaign in 2015, the thrust bearing test rig has been reconfigured for dynamic load tests to determine force coefficients (stiffness, damping, and added mass). Continuous lubrication flow is supplied by a new, closed-loop water supply system capable of a wide …

    tamu Repository record for Measurements of the Static and Dynamic Load Performance of a Water Lubricated Hybrid Thrust Bearing (opens in a new tab)

  12. Modelling of pile load tests in weak rock

    … of this thesis was to investigate the loss of load capacity of relaxed pile groups driven into weak bedrock. This was accomplished in the laboratory using a dynamic driving apparatus equipped with a static load testing system. The static load testing system applied loads hydraulically, and the …

    njit Repository record for Modelling of pile load tests in weak rock (opens in a new tab)

  13. Axial load tests and analysis for open-ended steel tubular piles driven into weathered rock.

    … into weathered rock was investigated using static load tests, finite element analysis and dynamic load tests. Dynamic load tests were carried out by using the Case Method and the CAPWAP Method which were used to determine the bearing capacity of piles. The effects of final set, pile burial …

    ottawa-retro Repository record for Axial load tests and analysis for open-ended steel tubular piles driven into weathered rock. (opens in a new tab)

  14. The Impact of Large-scale Dynamic Load Modeling on the U.S. Eastern Interconnection

    … this thesis is to introduce widespread dynamic load models to the United States Eastern Interconnection 2030 power grid model to help improve its accuracy and capabilities. Currently, all loads in the system are represented by static load models that are unable to capture load phenomenon …

    ut-knoxville Repository record for The Impact of Large-scale Dynamic Load Modeling on the U.S. Eastern Interconnection (opens in a new tab)

  15. Effects of topical fluoride prophylactic agents on the mechanical properties of orthodontic nickel-titanium closed coil springs

    … orthodontic closed coil springs. Unloading force and rigidity were measured at 1, 4, 8, and 12 weeks, after springs were exposed to phosphate buffered saline (PBS), PBS combined with acidulated fluoride (PBS+APF) or sodium fluoride (PBS+NaF) with or without spring static loading. …

    umkc Repository record for Effects of topical fluoride prophylactic agents on the mechanical properties of orthodontic nickel-titanium closed coil springs (opens in a new tab)

  16. Feasibility of Pile Driving Analyzer for Pile On Rock

    … is to check whether piles can withstand design load. Two commonly used methods are high strain dynamic piles and static load testing. Static load testing is very time-consuming, requires heavy deadloads and much space, and doesn’t have stress monitoring advantages in piles. High strain dynamic …

    gsu Repository record for Feasibility of Pile Driving Analyzer for Pile On Rock (opens in a new tab)

  17. Statnamic Lateral Load Testing and Analysis of a Drilled Shaft in Liquefied Sand

    Three progressively larger statnamic lateral load tests were performed on a 2.59 m diameter drilled shaft foundation after the surrounding soil was liquefied using down-hole explosive charges. An attempt to develop p-y curves from strain data along the pile was made. Due to low quality and lack of …

    byu Repository record for Statnamic Lateral Load Testing and Analysis of a Drilled Shaft in Liquefied Sand (opens in a new tab) Download PDF for Statnamic Lateral Load Testing and Analysis of a Drilled Shaft in Liquefied Sand (opens in a new tab)

Page 1 of 18