Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"static loading test"”.

  1. Minimum steel requirements for masonry walls : out-of-plane forces

    … Full size non-loadbearing walls were tested under monotonic quasi-static loading. Test results showed that for typical 8 feet (2.44 m) storey height walls, the main steel may be spaced at more than 4 feet (1.22 m) and full primary bending moment may still be achieved. Joint …

    ubc Repository record for Minimum steel requirements for masonry walls : out-of-plane forces (opens in a new tab) Download PDF for Minimum steel requirements for masonry walls : out-of-plane forces (opens in a new tab)

  2. A Self-contained Wireless Structural Health Monitoring Tool

    … actively or passively using non-destructive testing (NDT) and non-destructive inspection (NDI) techniques. NDI crack detection and strain measurement systems are currently used in critical areas of structures, but are limited due to needing wires for communication and a power source. Although …

    south-carolina Repository record for A Self-contained Wireless Structural Health Monitoring Tool (opens in a new tab)

  3. Seismic retrofit of reinforced concrete beams, columns, and joints with thin steel sheets and steel plates

    … plates, to validate the retrofit technique with testing of two 4/5-scaled beam-column assemblage specimens, and to develop a strut-and-tie model to ascertain the force transfer mechanism of beam-column joints under seismic loads. Because of the introduction of thin steel sheets, weld joints that …

    must-thes Repository record for Seismic retrofit of reinforced concrete beams, columns, and joints with thin steel sheets and steel plates (opens in a new tab)

  4. Prediction of pile drivability from CPT and WEAP analysis

    … in all types of soils. The cone penetration test (C PT) is a useful tool for detailed profiling of soil conditions at a site and has been found by many researchers to provide a reliable estimate of long term pile capacity as determined from a static loading test. An attempt has been made in …

    ubc Repository record for Prediction of pile drivability from CPT and WEAP analysis (opens in a new tab) Download PDF for Prediction of pile drivability from CPT and WEAP analysis (opens in a new tab)

  5. A Study of the Correlation Between Static and Dynamic Modulus of Elasticity on Different Concrete Mixes

    … is to determine the relationship between the Static Modulus of Elasticity and the Dynamic Modulus of Elasticity in various concrete mixes. The Static Loading Test was used to measure the strains associated with applied stresses on cylindrical concrete specimens to determine the Static Modulus. …

    wvu Repository record for A Study of the Correlation Between Static and Dynamic Modulus of Elasticity on Different Concrete Mixes (opens in a new tab)

  6. Evaluating the Behavior of Laterally Loaded Piles under a Scoured Condition by Model Tests

    … their behavior under a scoured condition, model tests of laterally loaded piles were conducted in this study to investigate the effects of the scour depth, scour slope, and scour width under both static and repeated loading. Total of 41 tests were conducted in this study. For the static loading …

    ku Repository record for Evaluating the Behavior of Laterally Loaded Piles under a Scoured Condition by Model Tests (opens in a new tab)

  7. Oil Film Thickness Measurements in Journal Bearings under Normal, Severe & Dynamic Loading Conditions using Ultrasound

    … platforms have been designed. The first is a static loading test platform instrumented with ultrasonic transducers embedded within the shaft. Testing under normal operating conditions demonstrated that the combined application of multiple ultrasonic techniques enables accurate circumferential …

    whiterose Download PDF for Oil Film Thickness Measurements in Journal Bearings under Normal, Severe & Dynamic Loading Conditions using Ultrasound (opens in a new tab)

  8. VYUŽITÍ ELEKTRONICKÝCH MEŘÍCÍCH SYSTÉMŮ PŘI SLEDOVÁNÍ STAVEBNÍCH KONSRUKCÍ

    Tato práce se zabývá využitím elektronických měřících systému při sledování stavebních konstrukcí. První část práce byla zaměřena na zmapování dostupných měřících systémů pro sledování deformací a poměrných přetvoření, na jejich přesnost měření, výhody a nevýhody včetně příkladů monitoringu ze …

    brno-tech Repository record for VYUŽITÍ ELEKTRONICKÝCH MEŘÍCÍCH SYSTÉMŮ PŘI SLEDOVÁNÍ STAVEBNÍCH KONSRUKCÍ (opens in a new tab)