Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 75 for “"stator current"”.

  1. Quickest Fault Detection in Direct Drive Wind Turbine Using Stator Current

    … in direct-drive wind turbines (WT), based on stator current analysis and quick change point detection techniques, is proposed. Bearing faults are common problems for machinery, such as wind turbines. Online methods of fault detection give clear advantages by allowing the diagnosis of wind …

    arkansas Repository record for Quickest Fault Detection in Direct Drive Wind Turbine Using Stator Current (opens in a new tab)

  2. Detection of broken rotor bars in induction motors using stator current measurements

    This work proved the feasibility of an interferometric, high pressure sensor. A pressure measurement system based on a birefringent, compact, Fabry-Perot etalon was selected and designed. The temperature response of the reflectivity of the etalon was calibrated; a 1 C change in temperature was …

    nps Repository record for Detection of broken rotor bars in induction motors using stator current measurements (opens in a new tab)

  3. Incipient Bearing Fault Detection for Electric Machines Using Stator Current Noise Cancellation

    … fault detection scheme for electric machines via stator current. A new method, called the stator current noise cancellation method, is proposed to separate bearing fault-related components in the stator current. This method is based on the concept of viewing all bearing-unrelated components as …

    gatech Repository record for Incipient Bearing Fault Detection for Electric Machines Using Stator Current Noise Cancellation (opens in a new tab)

  4. Reducing stator current harmonics for a doubly-fed induction generator connected to a distorted grid

    … controllers to filter out the fifth and seventh stator current harmonics. Each PI controller operates in a reference frame that rotates in synchronicity with the harmonic that is being filtered. The second controller operates in the synchronous reference frame and simultaneously filters both the …

    nps Repository record for Reducing stator current harmonics for a doubly-fed induction generator connected to a distorted grid (opens in a new tab)

  5. Separating Load Torque Oscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring

    Stator current spectral analysis techniques are usually used to detect rotor faults in induction machines. Magnetic field anomalies in the airgap due to the rotor faults result in characteristic side-band harmonic components in the stator current spectrum, which can be measured as rotor fault …

    gatech Repository record for Separating Load Torque Oscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring (opens in a new tab)

  6. A microscopic investigation of force generation in a permanent magnetic synchronous machine

    … a relationship between the q- and d-axis stator current (or voltage) and the tangential component of electromagnetic force (torque), which is created to yield rotor rotation. Although useful, traditional analysis fails to consider the vector component-nature of force generation, i.e. that …

    must-thes Repository record for A microscopic investigation of force generation in a permanent magnetic synchronous machine (opens in a new tab)

  7. Nonintrusive Condition Monitoring and Fault Diagnosis for Wind Turbine Gearboxes Using Generator Current Signals

    … gearboxes. The proposed methods use only the current signals measured from the terminals or used in the control system of wind turbine generators. Current-based gearbox fault diagnosis has advantages over traditional vibration-based methods in terms of cost, hardware complexity, …

    nebraska Repository record for Nonintrusive Condition Monitoring and Fault Diagnosis for Wind Turbine Gearboxes Using Generator Current Signals (opens in a new tab)

  8. Detection of Rotor and Load Faults in BLDC Motors Operating Under Stationary and Non-Stationary Conditions

    Brushless Direct Current (BLDC) motors are one of the motor types rapidly gaining popularity. BLDC motors are being increasingly used in critical high performance industries such as appliances, automotive, aerospace, consumer, medical, industrial automation equipment and instrumentation. Fault …

    gatech Repository record for Detection of Rotor and Load Faults in BLDC Motors Operating Under Stationary and Non-Stationary Conditions (opens in a new tab)

  9. Diagnotics of Air Gap Eccentricity in Closed-Loop Drive-Connected Induction Motors

    … is based on monitoring fault harmonics in the stator current. This research analyzes the distribution of the eccentricity-related fault harmonics between the stator voltage and current, and points out that monitoring only the stator current is insufficient. When the motor is supplied by a …

    gatech Repository record for Diagnotics of Air Gap Eccentricity in Closed-Loop Drive-Connected Induction Motors (opens in a new tab)

  10. SUPPRESSION OF HARMONIC TORQUE AND HARMONIC CURRENT IN PERMANENT MAGNET SYNCHRONOUS MOTOR

    In this dissertation harmonic current, harmonic torque originated at the load and harmonic torque originated at the motor, where modeled and treated via closed loop control. The dissertation propose a remedy for cancelling harmonic current by placing the proposed adaptive feedforward controller …

    siu-theses Repository record for SUPPRESSION OF HARMONIC TORQUE AND HARMONIC CURRENT IN PERMANENT MAGNET SYNCHRONOUS MOTOR (opens in a new tab)

  11. Diagnostics of rotor and stator problems in industrial induction motors.

    … project, two kinds of induction motor faults, stator short circuit fault and broken rotor bar fault, are investigated by using motor current signature analysis (MCSA) and zero crossing time (ZCT) method. These methods are based on the detection of sidebands around the supply frequency in the …

    adelaide Repository record for Diagnostics of rotor and stator problems in industrial induction motors. (opens in a new tab)

  12. Direct Torque Control for Silicon Carbide Motor Drives

    … by DTC to reduce the torque ripples and decrease stator current total harmonic distortion (THD), which however can lower the drive efficiency. Through the use of the emerging silicon carbide (SiC) devices, which have lower switching losses compared to their silicon counterparts, it is feasible to …

    arkansas Repository record for Direct Torque Control for Silicon Carbide Motor Drives (opens in a new tab)

  13. Simulation and control of a stepping motor

    … input-outout measurements. The effects of eddy currents, saturation, hysteresis, drive circuit characteristics and non-linear torque displacement characteristics are considered and methods of determining transfer functions, which take account of these effects, are offered. The static torque …

    aston Download PDF for Simulation and control of a stepping motor (opens in a new tab)

  14. Induction machine broken rotor bar diagnostics using prony analysis.

    … sideband frequency components presenting in the stator current spectrum. Therefore, identification of these sideband frequencies can be used as a convenient and reliable approach to broken rotor bar fault diagnosis. Discrete Fourier Transform (DFT) is a conventional spectral analysis method used …

    adelaide Repository record for Induction machine broken rotor bar diagnostics using prony analysis. (opens in a new tab)

  15. On the different magneto-mechanical waves in faulty induction motors

    … of the saturation harmonics existing in the stator currents. Thirdly, I have been able to successfully model a motor suffering from eccentricity using Arbitrary Lagrangian Eulerian description of magnetic fields. This computational model, together with a permeance model, was able to justify …

    aalto Repository record for On the different magneto-mechanical waves in faulty induction motors (opens in a new tab)

  16. Detection of faults in a scaled down doubly-fed induction generator using advanced signal processing techniques.

    … customized to make provision for implementing stator inter-turn short-circuit faults (ITSCF), rotor ITSCF and static eccentricity (SE) faults in the laboratory environment. The micromachine has been assessed under the healthy and faulty states, both before and after incorporating a converter …

    cape-town Repository record for Detection of faults in a scaled down doubly-fed induction generator using advanced signal processing techniques. (opens in a new tab)

  17. Ανάπτυξη μεθόδων διάγνωσης σφαλμάτων σε ελεγχόμενο κινητήριο σύστημα αποτελούμενο από ηλεκτρονικούς μετατροπείς ισχύος και ασύγχρονη μηχανή

    … in the asynchronous machine by analyzing the currents of the inverter in steady state and transient operation. The Continuous Wavelet Transform (CWT) of motor stator current has been proposed for successful motor fault diagnosis during changing values of the mechanical load or the operating …

    greece Repository record for Ανάπτυξη μεθόδων διάγνωσης σφαλμάτων σε ελεγχόμενο κινητήριο σύστημα αποτελούμενο από ηλεκτρονικούς μετατροπείς ισχύος και ασύγχρονη μηχανή (opens in a new tab)

  18. Novel Control Strategies for High Speed Permanent Magnet Brushless Motor Drives

    … DC (BLDC) operation. In order to solve the current harmonic issues which are common to BLAC drives, the effect of inverter nonlinearity is firstly investigated. It is shown that the nonlinearity effect will generate the 6n±1th order phase current harmonics. Based on the analysis of current …

    whiterose Download PDF for Novel Control Strategies for High Speed Permanent Magnet Brushless Motor Drives (opens in a new tab)

  19. Instantaneous Electric Power as a Tool for Control of Induction Motors - A Pilot Study

    … magnetic flux can be controlled by adjusting the stator current by selecting a suitable voltage space vector at the beginning of each switching interval. We named that idea as Direct Power Control (DPC), it may facilitate development of novel control methods of induction motor in future studies.It …

    unr Repository record for Instantaneous Electric Power as a Tool for Control of Induction Motors - A Pilot Study (opens in a new tab)

  20. Técnicas optimizadas de análisis de señal en dominio tiempo-frecuencia para el diagnóstico de máquinas de inducción en régimen transitorio

    … window for time-frequency analysis of the stator current using said transformed, so it makes a proposal to reduce the computation time and memory capacity calculation of this analysis of this signal by moving the window in the domain frequency rather than the temporary. Thus it contributes …

    upv Repository record for Técnicas optimizadas de análisis de señal en dominio tiempo-frecuencia para el diagnóstico de máquinas de inducción en régimen transitorio (opens in a new tab)

Page 1 of 4