Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"stencil printing"”.
-
Validating the Operating Window Concept for Robustness on a Circuit Board Stencil Printing Process
… steps, applying it to a circuit board printing process. The results have shown that it is possible to have a relationship between the Operating Window range and the distribution variation from the system output.
-
Characterisation of lead-free solder pastes and their correlation with the stencil printing process performance
… between solder paste properties and their printing process performance. The recent EU directives on RoHS (Restriction of Hazardous Substances – enacted by UK regulations) and WEEE (Waste from Electrical and Electronic Equipment) has led to the use of lead-free soldering in the SMA (surface …
-
Modelling and computer simulation of the behaviour of solder paste in stencil printing for surface mount assembly
… manufacturing industry in solder pasteprinting for ultra-fine pitch surface mount and flip-chip assembly is the difficulty inachieving consistent paste deposit volumes from pad-to-pad. At the very small aperturegeometries required for ultra-fine pitch and flip chip assembly, flow …
-
Effects of Solder Paste Volume on PCBA Assembly Yield and Reliability
Solder paste printing is the most common method for attaching surface mount devices to printed circuit boards and it has been reported that a majority of all assembly defects occur during the stencil printing process. It is also recognized that the solder paste printing process is wholly …
-
Flexible electronics : materials and sensor fabrication
… thin films by using different printing techniques. These techniques could replace vacuum techniques for manufacturing piezoelectric/pyroelectric sensors. Ink-jet, screen and stencil printing techniques were developed to print these devices. This work outlines attempts to develop …
-
Ceramics
In the past the silkscreen stencil printing process was expensive and very complicated. Only industry could do it with any success. However, for precise work even industry would use decals because of fine details, simplicity and installation and economy. Recently, however, the situation has changed …
-
Breathing monitoring with RFID sensing: Tag Antenna Design and Signal Processing
… on the human body. Two different methods, stencil printing and copper tape engraving, were used for tag antenna fabrication, with advantages and challenges analyzed. Overall, our study suggests that RFID technology holds a big potential for non-invasive and localized respiratory monitoring.
-
High efficiency metal stencil printed silicon solar cells
… crystalline silicon solar cells by using metal stencil printing technique to replace screen printing or electroless plating techniques for implementing crystalline silicon solar cell front metallization. The developed laser-cut stainless steel stencils successfully challenge two of the cell …
-
PRINTED METALLISATION OF PHOSPHORUS DOPED SILICON SURFACES FOR SOLAR CELL APPLICATIONS
… losses. This work compares two high-throughput printing technologies, namely printing by screens versus stencils. Uniform print line definition and optimised Ag paste utilisation makes stencil printing the preferred choice for fine-line metallisation. Furthermore, the metal-silicon interface in …
-
Screen printed textile based wearable biopotential monitoring
… electrode networks on textile and screen printing is selected for this work. Several conductive and insulating screen printable pastes were then evaluated for this application and suitable pastes were selected. Screen printing was used to create networks of conductive tracks on the surface …
-
Process Development And Characterization Of Piezoelectric Transducers On Flexible Substrates For High Frequency Ultrasound Applications
… Several fabrication methods including screen printing, stencil printing are developed to form transducers on flexible substrates like polyimide with thickness and lateral dimensions in the 15-200µm range. These devices are formed at low temperatures (<140°C) and poling process conditions were …
-
Development of a Novel, Manufacturing Method of Producing Cost-Effective Thin-Film Heat Flux Sensors
… using a combination of copper etching and stencil printing nickel/silver conductive ink thermocouple materials onto a thin-film polyimide Kapton® substrate. The semi-automated production capabilities of this manufacturing process significantly decrease the cost of producing thin-film heat …
-
Process Control in High-Noise Environments Using A Limited Number Of Measurements
… over the solder-paste volume deposition in the Stencil Printing Process (SPP). Results show that it is possible to change the operating point of the process by modifying certain machine parameters and even compensate for the difference in height due to change in print direction.
-
Towards Completely Printed High-Capacity Flexible Zinc-Air Batteries
… battery electrolyte biodegradable. The screen printing and stencil printing tools employed for open-air processing in this study are widely available and scalable to high production throughputs. This additive printing approach could readily be translated to large scale, low cost, and low carbon …
-
Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices
… introduced and evaluated. The processes such as stencil printing, low-temperature sintering, solder reflowing, epoxy curing, sputtering deposition, electroplating, and patterning of direct-bond copper (DBC) were tightly controlled to ensure high-quality packaging with improved performance. …
-
ELECTRICAL AND MECHANICAL CHARACTERIZATION OF MWNT FILLED CONDUCTIVE ADHESIVE FOR ELECTRONICS PACKAGING
… such as pressure dispensing, screen and stencil printing are used to simplify the processing method and raise the assembly yields. Contact resistance, volume resistivity, high frequency performance, thermal conductivity and mechanical properties were measured and compared with metal …
-
Advanced Manufacturing of Microengineered Ionic Polymer Metal Composites for Enhanced Sensing Capabilities
… electrode interface with 3D inkjet-printed and stencil-printed microfeatures is examined for the creation of eIPMC compression sensors with enhanced sensing capabilities.The first chapter provides a thorough review of the background of IPMC sensortechnology and the connection between the …
-
Nanocellulose Interactions with Protein and Water in Advanced Sensing Systems
… on fluidic wicking. For this purpose, inkjet printing was used to produce hydrophobic channel sidewalls on nanopaper. Alternatively, stencil printing of the fluid-wicking element was applied on hydrophobic supports. These wicking systems showed the potential as new types of LFA devices with …
-
Rheological characterisation of solder pastes and isotropic conductive adhesives (ICAs) for microsystems assembly technology
The printing of solder pastes through very small stencil apertures required for flip-chip pitch sizes, is expected to result in increased stencil clogging and incomplete transfer of paste to the printed circuit board pads. The paste printing process depends on conditions such as good paste roll, …
Page 1 of 2