Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"stiffness modulus"”.
-
Characterisation of Lightly Stabilised Granular Materials by Various Laboratory Testing Methods
… the flexural strength, breaking strain, static stiffness modulus (SSM), dynamic stiffness modulus (DSM) and fatigue life reliably and consistently. An improved IDT testing setup was also developed for directly calculating the Poisson s ratio of lightly stabilised materials. Additionally, the IDT …
-
Development of a New Cold Binder Course Emulsion Asphalt
… (CBEMs). However, to date, low early life stiffness, a slower rate of curing, the length of time necessary to achieve full strength, high air void contents and the presence of moisture in these mixtures have prevented them from being fully embraced by pavement authorities. This led to them …
-
HIGH STRENGTH COLD ROLLED ASPHALT SURFACE COURSE MIXTURES
… of the produced CRA mixtures. Indirect Tensile Stiffness Modulus (ITSM), Uniaxial Compression Cyclic Test (UCCT), Four Point Bending fatigue test on prismatic shaped specimens (4PB) and Semi-Circular Bending monotonic test (SCB) were used to assess the mechanical properties of these mixtures …
-
FLEXURAL PROPERTIES OF PREMIUM VERSUS INEXPENSIVE NICKEL-TITANIUM ORTHODONTIC ARCHWIRES: AN IN VITRO COMPARISON
… converted to an Excel file for analysis. Wire stiffness and force values calculated. One-way ANOVA was performed to compare group means. Variances analyzed with Levene’s Test to compare the consistency of each wire brand. Dunnett T3 post hoc test performed due to unequal variances. Bonferroni …
-
Ανάπτυξη αλγορίθμων εκτίμησης του δυναμικού μέτρου δυσκαμψίας ασφαλτομιγμάτων
… of an asphalt mix is expressed through the stiffness modulus, which is a key parameter in characterization, ranking and design of mixes as well as in pavement design and therefore in the prediction of pavement performance, quality assurance procedures of new pavements and estimation of the …
-
Modeling and analysis of reinforced granular layer overlaying very soft soil
… and the spacing of the embankment fingers, the stiffness modulus of the reinforcement and the cohesion of the soft soil. The numerical results indicated that these parameters affect the performance of the system in many direct ways. The immediate and final settlement is based on the level the …
-
PARAMETRIC DESIGN AND EXPERIMENTAL VALIDATION OF CONJUGATE STRESS SENSORS FOR STRUCTURAL HEALTH MONITORING
… of sensors of significantly different mechanical stiffness for direct query of the instantaneous local stress-strain relationship in the host structure, thus offering measurement of important health indicators such as stiffness (modulus), yield strength, strain hardening, and cyclic hysteresis. In …
-
A Numerical Investigation of the Seismic Response of the Aggregate Pier Foundation System
… of the aggregate pier include soil density, stiffness modulus, and drainage capacity. The improved ground is influenced by soil stratification, soil properties, pore pressure dissipation, and earthquake time history. Comprehensive numerical modeling using FLAC were performed. The focus of the …
-
Mechanical Properties Of Long Carbon Fiber Reinfroced Thermoplastic (Lft) At Elevated Temperature
… thermoplastics (LFT) possess high specific modulus and strength, superior damage tolerance and fracture toughness and have found increasing use in transportation, military, and aerospace applications. However, one of the impediments to utilizing these materials is the lack of performance …
-
Microstructure and Rheology of Process Cheese
… meltability, toughness, breaking force, apparent stiffness modulus, degree of elasticity, apparent ultimate stress and inversely related to hysteresis and apparent ultimate strain. Tetrasodium pyrophosphate produced the most rapid emulsification of the fat in the cheese and sodium aluminum …
-
Application of Direct Tension Testing to Laboratory Samples to Investigate the Effects of Hot Mix Asphalt Aging
… were conducted on HMA samples to measure mixture stiffness and a Modified Calibrated Mechanistic with Surface Energy (CMSE*) analysis method was used to predict fatigue life. The effect of various mix design parameters was evaluated to understand their importance with respect to the aging …
-
Fundamental Characterisation of Asphalt Overlaid Rigid Pavements
… Rheological evaluation showed increased stiffness, rutting resistance and fatigue life, while viscoelastic behaviour and cracking susceptibility remained stable after long-term ageing. At the mixture level, conductive asphalt achieved 20–38% lower air voids, 40–60% higher stiffness …
-
The Effect of Heat Treatment on the Bending Properties of a Cobalt-Chromium Orthodontic Wire
… bend test at 23oC (room temperature). Stiffness, flexural modulus, percent recovery, and force values were statistically compared using ANOVA (p<0.05). Results: The heat treated wires showed significantly increased force values at the various deflections when compared to their …
-
Effect of cyclic loading on stiffness degradation of Lime cement mixed clays for railway embankment
… train-induced loading, leading to evolving soil stiffness properties over time. Ground improvement techniques, such as lime cementation of clays, have shown promise in enhancing soil conditions. However, the dynamic stiffness properties of these improved soils still uncertain under repeated …
-
Development of a New High Performance Cold Mix Asphalt
… showed an enhancement in indirect tensile stiffness modulus (ITSM) at 3 days curing by approximately 70%, compared with the same mixture containing conventional bitumen emulsion. To eliminate the long curing time required by CBEMs, a new cementitious filler was developed from waste …
-
Strength, stiffness, and stability of solid continua: gravity loading scenario on cross-laminated timber
… been tested. In addition, to characterize the stiffness (modulus of elasticity) of CLT materials, we employed three types of testing, namely, compression test, flexural test, and transverse vibration test. A numerical study is then employed. In order to compute the strength and stiffness of …
-
Bounding recycled aggregate pavement mixtures using hydraulic binders and cold bitumen emulsion.
… Test methods included Indirect Tensile Stiffness Modulus test, Repeated Load Axial test, Indirect Tensile Fatigue test, Compressive Strength test and a novel modification of the Indirect Tensile Strength test was proposed and developed for enhance assessment of performance.The key …
-
Damage Initiation in Unidirectional Polymeric Composites with Manufacturing Induced Irregularities
… as well as the ratio of matrix to fiber stiffness modulus, on the initiation of brittle cavitation are studied. Combined loading consisting of transverse tension and axial shear applied to unidirectional composites is studied next. It is found that under certain axial shear/transverse …
-
Development of Methods for Characterizing Ankle Ligament Viscoelastic Properties
… This resulted in ~8-15% average change in modulus of elasticity. Peak force and hysteresis increased by 80% and 250% respectfully between length estimate strain levels. Ligament differed from in situ pose by about 23o (± 6.6o) and 1.4 mm (± 4.13 mm). Minimal loading rate-dependent …
-
Soil-Spring Model for Fatigue Evaluation of Cyclic-Loaded Offshore Conductors
… for which simplified expressions for secant stiffness and equivalent damping ratio has been presented. The back calculated moments from the Power law and Ramberg-Osgood equations, compared very well with measured bending moments. This study has provided a framework for interpreting and …
Page 1 of 3