Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 68 for “"stirrup"”.
-
Effects of a Tape Cast, Air-Stirrup, and an Air-Stirrup Applied Over a Taped Ankle on Dynamic Ankle Inversion
Objective: To compare the tape cast, and an Air-Stirrup/closed basketweave combination to the Air-Stirrup alone with respect to their effects on dynamic ankle inversion. Design and Setting: This study used a repeated measures design with the independent variables being the exercise bout and the …
-
Anchorage of stirrups in prestressed concrete I-girders
… performance of commonly-used non-code-compliant stirrup detailing in concrete I-girder bridges, specifically when the lower hooks on the stirrups are oriented parallel to the longitudinal prestressing strands and are not bent around any longitudinal bars. Such detailing does not meet the …
-
Anchorage of shear reinforcement in prestressed concrete bridge girders
… has typically used epoxy coated straight legged stirrups anchored in the tension zone as transverse reinforcement in prestressed concrete bridge girders. With the straight legs of the U-shaped stirrups anchored into the bottom flange of the girders, this configuration is readily placed after …
-
Development of prediction and design models for wide concrete beams with various load and support widths
… the contribution of shear strength resisted by stirrups is assessed according to the longitudinal stirrup-legs spacing where the transverse stirrup-legs spacing is neglected. Moreover, the current design Codes neglect the load and support widths to predict the flexural strength. The main concern …
-
Behaviour of fibre-reinforced polymer (FRP) stirrups as shear reinforcement for concrete structures
… reinforcement within a concrete structure, steel stirrups are the first to corrode. Fibre reinforced polymers (FRP) provide an alternative that does not corrode and has many other benefits such as a high strength-to-weight ratio. However, the inherent disadvantages of FRP in certain loading …
-
Distributed Sensing to Assess the Shear Behaviour of Reinforced Concrete Beams
… reinforced concrete specimens with different stirrup spacing and longitudinal reinforcement ratios were instrumented with nylon coated FOS and tested in three point bending to investigate whether FOS could detect differences in behaviour. It was found that distributed strain measurements could …
-
Experimental Investigation of the Shear Behaviour of Slender Concrete Beams Reinforced with GFRP
… a/d ratios of 4.5 and 6.5 were tested to examine stirrup spacing requirements. These specimens were tested under monotonic loading in three-point bending. The results of the experimental program showed strong correlation with existing research on shorter beams. The reduced stiffness of the GFRP …
-
CYCLIC BEHAVIOR of HIGH STRENGTH CONCRETE BEAMS
… reinforcement ratios of 0.68 and 1.02%. Nominal stirrup strength was approximately 170 psi for all specimens. The applied shear stress ranged from 145 to 210 psi. The measured energy dissipation capacity for the beams investigated in this study was compared to specimens fabricated with concrete …
-
Assessment of the Shear Capacity and Condition of Cracked Reinforced Concrete Beams Using Machine Learning
… GPR algorithms to predict shear, stiffness, and stirrup strain histories as a function of crack width as well as geometric, material, and design properties of beams. Training data are collected from the literature and include measurements of crack widths from 118 beams, load-displacement …
-
Novel Weed Management: Design, Construction, And Evaluation Of Two Inter-Row Cultivation Tools, And The Integration Of Vinegar For Intra-Row Weed Control
… blade. The second tool is shaped like a stirrup hoe with a horizontal steel blade. Block and stirrup cultivators were mounted on a toolbar with a traditional S-tine sweep. The tri-part cultivator was tested in 20 non-crop field events. A multivariable model was created to assess the …
-
Flexural and Shear Behaviour of Fibre-Reinforced Concrete Beams Reinforced with GFRP Bars
… parameters including reinforcement ratio, stirrup type, stirrup reinforcement ratio, shear span to depth ratio, and fibre content. The study aims to establish the influence of these parameters on shear capacity, failure mode, and strain variation of stirrup and longitudinal rebar. The …
-
Do Social Norms Predict Equestrians' Likelihood of Using Safety Equipment?
… the use of helmets, protective vests, or safety stirrups. Consistent with prior research, the study found descriptive norms and injunctive norms both influenced the proportion of use of various safety equipment. More specifically, descriptive norms predicted the proportion of helmet and safety …
-
PERFORMANCE OF REPAIRED REINFORCED CONCRETE T-BEAMS
… strengthened with the provision of additional stirrups and galvanised wire mesh in a thickened section cast using non-shrink grout. Three of the beams were strengthened using prefabricated stirrup cages and two types of anchorage system were utilised, through the web and through the flange. The …
-
wa-na-ka-te-ro: σπουδές στην οικονομική οργάνωση και πολιτική γεωγραφία της υστερομινωικής III Κρήτης με αφορμή τη συνθετική ανάλυση των ενεπίγραφων ψευδόστομων αμφορέων που μνημονεύουν τον ηγεμονικό τίτλο
The present dissertation studies stirrup jars inscribed in the Linear B script, focusing on those mentioning the adjective wa-na-ka-te-ro, derivative of the ruler’s title wa-na-ka *?άναξ, which was in use by the ‘palatial’ literate administrations of the Aegean Late Bronze Age [Late Minoan on …
-
The Comparison of Two Supine Manikins and the Use of a Shock and Vibration Isolation System for Litter Patients in Air Medical Transport
… at different locations on the manikins and the stirrup of the litter. The square root of the sum of the squares (RSS) acceleration in the real time was calculated to examine various strap restraint and stirrup clearance configurations and the effects of the use of the air bladder. The results …
-
Shear transfer between precast prestressed bridge beams and in-situ concrete crosshead in continuous structures
… the web) can take this shear force without stirrups. c) There is no need either to project all the bars from the precast into the in-situ concrete or to prestress the connection transversely as a means of improving shear transfer. d) It was possible to transfer the whole shear force at the …
-
Biomechanical effects of ankle bracing during gait
… data. The braces used included the Aircast Air-Stirrup, Aircast Sport-Stirrup, and Active Ankle. Ten healthy and active male subjects, with no history of lower extremity injury, served as subjects for the study. Rearfoot kinematics (Panasonic, 60 Hz) and ground reaction forces (AMTI, 1000 Hz) …
-
Analysis and Optimization for Humane trap Design
<p>The stirrup type spring that is used in the Conibear series of trans was analyzed and new springs for this type of trap were designed utilizing the non-linear optimization technique.</p> <p>The Jacob trap concert combined with the concept of a swinging interior mechanism for animal control was …
-
A Medieval tale: Saxons, Normans and the telscombe ring
… hands, an arcing arrangement representative of stirrup rings; fourth, the heads of two distinctly different beasts positioned at each shoulder of the stirrup bezel. The objective of this research is twofold: first, complete detailed visual and metallurgical analysis to shed light on its use, …
Page 1 of 4